Merge pull request #465 from guruswarupa/main

brightness control(xorg) , Auto login DM, Bootable pendrive maker script, auto power profiling using auto-cpufreq, timeshift backup, samba-ssh server setup

tabs/common-script.sh

@@ -5,6 +5,7 @@
 RC='\033[0m'
 RED='\033[31m'
 YELLOW='\033[33m'
+CYAN='\033[36m'
 GREEN='\033[32m'
 
 command_exists() {

tabs/system-setup/5-samba-ssh-setup.sh

@@ -0,0 +1,205 @@
+#!/bin/sh -e
+
+# Load common script functions
+. ../common-script.sh  
+
+# Function to install packages based on the package manager
+install_package() {
+    PACKAGE=$1
+    if ! command_exists "$PACKAGE"; then
+        case "$PACKAGER" in
+            pacman)
+                $ESCALATION_TOOL "$PACKAGER" -S --noconfirm "$PACKAGE"
+                ;;
+            *)
+                $ESCALATION_TOOL "$PACKAGER" install -y "$PACKAGE"
+                ;;
+        esac
+    else
+        echo "$PACKAGE is already installed."
+    fi
+}       
+
+# Function to setup and configure SSH
+setup_ssh() {
+    printf "%b\n" "${YELLOW}Setting up SSH...${RC}"
+
+    # Detect package manager and install appropriate SSH package
+    case "$PACKAGER" in
+    "apt-get")
+        install_package openssh-server
+        SSH_SERVICE="ssh"
+        ;;
+    "pacman")
+        install_package openssh
+        SSH_SERVICE="sshd"
+        ;;
+    *)
+        install_package openssh-server
+        SSH_SERVICE="sshd"
+        ;;
+    esac
+
+    # Enable and start the appropriate SSH service
+    $ESCALATION_TOOL systemctl enable "$SSH_SERVICE"
+    $ESCALATION_TOOL systemctl start "$SSH_SERVICE"
+
+    # Get the local IP address
+    LOCAL_IP=$(ip -4 addr show | awk '/inet / {print $2}' | tail -n 1)
+
+    printf "%b\n" "${GREEN}Your local IP address is: $LOCAL_IP${RC}"
+
+    # Check if SSH is running
+    if systemctl is-active --quiet "$SSH_SERVICE"; then
+        printf "%b\n" "${GREEN}SSH is up and running.${RC}"
+    else
+        printf "%b\n" "${RED}Failed to start SSH.${RC}"
+    fi
+}
+
+# Function to setup and configure Samba
+setup_samba() {
+    printf "%b\n" "${YELLOW}Setting up Samba...${RC}"
+    
+    # Install Samba if not installed
+    install_package samba
+
+    SAMBA_CONFIG="/etc/samba/smb.conf"
+
+    if [ -f "$SAMBA_CONFIG" ]; then
+        printf "%b\n" "${YELLOW}Samba configuration file already exists in $SAMBA_CONFIG.${RC}"
+        printf "Do you want to modify the existing Samba configuration? (yes/no): "
+        read -r MODIFY_SAMBA
+        if [ "$MODIFY_SAMBA" = "yes" ]; then
+            "$ESCALATION_TOOL" "$EDITOR" "$SAMBA_CONFIG"
+        fi
+    else
+        printf "%b\n" "${YELLOW}No existing Samba configuration found. Setting up a new one...${RC}"
+
+        # Prompt user for shared directory path
+        printf "Enter the path for the Samba share (default: /srv/samba/share): "
+        read -r SHARED_DIR
+        SHARED_DIR=${SHARED_DIR:-/srv/samba/share}
+
+        # Create the shared directory if it doesn't exist
+        $ESCALATION_TOOL mkdir -p "$SHARED_DIR"
+        $ESCALATION_TOOL chmod -R 0777 "$SHARED_DIR"
+
+        # Add a new Samba user
+        echo "Enter Samba username: "
+        read -r SAMBA_USER
+
+        # Loop until the passwords match
+        while true; do
+            echo "Enter Samba password: "
+            stty -echo
+            read -r SAMBA_PASSWORD
+            stty echo
+            echo "Confirm Samba password: "
+            stty -echo
+            read SAMBA_PASSWORD_CONFIRM
+            stty echo
+            echo ""
+            if [ "$SAMBA_PASSWORD" = "$SAMBA_PASSWORD_CONFIRM" ]; then
+                printf "%b\n" "${GREEN}Passwords match.${RC}"
+                break
+            else
+                printf "%b\n" "${RED}Passwords do not match. Please try again.${RC}"
+            fi
+        done
+
+        # Add the user and set the password
+        $ESCALATION_TOOL smbpasswd -a "$SAMBA_USER"
+
+        # Configure Samba settings
+        $ESCALATION_TOOL sh -c "cat > $SAMBA_CONFIG" <<EOL
+[global]
+   workgroup = WORKGROUP
+   server string = Samba Server
+   security = user
+   map to guest = bad user
+   dns proxy = no
+
+[Share]
+   path = $SHARED_DIR
+   browsable = yes
+   writable = yes
+   guest ok = no
+   read only = no
+EOL
+    fi
+
+    # Enable and start Samba services
+    $ESCALATION_TOOL systemctl enable smb nmb
+    $ESCALATION_TOOL systemctl start smb nmb
+
+    # Check if Samba is running
+    if systemctl is-active --quiet smb && systemctl is-active --quiet nmb; then
+        printf "%b\n" "${GREEN}Samba is up and running.${RC}"
+        printf "%b\n" "${YELLOW}Samba share available at: $SHARED_DIR${RC}"
+    else
+        printf "%b\n" "${RED}Failed to start Samba.${RC}"
+    fi
+}
+
+# Function to configure firewall (optional)
+configure_firewall() {
+    printf "%b\n" "${BLUE}Configuring firewall...${RC}"
+
+    if command_exists ufw; then
+        $ESCALATION_TOOL ufw allow OpenSSH
+        $ESCALATION_TOOL ufw allow Samba
+        $ESCALATION_TOOL ufw enable
+        printf "%b\n" "${GREEN}Firewall configured for SSH and Samba.${RC}"
+    else
+        printf "%b\n" "${YELLOW}UFW is not installed. Skipping firewall configuration.${RC}"
+    fi
+}
+
+setup_ssh_samba(){
+    printf "Samba and SSH Setup Script\n"
+    printf "----------------------------\n"
+    clear
+
+    # Display menu
+    printf "Select an option:\n"
+    printf "1. Setup SSH\n"
+    printf "2. Setup Samba\n"
+    printf "3. Configure Firewall\n"
+    printf "4. Setup All\n"
+    printf "5. Exit\n"
+
+    printf "Enter your choice [1-5]: "
+    read CHOICE
+
+    case "$CHOICE" in
+        1)
+            setup_ssh
+            ;;
+        2)
+            setup_samba
+            ;;
+        3)
+            configure_firewall
+            ;;
+        4)
+            setup_ssh
+            setup_samba
+            configure_firewall
+            ;;
+        5)
+            printf "%b\n" "${GREEN}Exiting.${RC}"
+            exit 0
+            ;;
+        *)
+            printf "%b\n" "${RED}Invalid choice. Please enter a number between 1 and 5.${RC}"
+            exit 1
+            ;;
+    esac
+
+    printf "%b\n" "${GREEN}Setup completed.${RC}"
+}
+
+checkEnv
+checkEscalationTool
+setup_ssh_samba

tabs/system-setup/tab_data.toml

@@ -52,6 +52,10 @@ script = "3-global-theme.sh"
 name = "Remove Snaps"
 script = "4-remove-snaps.sh"
 
+[[data]]
+name = "SSH-Samba Setup"
+script = "5-samba-ssh-setup.sh"
+
 [[data]]
 name = "Docker Setup"
-script = "6-docker-setup.sh"
+script = "6-docker-setup.sh"

tabs/utils/auto-login.sh

@@ -0,0 +1,179 @@
+#!/bin/sh -e 
+
+. ../common-script.sh   
+
+# Function to list common session options
+list_sessions() {
+    echo "Select the session:"
+    echo "1) GNOME (gnome.desktop)"
+    echo "2) KDE Plasma (plasma.desktop)"
+    echo "3) XFCE (xfce.desktop)"
+    echo "4) LXDE (LXDE.desktop)"
+    echo "5) LXQt (lxqt.desktop)"
+    echo "6) Cinnamon (cinnamon.desktop)"
+    echo "7) MATE (mate.desktop)"
+    echo "8) Openbox (openbox.desktop)"
+    echo "9) i3 (i3.desktop)"
+    echo "10) Custom session"
+    echo "Enter your choice [1-10]: "
+    read session_choice
+
+    case "$session_choice" in
+        1) session="gnome.desktop" ;;
+        2) session="plasma.desktop" ;;
+        3) session="xfce.desktop" ;;
+        4) session="LXDE.desktop" ;;
+        5) session="lxqt.desktop" ;;
+        6) session="cinnamon.desktop" ;;
+        7) session="mate.desktop" ;;
+        8) session="openbox.desktop" ;;
+        9) session="i3.desktop" ;;
+        10) 
+            echo "Enter custom session name (e.g., mysession.desktop): "
+            read -r session ;;
+        *) 
+            echo "Invalid option selected." 
+            exit 1 ;;
+    esac
+}
+
+# Function to configure LightDM
+configure_lightdm() {
+    echo "Configuring LightDM for autologin..."
+    
+    echo "Enter username for LightDM autologin: "
+    read -r user
+
+    $ESCALATION_TOOL "echo '[Seat:*]' > /etc/lightdm/lightdm.conf.d/50-autologin.conf"
+    $ESCALATION_TOOL "echo 'autologin-user=$user' >> /etc/lightdm/lightdm.conf.d/50-autologin.conf"
+    $ESCALATION_TOOL "echo 'autologin-user-timeout=0' >> /etc/lightdm/lightdm.conf.d/50-autologin.conf"
+
+    echo "LightDM has been configured for autologin."
+}
+
+# Function to remove LightDM autologin
+remove_lightdm_autologin() {
+    echo "Removing LightDM autologin configuration..."
+    $ESCALATION_TOOL rm -f /etc/lightdm/lightdm.conf.d/50-autologin.conf
+    echo "LightDM autologin configuration has been removed."
+}
+
+# Function to configure GDM
+configure_gdm() {
+    echo "Configuring GDM for autologin..."
+    
+    echo "Enter username for GDM autologin: "
+    read -r user
+
+    $ESCALATION_TOOL "echo '[daemon]' > /etc/gdm/custom.conf"
+    $ESCALATION_TOOL "echo 'AutomaticLoginEnable = true' >> /etc/gdm/custom.conf"
+    $ESCALATION_TOOL "echo 'AutomaticLogin = $user' >> /etc/gdm/custom.conf"
+
+    echo "GDM has been configured for autologin."
+}
+
+# Function to remove GDM autologin
+remove_gdm_autologin() {
+    echo "Removing GDM autologin configuration..."
+    $ESCALATION_TOOL sed -i '/AutomaticLoginEnable/d' /etc/gdm/custom.conf
+    $ESCALATION_TOOL sed -i '/AutomaticLogin/d' /etc/gdm/custom.conf
+    echo "GDM autologin configuration has been removed."
+}
+
+# Function to configure SDDM
+configure_sddm() {
+    echo "Configuring SDDM for autologin..."
+    
+    echo "Enter username for SDDM autologin: "
+    read -r user
+    list_sessions  # Show session options
+
+    $ESCALATION_TOOL "echo '[Autologin]' > /etc/sddm.conf"
+    $ESCALATION_TOOL "echo 'User=$user' >> /etc/sddm.conf"
+    $ESCALATION_TOOL "echo 'Session=$session' >> /etc/sddm.conf"
+
+    echo "SDDM has been configured for autologin."
+}
+
+# Function to remove SDDM autologin
+remove_sddm_autologin() {
+    echo "Removing SDDM autologin configuration..."
+    $ESCALATION_TOOL sed -i '/\[Autologin\]/,+2d' /etc/sddm.conf
+    echo "SDDM autologin configuration has been removed."
+}
+
+# Function to configure LXDM
+configure_lxdm() {
+    echo "Configuring LXDM for autologin..."
+    
+    echo "Enter username for LXDM autologin: "
+    read -r user
+    list_sessions  # Show session options
+    
+    $ESCALATION_TOOL sed -i "s/^#.*autologin=.*$/autologin=${user}/" /etc/lxdm/lxdm.conf
+    $ESCALATION_TOOL sed -i "s|^#.*session=.*$|session=/usr/bin/${session}|; s|^session=.*$|session=/usr/bin/${session}|" /etc/lxdm/lxdm.conf
+
+    echo "LXDM has been configured for autologin."
+}
+
+# Function to remove LXDM autologin
+remove_lxdm_autologin() {
+    echo "Removing LXDM autologin configuration..."
+    $ESCALATION_TOOL sed -i "s/^autologin=.*$/#autologin=/" /etc/lxdm/lxdm.conf
+    $ESCALATION_TOOL sed -i "s/^session=.*$/#session=/" /etc/lxdm/lxdm.conf
+    echo "LXDM autologin configuration has been removed."
+}
+
+# Function to configure or remove autologin based on user choice
+configure_or_remove_autologin() {
+    echo "Do you want to add or remove autologin?"
+    echo "1) Add autologin"
+    echo "2) Remove autologin"
+    echo "Enter your choice [1-2]: "
+    read action_choice
+
+    if [ "$action_choice" = "1" ]; then
+        echo "Choose the display manager to configure:"
+        echo "1) LightDM"
+        echo "2) GDM"
+        echo "3) SDDM"
+        echo "4) LXDM"
+        echo "Enter your choice [1-4]: "
+        read choice
+
+        case "$choice" in
+            1) configure_lightdm ;;
+            2) configure_gdm ;;
+            3) configure_sddm ;;
+            4) configure_lxdm ;;
+            *) echo "Invalid option selected." ;;
+        esac
+    elif [ "$action_choice" = "2" ]; then
+        echo "Choose the display manager to remove autologin:"
+        echo "1) LightDM"
+        echo "2) GDM"
+        echo "3) SDDM"
+        echo "4) LXDM"
+        echo "Enter your choice [1-4]: "
+        read choice
+
+        case "$choice" in
+            1) remove_lightdm_autologin ;;
+            2) remove_gdm_autologin ;;
+            3) remove_sddm_autologin ;;
+            4) remove_lxdm_autologin ;;
+            *) echo "Invalid option selected." ;;
+        esac
+    else
+        echo "Invalid choice. Exiting..."
+        exit 1
+    fi
+
+    echo "Action completed. Exiting..."
+    exit 0
+}
+
+
+checkEnv
+checkEscalationTool
+configure_or_remove_autologin

tabs/utils/create-bootable-usb.sh

@@ -0,0 +1,193 @@
+#!/bin/sh -e
+
+. ../common-script.sh  
+
+# Function to display usage instructions
+usage() {
+    printf "%b\n" "${RED} Usage: $0 ${RC}"
+    echo "No arguments needed. The script will prompt for ISO path and USB device."
+    exit 1
+}
+
+# Function to display all available block devices
+list_devices() {
+    printf "%b\n" "${YELLOW} Available devices and partitions: ${RC}"
+    echo ""
+    $ESCALATION_TOOL lsblk -o NAME,FSTYPE,SIZE,MOUNTPOINT,LABEL
+    echo ""
+}
+
+# Function to fetch the latest Arch Linux ISO
+fetch_arch_latest_iso() {
+    ARCH_BASE_URL="https://archive.archlinux.org/iso/"
+    ARCH_LATEST=$(curl -s "$ARCH_BASE_URL" | grep -oP '(?<=href=")[0-9]{4}\.[0-9]{2}\.[0-9]{2}(?=/)' | sort -V | tail -1)
+    ARCH_URL="${ARCH_BASE_URL}${ARCH_LATEST}/archlinux-${ARCH_LATEST}-x86_64.iso"
+    printf "%b\n" "${GREEN} Selected Arch Linux (latest) ISO URL: ${RC} $ARCH_URL"
+}
+
+# Function to fetch older Arch Linux ISOs and display in a table format
+fetch_arch_older_isos() {
+    ARCH_BASE_URL="https://archive.archlinux.org/iso/"
+    ARCH_VERSIONS=$(curl -s "$ARCH_BASE_URL" | grep -oP '(?<=href=")[0-9]{4}\.[0-9]{2}\.[0-9]{2}(?=/)' | sort -V)
+
+    # Filter versions to include only those from 2017-04-01 and later
+    MIN_DATE="2017.04.01"
+    ARCH_VERSIONS=$(echo "$ARCH_VERSIONS" | awk -v min_date="$MIN_DATE" '$0 >= min_date')
+
+    if [ -z "$ARCH_VERSIONS" ]; then
+        printf "%b\n" "${RED}No Arch Linux versions found from ${MIN_DATE} onwards.${RC}"
+        exit 1
+    fi
+
+    printf "%b\n" "${YELLOW}Available Arch Linux versions from ${MIN_DATE} onwards:${RC}"
+    
+    COUNTER=1
+    ROW_ITEMS=6  # Number of versions to show per row
+    for VERSION in $ARCH_VERSIONS; do
+        printf "%-5s${YELLOW}%-15s ${RC}" "$COUNTER)" "$VERSION"
+        
+        if [ $(( COUNTER % ROW_ITEMS )) -eq 0 ]; then
+            echo ""  # New line after every 6 versions
+        fi
+        
+        COUNTER=$((COUNTER + 1))
+    done
+    printf "\n"  # New line after the last row
+    printf "Select an Arch Linux version (1-%d): " "$((COUNTER - 1))"
+    read -r ARCH_OPTION
+    ARCH_DIR=$(echo "$ARCH_VERSIONS" | sed -n "${ARCH_OPTION}p")
+    ARCH_URL="${ARCH_BASE_URL}${ARCH_DIR}/archlinux-${ARCH_DIR}-x86_64.iso"
+    printf "%b\n" "${GREEN}Selected Arch Linux (older) ISO URL: $ARCH_URL${RC}"
+}
+
+
+# Function to fetch the latest Debian Linux ISO
+fetch_debian_latest_iso() {
+    DEBIAN_URL=$(curl -s https://www.debian.org/distrib/netinst | grep -oP '(?<=href=")[^"]+debian-[0-9.]+-amd64-netinst.iso(?=")' | head -1)
+    printf "%b\n" "${GREEN} Selected Debian Linux (latest) ISO URL: ${RC} $DEBIAN_URL"
+}
+
+# Function to ask whether to use local or online ISO
+choose_iso_source() {
+    printf "%b\n" "${YELLOW} Do you want to use a local ISO or download online? ${RC}"
+    printf "1) Download online\n"
+    printf "2) Use local ISO\n"
+    printf "\n"
+    printf "Select option (1-2): "
+    read -r ISO_SOURCE_OPTION
+
+    case $ISO_SOURCE_OPTION in
+        1)
+            fetch_iso_urls  # Call the function to fetch online ISO URLs
+            ;;
+        2)
+            printf "Enter the path to the already downloaded ISO file: "
+            read -r ISO_PATH
+            if [ ! -f "$ISO_PATH" ]; then
+                printf "%b\n" "${RED} ISO file not found: $ISO_PATH ${RC}"
+                exit 1
+            fi
+            ;;
+        *)
+            printf "%b\n" "${RED}Invalid option selected. ${RC}"
+            exit 1
+            ;;
+    esac
+}
+
+# Function to fetch ISO URLs
+fetch_iso_urls() {
+    clear
+    printf "%b\n" "${YELLOW}Available ISOs for download:${RC}"
+    echo "1) Arch Linux (latest)"
+    echo "2) Arch Linux (older versions)"
+    echo "3) Debian Linux (latest)"
+    echo ""
+    read -p "Select the ISO you want to download (1-3): " ISO_OPTION
+
+    case $ISO_OPTION in
+        1)
+            fetch_arch_latest_iso
+            ISO_URL=$ARCH_URL
+            ;;
+        2)
+            fetch_arch_older_isos
+            ISO_URL=$ARCH_URL
+            ;;
+        3)
+            fetch_debian_latest_iso
+            ISO_URL=$DEBIAN_URL
+            ;;
+        *)
+            printf "%b\n" "${RED}Invalid option selected.${RC}"
+            exit 1
+            ;;
+    esac
+
+    ISO_PATH=$(basename "$ISO_URL")
+    printf "%b\n" "${YELLOW}Downloading ISO...${RC}"
+    curl -L -o "$ISO_PATH" "$ISO_URL"
+    if [ $? -ne 0 ]; then
+        printf "%b\n" "${RED}Failed to download the ISO file.${RC}"
+        exit 1
+    fi
+}
+
+write_iso(){  
+    clear
+
+     # Ask whether to use a local or online ISO
+    choose_iso_source
+
+    clear
+    # Display all available devices
+    list_devices
+
+    # Prompt user for USB device
+    read -p "Enter the USB device (e.g., /dev/sdX): " USB_DEVICE
+
+    # Verify that the USB device exists
+    if [ ! -b "$USB_DEVICE" ]; then
+        printf "%b\n" "${RED}USB device not found: $USB_DEVICE${RC}"
+        exit 1
+    fi
+
+    # Confirm the device selection with the user
+    printf "%b\n" "${RED}WARNING: This will erase all data on ${USB_DEVICE}. Are you sure you want to continue? (yes/no)${RC}"
+    read -r CONFIRMATION
+
+    if [ "$CONFIRMATION" != "yes" ]; then
+        printf "%b\n" "${YELLOW}Operation cancelled.${RC}"
+        exit 1
+    fi
+
+    # Display progress and create the bootable USB drive
+    printf "%b\n" "${YELLOW}Creating bootable USB drive...${RC}"
+    if ! $ESCALATION_TOOL dd if="$ISO_PATH" of="$USB_DEVICE" bs=4M status=progress oflag=sync; then
+        printf "%b\n" "${RED}Failed to create bootable USB drive${RC}"
+        exit 1
+    fi
+
+    # Sync to ensure all data is written
+    if ! $ESCALATION_TOOL sync; then
+        printf "%b\n" "${RED}Failed to sync data${RC}"                              
+        exit 1
+    fi
+
+    printf "%b\n" "${GREEN}Bootable USB drive created successfully!${RC}"
+
+    # Eject the USB device
+    printf "%b\n" "${YELLOW}Ejecting ${USB_DEVICE}...${RC}"
+    if ! $ESCALATION_TOOL umount "${USB_DEVICE}"* 2>/dev/null; then
+        printf "%b\n" "${RED}Failed to unmount ${USB_DEVICE}${RC}"
+    fi
+    if ! $ESCALATION_TOOL eject "$USB_DEVICE"; then
+        printf "%b\n" "${RED}Failed to eject ${USB_DEVICE}${RC}"
+    fi
+
+    printf "%b\n" "${GREEN}You can safely remove your USB drive. Reinsert the drive to be detected.${RC}"
+}
+
+checkEnv
+checkEscalationTool
+write_iso

tabs/utils/monitor-control/set_brightness.sh

@@ -0,0 +1,85 @@
+#!/bin/sh -e
+
+. ./utility_functions.sh
+
+# Function to adjust brightness for a selected monitor
+adjust_monitor_brightness() {
+    while true; do
+        monitor_list=$(detect_connected_monitors)
+        monitor_array=$(echo "$monitor_list" | tr '\n' ' ')
+        set -- $monitor_array
+        count=1
+
+        clear
+        printf "%b\n" "${YELLOW}=========================================${RC}"
+        printf "%b\n" "${YELLOW}  Adjust Monitor Brightness${RC}"
+        printf "%b\n" "${YELLOW}=========================================${RC}"
+        printf "%b\n" "${YELLOW}Choose a monitor to adjust brightness:${RC}"
+        for monitor in "$@"; do
+            echo "$count. $monitor"
+            count=$((count + 1))
+        done
+
+        echo "Enter the number of the monitor (or 'q' to quit): "
+        read monitor_choice
+
+        if [ "$monitor_choice" = "q" ]; then
+            printf "%b\n" "${RED}Exiting...${RC}"
+            return
+        fi
+
+        if ! echo "$monitor_choice" | grep -qE '^[0-9]+$'; then
+            echo "Invalid selection. Please try again."
+            echo "Press [Enter] to continue..."
+            read dummy
+            continue
+        fi
+
+        if [ "$monitor_choice" -lt 1 ] || [ "$monitor_choice" -gt "$#" ]; then
+            printf "%b\n" "${RED}Invalid selection. Please try again.${RC}"
+            echo "Press [Enter] to continue..."
+            read dummy
+            continue
+        fi
+
+        monitor_name=$(eval echo "\${$monitor_choice}")
+        current_brightness=$(get_current_brightness "$monitor_name")
+
+        # Correctly calculate the brightness percentage
+        current_brightness_percentage=$(awk "BEGIN {printf \"%.0f\", $current_brightness * 100}")
+        printf "%b\n" "${YELLOW}Current brightness for $monitor_name${RC}: ${GREEN}$current_brightness_percentage%${RC}"
+
+        while true; do
+            echo "Enter the new brightness value as a percentage (10 to 100, or 'q' to quit): "
+            read new_brightness_percentage
+
+            if [ "$new_brightness_percentage" = "q" ]; then
+                printf "%b\n" "${RED}Exiting...${RC}"
+                return
+            fi
+
+            # Validate brightness input: accept only values above 10
+            if ! echo "$new_brightness_percentage" | grep -qE '^[0-9]+$' || [ "$new_brightness_percentage" -lt 10 ] || [ "$new_brightness_percentage" -gt 100 ]; then
+                printf "%b\n" "${RED}Invalid brightness value. Please enter a value between 10 and 100.${RC}"
+                continue
+            fi
+
+            # Convert percentage to xrandr brightness value (10% to 0.10)
+            new_brightness=$(awk "BEGIN {printf \"%.2f\", $new_brightness_percentage / 100}")
+
+            echo "Set brightness for $monitor_name to $new_brightness_percentage%? (y/n): "
+            read confirm
+            if [ "$confirm" = "y" ] || [ "$confirm" = "Y" ]; then
+                printf "%b\n" "${GREEN}Setting brightness for $monitor_name to $new_brightness_percentage%${RC}"
+                execute_command "xrandr --output $monitor_name --brightness $new_brightness"
+                printf "%b\n" "${GREEN}Brightness for $monitor_name set to $new_brightness_percentage% successfully.${RC}"
+                break
+            else
+                printf "%b\n" "${RED}Action canceled. Please choose a different brightness value.${RC}"
+            fi
+        done
+    done
+}
+
+# Call the adjust_monitor_brightness function
+adjust_monitor_brightness

tabs/utils/monitor-control/utility_functions.sh

@@ -38,6 +38,12 @@ detect_connected_monitors() {
     echo "$xrandr_output" | grep " connected" | awk '{print $1}'
 }
 
+# Function to get the current brightness for a monitor
+get_current_brightness() {
+    monitor="$1"
+    xrandr --verbose | grep -A 10 "^$monitor connected" | grep "Brightness:" | awk '{print $2}'
+}
+
 # Function to get resolutions for a monitor
 get_unique_resolutions() {
     monitor="$1"
@@ -73,8 +79,9 @@ get_unique_resolutions() {
 # Function to prompt for confirmation
 confirm_action() {
     action="$1"
-    echo "$action"
+    printf "%b\n" "${CYAN}$action${RC}"
-    read -p "Are you sure? (y/n): " confirm
+    printf "%b" "${CYAN}Are you sure? (y/n): ${RC}"
+    read -r confirm
     if echo "$confirm" | grep -qE '^[Yy]$'; then
         return 0
     else

tabs/utils/power-profile.sh

@@ -0,0 +1,100 @@
+#!/bin/sh -e
+
+. ../common-script.sh
+
+installAutoCpufreq() {
+    clear
+    printf "%b\n" "${YELLOW}Checking if auto-cpufreq is already installed...${RC}"
+
+    # Check if auto-cpufreq is already installed
+    if command_exists auto-cpufreq; then
+        printf "%b\n" "${GREEN}auto-cpufreq is already installed.${RC}"
+    else
+        printf "%b\n" "${YELLOW}Installing auto-cpufreq...${RC}"
+
+        # Install git if not already installed
+        if ! command_exists git; then
+            printf "%b\n" "${YELLOW}git not found. Installing git...${RC}"
+            case ${PACKAGER} in
+                pacman)
+                    $ESCALATION_TOOL ${PACKAGER} -S --needed --noconfirm git
+                    ;;
+                *)
+                    $ESCALATION_TOOL ${PACKAGER} install -y git
+                    ;;
+            esac
+        fi
+
+        # Clone the auto-cpufreq repository and run the installer
+        if [ ! -d "auto-cpufreq" ]; then
+            printf "%b\n" "${YELLOW}Cloning auto-cpufreq repository...${RC}"
+            git clone https://github.com/AdnanHodzic/auto-cpufreq.git
+        fi
+
+        case ${PACKAGER} in
+            *)
+                cd auto-cpufreq
+                printf "%b\n" "${YELLOW}Running auto-cpufreq installer...${RC}"
+                $ESCALATION_TOOL ./auto-cpufreq-installer
+                ;;
+        esac
+        cd ..
+    fi
+}
+
+configureAutoCpufreq() {
+    printf "%b\n" "${YELLOW}Configuring auto-cpufreq...${RC}"
+
+    if command_exists auto-cpufreq; then
+        # Check if the system has a battery to determine if it's a laptop
+        if [ -d /sys/class/power_supply/BAT0 ]; then
+            printf "%b\n" "${GREEN}System detected as laptop. Updating auto-cpufreq for laptop...${RC}"
+            $ESCALATION_TOOL auto-cpufreq --force powersave
+        else
+            printf "%b\n" "${GREEN}System detected as desktop. Updating auto-cpufreq for desktop...${RC}"
+            $ESCALATION_TOOL auto-cpufreq --force performance
+        fi
+    else
+        printf "%b\n" "${RED}auto-cpufreq is not installed, skipping configuration.${RC}"
+    fi
+}
+
+removeAutoCpufreqTweak() {
+    printf "%b\n" "${YELLOW}Removing auto-cpufreq tweak...${RC}"
+
+    if command_exists auto-cpufreq; then
+        printf "%b\n" "${YELLOW}Resetting auto-cpufreq configuration...${RC}"
+        $ESCALATION_TOOL auto-cpufreq --force reset
+    else
+        printf "%b\n" "${RED}auto-cpufreq is not installed, skipping removal.${RC}"
+    fi
+}
+
+apply_or_remove_auto_cpufreq() {
+    # Prompt user for action
+    printf "%b\n" "${YELLOW}Do you want to apply the auto-cpufreq tweak or remove it?${RC}"
+    printf "%b\n" "${YELLOW}1) Apply tweak${RC}"
+    printf "%b\n"  "${YELLOW}2) Remove tweak${RC}"
+    printf "%b" "Enter your choice [1/2]: "
+    read -r choice
+
+    case $choice in
+        1)
+            configureAutoCpufreq
+            ;;
+        2)
+            removeAutoCpufreqTweak
+            ;;
+        *)
+            printf "%b\n" "${RED}Invalid choice. Exiting.${RC}"
+            exit 1
+            ;;
+    esac
+
+    printf "%b\n" "${GREEN}auto-cpufreq setup complete.${RC}"
+}
+
+checkEnv
+checkEscalationTool
+installAutoCpufreq
+apply_or_remove_auto_cpufreq

tabs/utils/tab_data.toml

@@ -20,6 +20,22 @@ script = "ollama.sh"
 name = "Service Manager"
 script = "service-control.sh"
 
+[[data]]
+name = "Auto Login"
+script = "auto-login.sh"
+
+[[data]]
+name = "Bootable USB Creator"
+script = "create-bootable-usb.sh"
+
+[[data]]
+name = "Auto Power Profiling"
+script = "power-profile.sh"
+
+[[data]]
+name = "Timeshift Backup"
+script = "timeshift.sh"
+
 [[data]]
 name = "Monitor Control"
 
@@ -73,3 +89,8 @@ script = "monitor-control/scale_monitor.sh"
 name = "Reset Scaling"
 script = "monitor-control/reset_scaling.sh"
 matches = true
+
+[[data.entries]]
+name = "Set Brightness"
+script = "monitor-control/set_brightness.sh"
+matches = true

tabs/utils/timeshift.sh

@@ -0,0 +1,162 @@
+#!/bin/sh -e
+
+. ../common-script.sh
+
+# Function to install Timeshift
+install_timeshift() {
+    clear
+    printf "%b\n" "${YELLOW}Checking if Timeshift is installed...${RC}"
+
+     if ! command_exists timeshift; then
+        case ${PACKAGER} in
+            pacman)
+                $ESCALATION_TOOL "${PACKAGER}" -S --noconfirm timeshift
+                ;;
+            *)
+                $ESCALATION_TOOL "${PACKAGER}" install -y timeshift
+                ;;
+        esac
+    else
+        echo "Timeshift is already installed."
+    fi
+}
+
+# Function to display the menu
+display_menu() {
+    clear
+    printf "%b\n" "${CYAN}Timeshift CLI Automation${RC}"
+    printf "%b\n" "${CYAN}\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-"
+    printf "%b\n" "${CYAN}1) List Snapshots${RC}"
+    printf "%b\n" "${CYAN}2) List Devices${RC}"
+    printf "%b\n" "${CYAN}3) Create Snapshot${RC}"
+    printf "%b\n" "${CYAN}4) Restore Snapshot${RC}"
+    printf "%b\n" "${CYAN}5) Delete Snapshot${RC}"
+    printf "%b\n" "${CYAN}6) Delete All Snapshots${RC}"
+    printf "%b\n" "${CYAN}7) Exit${RC}"
+    printf "%b\n" "${CYAN}\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-"
+}
+
+# Function to list snapshots
+list_snapshots() {
+    printf "%b\n" "${CYAN}Listing snapshots...${RC}"
+    $ESCALATION_TOOL timeshift --list-snapshots
+}
+
+# Function to list devices
+list_devices() {
+    printf "%b\n" "${CYAN}Listing available devices...${RC}"
+    $ESCALATION_TOOL timeshift --list-devices
+}
+
+# Function to create a new snapshot
+create_snapshot() {
+    printf "%b" "${CYAN}Enter a comment for the snapshot (optional): ${RC}"
+    read -r COMMENT
+    printf "%b" "${CYAN}Enter snapshot tag (O,B,H,D,W,M) (leave empty for no tag): ${RC}"
+    read -r TAG
+
+    if [ -z "$COMMENT" ] && [ -z "$TAG" ]; then
+        echo "Creating snapshot with no comment or tag..."
+        $ESCALATION_TOOL timeshift --create
+    elif [ -z "$TAG" ]; then
+        echo "Creating snapshot with no tag..."
+        $ESCALATION_TOOL timeshift --create --comments "$COMMENT"
+    else
+        echo "Creating snapshot with tag: $TAG..."
+        $ESCALATION_TOOL timeshift --create --comments "$COMMENT" --tags "$TAG"
+    fi
+
+    if [ $? -eq 0 ]; then
+        echo "Snapshot created successfully."
+    else
+        echo "Snapshot creation failed."
+    fi
+}
+
+# Function to restore a snapshot
+restore_snapshot() {
+    list_snapshots
+
+    printf "%b" "${CYAN}Enter the snapshot name you want to restore: ${RC}"
+    read -r SNAPSHOT
+    printf "%b" "${CYAN}Enter the target device (e.g., /dev/sda1): ${RC}"
+    read -r TARGET_DEVICE
+    printf "%b" "${CYAN}Do you want to skip GRUB reinstall? (yes/no): ${RC}"
+    read -r SKIP_GRUB
+
+    if [ "$SKIP_GRUB" = "yes" ]; then
+        $ESCALATION_TOOL timeshift --restore --snapshot "$SNAPSHOT" --target-device "$TARGET_DEVICE" --skip-grub --yes
+    else
+        printf "%b" "${CYAN}Enter GRUB device (e.g., /dev/sda): ${RC}"
+        read -r GRUB_DEVICE
+        $ESCALATION_TOOL timeshift --restore --snapshot "$SNAPSHOT" --target-device "$TARGET_DEVICE" --grub-device "$GRUB_DEVICE" --yes
+    fi
+
+    if [ $? -eq 0 ]; then
+        printf "%b\n" "${GREEN}Snapshot restored successfully.${RC}"
+    else
+        printf "%b\n" "${RED}Snapshot restore failed.${RC}"
+    fi
+}
+
+# Function to delete a snapshot
+delete_snapshot() {
+    list_snapshots
+
+    printf "%b" "${CYAN}Enter the snapshot name you want to delete: ${RC}"
+    read -r SNAPSHOT
+
+    printf "%b\n" "${YELLOW}Deleting snapshot $SNAPSHOT...${RC}"
+    $ESCALATION_TOOL timeshift --delete --snapshot "$SNAPSHOT" --yes
+
+    if [ $? -eq 0 ]; then
+        printf "%b\n" "${GREEN}Snapshot deleted successfully.${RC}"
+    else
+        printf "%b\n" "${RED}Snapshot deletion failed.${RC}"
+    fi
+}
+
+# Function to delete all snapshots
+delete_all_snapshots() {
+    printf "%b\n" "${RED}WARNING: This will delete all snapshots!${RC}"
+    printf "%b" "${CYAN}Are you sure? (yes/no): ${RC}"
+    read -r CONFIRMATION
+
+    if [ "$CONFIRMATION" = "yes" ]; then
+        echo "Deleting all snapshots..."
+        $ESCALATION_TOOL timeshift --delete-all --yes
+        if [ $? -eq 0 ]; then
+            printf "%b\n" "${GREEN}All snapshots deleted successfully.${RC}"
+        else
+            printf "%b\n" "${RED}Failed to delete snapshots.${RC}"
+        fi
+    else
+        printf "%b\n" "${RED}Operation cancelled.${RC}"
+    fi
+}
+
+main_menu() {
+while true; do
+    display_menu
+    printf "%b" "${CYAN}Select an option (1-7): ${RC}"
+    read -r OPTION
+
+    case $OPTION in
+        1) list_snapshots ;;
+        2) list_devices ;;
+        3) create_snapshot ;;
+        4) restore_snapshot ;;
+        5) delete_snapshot ;;
+        6) delete_all_snapshots ;;
+        7) printf "%b\n" "${GREEN}Exiting...${RC}"; exit 0 ;;
+        *) printf "%b\n" "${RED}Invalid option. Please try again.${RC}" ;;
+    esac
+    printf "%b" "${CYAN}Press Enter to continue...${RC}"
+    read -r dummy
+done
+}
+
+checkEnv
+checkEscalationTool
+install_timeshift  
+main_menu