From cfa5043b449664695c7db955db075e86a229b379 Mon Sep 17 00:00:00 2001
From: nnyyxxxx <ethanm112806@gmail.com>
Date: Thu, 12 Sep 2024 16:14:50 -0400
Subject: [PATCH] Remove every bashism

---
 tabs/applications-setup/dwmtitus-setup.sh     | 119 +++++++-----------
 tabs/common-script.sh                         |   4 +-
 tabs/security/firewall-baselines.sh           |   4 +-
 tabs/system-setup/1-compile-setup.sh          |   2 +-
 tabs/system-setup/2-gaming-setup.sh           |   2 +-
 tabs/system-setup/3-global-theme.sh           |  18 +--
 tabs/system-setup/arch/paru-setup.sh          |   2 +-
 tabs/system-setup/arch/yay-setup.sh           |   2 +-
 tabs/system-setup/fedora/rpm-fusion-setup.sh  |   4 +-
 tabs/system-setup/system-update.sh            |  10 +-
 tabs/utils/bluetooth-control.sh               |  71 +++++------
 .../monitor-control/auto_detect_displays.sh   |  14 ++-
 .../monitor-control/change_orientation.sh     |  50 ++++----
 tabs/utils/monitor-control/disable_monitor.sh |  46 ++++---
 .../monitor-control/duplicate_displays.sh     |  16 +--
 tabs/utils/monitor-control/enable_monitor.sh  |  51 +++-----
 tabs/utils/monitor-control/extend_displays.sh |  18 ++-
 .../monitor-control/manage_arrangement.sh     |  58 +++++----
 tabs/utils/monitor-control/reset_scaling.sh   |  24 ++--
 tabs/utils/monitor-control/scale_monitor.sh   |  30 ++---
 .../monitor-control/set_primary_monitor.sh    |  32 ++---
 tabs/utils/monitor-control/set_resolutions.sh |  68 +++++-----
 .../monitor-control/utility_functions.sh      |  59 +++++----
 tabs/utils/wifi-control.sh                    |  94 ++++++--------
 24 files changed, 377 insertions(+), 421 deletions(-)

diff --git a/tabs/applications-setup/dwmtitus-setup.sh b/tabs/applications-setup/dwmtitus-setup.sh
index 8c0fc97a..d8b5156a 100644
--- a/tabs/applications-setup/dwmtitus-setup.sh
+++ b/tabs/applications-setup/dwmtitus-setup.sh
@@ -1,4 +1,5 @@
 #!/bin/sh -e
+
 . ../common-script.sh
 
 makeDWM() {
@@ -192,8 +193,8 @@ setupDisplayManager() {
     echo "Setting up Display Manager"
     currentdm="none"
     for dm in gdm sddm lightdm; do
-        if systemctl is-active --quiet $dm.service; then
-            currentdm=$dm
+        if systemctl is-active --quiet "$dm.service"; then
+            currentdm="$dm"
             break
         fi
     done
@@ -203,13 +204,13 @@ setupDisplayManager() {
         echo "No display manager found, installing $DM"
         case "$PACKAGER" in
             pacman)
-                $ESCALATION_TOOL "$PACKAGER" -S --needed --noconfirm $DM
+                $ESCALATION_TOOL "$PACKAGER" -S --needed --noconfirm "$DM"
                 ;;
             apt)
-                $ESCALATION_TOOL "$PACKAGER" install -y $DM
+                $ESCALATION_TOOL "$PACKAGER" install -y "$DM"
                 ;;
             dnf)
-                $ESCALATION_TOOL "$PACKAGER" install -y $DM
+                $ESCALATION_TOOL "$PACKAGER" install -y "$DM"
                 ;;
             *)
                 echo "Unsupported package manager: $PACKAGER"
@@ -217,78 +218,48 @@ setupDisplayManager() {
                 ;;
         esac
         echo "$DM installed successfully"
-        systemctl enable $DM
-
-        # Clear the screen
-        clear
+        systemctl enable "$DM"
 
         # Prompt user for auto-login
-        echo "Do you want to enable auto-login?"
-        echo "Use arrow keys or j/k to navigate, Enter to select"
-        options=("Yes" "No")
-        selected=0
-
-        # Function to print menu
-        print_menu() {
-            for i in "${!options[@]}"; do
-                if [ $i -eq $selected ]; then
-                    echo "> ${options[$i]}"
+        # Using printf instead of echo -n as It's more posix-compliant.
+        printf "Do you want to enable auto-login? (Y/n) "
+        read -r answer
+        case "$answer" in
+            [Yy]*)
+                echo "Configuring SDDM for autologin"
+                SDDM_CONF="/etc/sddm.conf"
+                if [ ! -f "$SDDM_CONF" ]; then
+                    echo "[Autologin]" | sudo tee -a "$SDDM_CONF"
+                    echo "User=$USER" | sudo tee -a "$SDDM_CONF"
+                    echo "Session=dwm" | sudo tee -a "$SDDM_CONF"
                 else
-                    echo "  ${options[$i]}"
+                    sudo sed -i '/^\[Autologin\]/d' "$SDDM_CONF"
+                    sudo sed -i '/^User=/d' "$SDDM_CONF"
+                    sudo sed -i '/^Session=/d' "$SDDM_CONF"
+                    echo "[Autologin]" | sudo tee -a "$SDDM_CONF"
+                    echo "User=$USER" | sudo tee -a "$SDDM_CONF"
+                    echo "Session=dwm" | sudo tee -a "$SDDM_CONF"
                 fi
-            done
-        }
-
-        # Handle user input
-        while true; do
-            print_menu
-            read -rsn1 key
-            case "$key" in
-                $'\x1B')  # ESC sequence for arrow keys
-                    read -rsn2 key
-                    case "$key" in
-                        '[A' | 'k') ((selected > 0)) && ((selected--));;  # Up arrow or k
-                        '[B' | 'j') ((selected < ${#options[@]}-1)) && ((selected++));;  # Down arrow or j
-                    esac
-                    ;;
-                '') break;;  # Enter key
-            esac
-            clear
-        done
-
-        if [ "${options[$selected]}" = "Yes" ]; then
-            echo "Configuring SDDM for autologin"
-            SDDM_CONF="/etc/sddm.conf"
-            if [ ! -f "$SDDM_CONF" ]; then
-                echo "[Autologin]" | sudo tee -a "$SDDM_CONF"
-                echo "User=$USER" | sudo tee -a "$SDDM_CONF"
-                echo "Session=dwm" | sudo tee -a "$SDDM_CONF"
-            else
-                sudo sed -i '/^\[Autologin\]/d' "$SDDM_CONF"
-                sudo sed -i '/^User=/d' "$SDDM_CONF"
-                sudo sed -i '/^Session=/d' "$SDDM_CONF"
-                echo "[Autologin]" | sudo tee -a "$SDDM_CONF"
-                echo "User=$USER" | sudo tee -a "$SDDM_CONF"
-                echo "Session=dwm" | sudo tee -a "$SDDM_CONF"
-            fi
-            echo "Checking if autologin group exists"
-            if ! getent group autologin > /dev/null; then
-                echo "Creating autologin group"
-                sudo groupadd autologin
-            else
-                echo "Autologin group already exists"
-            fi
-            echo "Adding user with UID 1000 to autologin group"
-            USER_UID_1000=$(getent passwd 1000 | cut -d: -f1)
-            if [ -n "$USER_UID_1000" ]; then
-                sudo usermod -aG autologin "$USER_UID_1000"
-                echo "User $USER_UID_1000 added to autologin group"
-            else
-                echo "No user with UID 1000 found - Auto login not possible"
-            fi
-        else
-            echo "Auto-login configuration skipped"
-        fi
+                echo "Checking if autologin group exists"
+                if ! getent group autologin > /dev/null; then
+                    echo "Creating autologin group"
+                    sudo groupadd autologin
+                else
+                    echo "Autologin group already exists"
+                fi
+                echo "Adding user with UID 1000 to autologin group"
+                USER_UID_1000=$(getent passwd 1000 | cut -d: -f1)
+                if [ -n "$USER_UID_1000" ]; then
+                    sudo usermod -aG autologin "$USER_UID_1000"
+                    echo "User $USER_UID_1000 added to autologin group"
+                else
+                    echo "No user with UID 1000 found - Auto login not possible"
+                fi
+                ;;
+            *)
+                echo "Auto-login configuration skipped"
+                ;;
+        esac
     fi
     
 
@@ -302,4 +273,4 @@ setupDWM
 makeDWM
 install_nerd_font
 clone_config_folders
-configure_backgrounds
+configure_backgrounds
\ No newline at end of file
diff --git a/tabs/common-script.sh b/tabs/common-script.sh
index aa338ba6..aa4deae9 100644
--- a/tabs/common-script.sh
+++ b/tabs/common-script.sh
@@ -54,7 +54,7 @@ checkEscalationTool() {
             fi
         done
 
-        echo -e "${RED}Can't find a supported escalation tool${RC}"
+        printf "%b\n" "${RED}Can't find a supported escalation tool${RC}"
         exit 1
     fi
 }
@@ -82,7 +82,7 @@ checkPackageManager() {
     done
 
     if [ -z "${PACKAGER}" ]; then
-        echo -e "${RED}Can't find a supported package manager${RC}"
+        printf "%b\n" "${RED}Can't find a supported package manager${RC}"
         exit 1
     fi
 }
diff --git a/tabs/security/firewall-baselines.sh b/tabs/security/firewall-baselines.sh
index ee0441b6..5abb0c76 100644
--- a/tabs/security/firewall-baselines.sh
+++ b/tabs/security/firewall-baselines.sh
@@ -19,7 +19,7 @@ installPkg() {
 }
 
 configureUFW() {
-    echo -e "${GREEN}Using Chris Titus Recommended Firewall Rules${RC}"
+    printf "%b\n" "${GREEN}Using Chris Titus Recommended Firewall Rules${RC}"
 
     echo "Disabling UFW"
     $ESCALATION_TOOL ufw disable
@@ -40,7 +40,7 @@ configureUFW() {
     $ESCALATION_TOOL ufw default allow outgoing
 
     $ESCALATION_TOOL ufw enable
-    echo -e "${GREEN}Enabled Firewall with Baselines!${RC}"
+    printf "%b\n" "${GREEN}Enabled Firewall with Baselines!${RC}"
 }
 
 checkEnv
diff --git a/tabs/system-setup/1-compile-setup.sh b/tabs/system-setup/1-compile-setup.sh
index 1a45d153..a9d21890 100755
--- a/tabs/system-setup/1-compile-setup.sh
+++ b/tabs/system-setup/1-compile-setup.sh
@@ -5,7 +5,7 @@
 installDepend() {
     ## Check for dependencies.
     DEPENDENCIES='tar tree multitail tldr trash-cli unzip cmake make jq'
-    echo -e "${YELLOW}Installing dependencies...${RC}"
+    printf "%b\n" "${YELLOW}Installing dependencies...${RC}"
     case $PACKAGER in
         pacman)
             if ! grep -q "^\s*\[multilib\]" /etc/pacman.conf; then
diff --git a/tabs/system-setup/2-gaming-setup.sh b/tabs/system-setup/2-gaming-setup.sh
index ce52aea2..74efabe6 100755
--- a/tabs/system-setup/2-gaming-setup.sh
+++ b/tabs/system-setup/2-gaming-setup.sh
@@ -4,7 +4,7 @@
 
 installDepend() {
     ## Check for dependencies.
-    echo -e "${YELLOW}Installing dependencies...${RC}"
+    printf "%b\n" "${YELLOW}Installing dependencies...${RC}"
     if [ "$PACKAGER" = "pacman" ]; then
         if ! grep -q "^\s*\[multilib\]" /etc/pacman.conf; then
             echo "[multilib]" | $ESCALATION_TOOL tee -a /etc/pacman.conf
diff --git a/tabs/system-setup/3-global-theme.sh b/tabs/system-setup/3-global-theme.sh
index 1f9c7cce..c3e360da 100644
--- a/tabs/system-setup/3-global-theme.sh
+++ b/tabs/system-setup/3-global-theme.sh
@@ -3,7 +3,7 @@
 . ../common-script.sh
 
 install_theme_tools() {
-    printf "${YELLOW}Installing theme tools (qt6ct and kvantum)...${RC}\n"
+    printf "%b\n" "${YELLOW}Installing theme tools (qt6ct and kvantum)...${RC}\n"
     case $PACKAGER in
         apt-get)
             $ESCALATION_TOOL apt-get update
@@ -21,14 +21,14 @@ install_theme_tools() {
             $ESCALATION_TOOL pacman -S --needed --noconfirm qt6ct kvantum
             ;;
         *)
-            printf "${RED}Unsupported package manager. Please install qt6ct and kvantum manually.${RC}\n"
+            printf "%b\n" "${RED}Unsupported package manager. Please install qt6ct and kvantum manually.${RC}\n"
             exit 1
             ;;
     esac
 }
 
 configure_qt6ct() {
-    printf "${YELLOW}Configuring qt6ct...${RC}\n"
+    printf "%b\n" "${YELLOW}Configuring qt6ct...${RC}\n"
     mkdir -p "$HOME/.config/qt6ct"
     cat <<EOF > "$HOME/.config/qt6ct/qt6ct.conf"
 [Appearance]
@@ -36,26 +36,26 @@ style=kvantum
 color_scheme=default
 icon_theme=breeze
 EOF
-    printf "${GREEN}qt6ct configured successfully.${RC}\n"
+    printf "%b\n" "${GREEN}qt6ct configured successfully.${RC}\n"
 
     # Add QT_QPA_PLATFORMTHEME to /etc/environment
     if ! grep -q "QT_QPA_PLATFORMTHEME=qt6ct" /etc/environment; then
-        printf "${YELLOW}Adding QT_QPA_PLATFORMTHEME to /etc/environment...${RC}\n"
+        printf "%b\n" "${YELLOW}Adding QT_QPA_PLATFORMTHEME to /etc/environment...${RC}\n"
         echo "QT_QPA_PLATFORMTHEME=qt6ct" | $ESCALATION_TOOL tee -a /etc/environment > /dev/null
-        printf "${GREEN}QT_QPA_PLATFORMTHEME added to /etc/environment.${RC}\n"
+        printf "%b\n" "${GREEN}QT_QPA_PLATFORMTHEME added to /etc/environment.${RC}\n"
     else
-        printf "${GREEN}QT_QPA_PLATFORMTHEME already set in /etc/environment.${RC}\n"
+        printf "%b\n" "${GREEN}QT_QPA_PLATFORMTHEME already set in /etc/environment.${RC}\n"
     fi
 }
 
 configure_kvantum() {
-    printf "${YELLOW}Configuring Kvantum...${RC}\n"
+    printf "%b\n" "${YELLOW}Configuring Kvantum...${RC}\n"
     mkdir -p "$HOME/.config/Kvantum"
     cat <<EOF > "$HOME/.config/Kvantum/kvantum.kvconfig"
 [General]
 theme=Breeze
 EOF
-    printf "${GREEN}Kvantum configured successfully.${RC}\n"
+    printf "%b\n" "${GREEN}Kvantum configured successfully.${RC}\n"
 }
 
 checkEnv
diff --git a/tabs/system-setup/arch/paru-setup.sh b/tabs/system-setup/arch/paru-setup.sh
index 8b9f388d..51edfb09 100755
--- a/tabs/system-setup/arch/paru-setup.sh
+++ b/tabs/system-setup/arch/paru-setup.sh
@@ -1,6 +1,6 @@
 #!/bin/sh -e
 
-. "$(dirname "$0")/../../common-script.sh"
+. ../../common-script.sh
 
 installDepend() {
     case $PACKAGER in
diff --git a/tabs/system-setup/arch/yay-setup.sh b/tabs/system-setup/arch/yay-setup.sh
index b248ef51..010192ce 100755
--- a/tabs/system-setup/arch/yay-setup.sh
+++ b/tabs/system-setup/arch/yay-setup.sh
@@ -1,6 +1,6 @@
 #!/bin/sh -e
 
-. "$(dirname "$0")/../../common-script.sh"
+. ../../common-script.sh
 
 installDepend() {
     case $PACKAGER in
diff --git a/tabs/system-setup/fedora/rpm-fusion-setup.sh b/tabs/system-setup/fedora/rpm-fusion-setup.sh
index 19003837..52396d5d 100644
--- a/tabs/system-setup/fedora/rpm-fusion-setup.sh
+++ b/tabs/system-setup/fedora/rpm-fusion-setup.sh
@@ -1,13 +1,13 @@
 #!/bin/sh -e
 
-. "$(dirname "$0")/../../common-script.sh"
+. ../../common-script.sh
 
 # https://rpmfusion.org/Configuration
 
 installRPMFusion() {
     case $PACKAGER in
         dnf)
-            if [[ ! -e /etc/yum.repos.d/rpmfusion-free.repo || ! -e /etc/yum.repos.d/rpmfusion-nonfree.repo ]]; then
+            if [ ! -e /etc/yum.repos.d/rpmfusion-free.repo ] || [ ! -e /etc/yum.repos.d/rpmfusion-nonfree.repo ]; then
                 echo "Installing RPM Fusion..."
                 $ESCALATION_TOOL "$PACKAGER" install https://mirrors.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm https://mirrors.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm
                 $ESCALATION_TOOL "$PACKAGER" config-manager --enable fedora-cisco-openh264
diff --git a/tabs/system-setup/system-update.sh b/tabs/system-setup/system-update.sh
index 24c5eed2..e6b32af6 100755
--- a/tabs/system-setup/system-update.sh
+++ b/tabs/system-setup/system-update.sh
@@ -20,7 +20,7 @@ fastUpdate() {
 
             $ESCALATION_TOOL rate-mirrors --top-mirrors-number-to-retest=5 --disable-comments --save /etc/pacman.d/mirrorlist --allow-root ${dtype_local}
             if [ $? -ne 0 ] || [ ! -s /etc/pacman.d/mirrorlist ]; then
-                echo -e "${RED}Rate-mirrors failed, restoring backup.${RC}"
+                printf "%b\n" "${RED}Rate-mirrors failed, restoring backup.${RC}"
                 $ESCALATION_TOOL cp /etc/pacman.d/mirrorlist.bak /etc/pacman.d/mirrorlist
             fi
             ;;
@@ -28,7 +28,7 @@ fastUpdate() {
         apt-get|nala)
             $ESCALATION_TOOL apt-get update
             if ! command_exists nala; then
-                $ESCALATION_TOOL apt-get install -y nala || { echo -e "${YELLOW}Falling back to apt-get${RC}"; PACKAGER="apt-get"; }
+                $ESCALATION_TOOL apt-get install -y nala || { printf "%b\n" "${YELLOW}Falling back to apt-get${RC}"; PACKAGER="apt-get"; }
             fi
 
             if [ "${PACKAGER}" = "nala" ]; then
@@ -54,14 +54,14 @@ fastUpdate() {
             $ESCALATION_TOOL ${PACKAGER} -Syu
             ;;
         *)
-            echo -e "${RED}Unsupported package manager: $PACKAGER${RC}"
+            printf "%b\n" "${RED}Unsupported package manager: $PACKAGER${RC}"
             exit 1
             ;;
     esac
 }
 
 updateSystem() {
-    echo -e "${GREEN}Updating system${RC}"
+    printf "%b\n" "${GREEN}Updating system${RC}"
     case ${PACKAGER} in
         nala|apt-get)
             $ESCALATION_TOOL "${PACKAGER}" update -y
@@ -83,7 +83,7 @@ updateSystem() {
             $ESCALATION_TOOL ${PACKAGER} -Syu
             ;;
         *)
-            echo -e "${RED}Unsupported package manager: ${PACKAGER}${RC}"
+            printf "%b\n" "${RED}Unsupported package manager: ${PACKAGER}${RC}"
             exit 1
             ;;
     esac
diff --git a/tabs/utils/bluetooth-control.sh b/tabs/utils/bluetooth-control.sh
index ddb97c65..508d3708 100644
--- a/tabs/utils/bluetooth-control.sh
+++ b/tabs/utils/bluetooth-control.sh
@@ -2,9 +2,9 @@
 
 . ../common-script.sh
 
-# Function to check bluetoothctl is installed
+# Function to check Bluez is installed
 setupBluetooth() {
-    echo "Install bluetoothctl if not already installed..."
+    printf "%b\n" "${YELLOW}Installing Bluez...${RC}"
     if ! command_exists bluetoothctl; then
         case ${PACKAGER} in
             pacman)
@@ -15,39 +15,26 @@ setupBluetooth() {
                 ;;
         esac
     else
-        echo "Bluetoothctl is already installed."
+        printf "%b\n" "${GREEN}Bluez is already installed.${RC}"
     fi
 
     # Check if bluetooth service is running
     if ! systemctl is-active --quiet bluetooth; then
-        echo "Bluetooth service is not running. Starting it now..."
+        printf "%b\n" "${YELLOW}Bluetooth service is not running. Starting it now...${RC}"
         $ESCALATION_TOOL systemctl start bluetooth
         
         if systemctl is-active --quiet bluetooth; then
-            echo "bluetooth service started successfully."
+            printf "%b\n" "${GREEN}Bluetooth service started successfully.${RC}"
         fi
     fi
 }
 
-# Function to display colored text
-colored_echo() {
-    local color=$1
-    local text=$2
-    case $color in
-        red) echo -e "\033[31m$text\033[0m" ;;
-        green) echo -e "\033[32m$text\033[0m" ;;
-        yellow) echo -e "\033[33m$text\033[0m" ;;
-        blue) echo -e "\033[34m$text\033[0m" ;;
-        *) echo "$text" ;;
-    esac
-}
-
 # Function to display the main menu
 main_menu() {
     while true; do
         clear
-        colored_echo blue "Bluetooth Manager"
-        colored_echo blue "================="
+        printf "%b\n" "${YELLOW}Bluetooth Manager${RC}"
+        printf "%b\n" "${YELLOW}=================${RC}"
         echo "1. Scan for devices"
         echo "2. Pair with a device"
         echo "3. Connect to a device"
@@ -55,7 +42,7 @@ main_menu() {
         echo "5. Remove a device"
         echo "0. Exit"
         echo -n "Choose an option: "
-        read -e choice
+        read choice
 
         case $choice in
             1) scan_devices ;;
@@ -64,7 +51,7 @@ main_menu() {
             4) disconnect_device ;;
             5) remove_device ;;
             0) exit 0 ;;
-            *) colored_echo red "Invalid option. Please try again." ;;
+            *) printf "%b\n" "${RED}Invalid option. Please try again.${RC}" ;;
         esac
     done
 }
@@ -72,13 +59,13 @@ main_menu() {
 # Function to scan for devices
 scan_devices() {
     clear
-    colored_echo yellow "Scanning for devices..."
+    printf "%b\n" "${YELLOW}Scanning for devices...${RC}"
     bluetoothctl --timeout 10 scan on
     devices=$(bluetoothctl devices)
     if [ -z "$devices" ]; then
-        colored_echo red "No devices found."
+        printf "%b\n" "${RED}No devices found.${RC}"
     else
-        colored_echo green "Devices found:"
+        printf "%b\n" "${GREEN}Devices found:${RC}"
         echo "$devices"
     fi
     echo "Press any key to return to the main menu..."
@@ -87,49 +74,51 @@ scan_devices() {
 
 # Function to prompt for MAC address using numbers
 prompt_for_mac() {
-    local action=$1
-    local command=$2
-    local prompt_msg=$3
-    local success_msg=$4
-    local failure_msg=$5
+    action=$1
+    command=$2
+    prompt_msg=$3
+    success_msg=$4
+    failure_msg=$5
 
     while true; do
         clear
         devices=$(bluetoothctl devices)
         if [ -z "$devices" ]; then
-            colored_echo red "No devices available. Please scan for devices first."
+            printf "%b\n" "${RED}No devices available. Please scan for devices first.${RC}"
             echo "Press any key to return to the main menu..."
             read -n 1
             return
         fi
 
         # Display devices with numbers
-        IFS=$'\n' read -r -a device_list <<<"$devices"
-        for i in "${!device_list[@]}"; do
-            echo "$((i+1)). ${device_list[$i]}"
+        device_list=$(echo "$devices" | tr '\n' '\n')
+        i=1
+        echo "$device_list" | while IFS= read -r device; do
+            echo "$i. $device"
+            i=$((i + 1))
         done
         echo "0. Exit to main menu"
         echo -n "$prompt_msg"
-        read -e choice
+        read choice
 
         # Validate the choice
-        if [[ $choice =~ ^[0-9]+$ ]] && [ "$choice" -le "${#device_list[@]}" ] && [ "$choice" -gt 0 ]; then
-            device=${device_list[$((choice-1))]}
+        if echo "$choice" | grep -qE '^[0-9]+$' && [ "$choice" -le "$((i - 1))" ] && [ "$choice" -gt 0 ]; then
+            device=$(echo "$device_list" | sed -n "${choice}p")
             mac=$(echo "$device" | awk '{print $2}')
             if bluetoothctl info "$mac" > /dev/null 2>&1; then
                 bluetoothctl $command "$mac" && {
-                    colored_echo green "$success_msg"
+                    printf "%b\n" "${GREEN}$success_msg${RC}"
                     break
                 } || {
-                    colored_echo red "$failure_msg"
+                    printf "%b\n" "${RED}$failure_msg${RC}"
                 }
             else
-                colored_echo red "Invalid MAC address. Please try again."
+                printf "%b\n" "${RED}Invalid MAC address. Please try again.${RC}"
             fi
         elif [ "$choice" -eq 0 ]; then
             return
         else
-            colored_echo red "Invalid choice. Please try again."
+            printf "%b\n" "${RED}Invalid choice. Please try again.${RC}"
         fi
     done
     echo "Press any key to return to the main menu..."
diff --git a/tabs/utils/monitor-control/auto_detect_displays.sh b/tabs/utils/monitor-control/auto_detect_displays.sh
index 86fcdcd9..175ed4dd 100755
--- a/tabs/utils/monitor-control/auto_detect_displays.sh
+++ b/tabs/utils/monitor-control/auto_detect_displays.sh
@@ -2,6 +2,8 @@
 
 . ./utility_functions.sh
 
+. ../../common-script.sh
+
 # Function to auto-detect displays and set common resolution
 auto_detect_displays() {
     if confirm_action "Auto-detect displays and set common resolution?"; then
@@ -13,11 +15,19 @@ auto_detect_displays() {
 
         for monitor in $monitors; do
             resolutions=$(get_unique_resolutions "$monitor")
-            common_resolutions=$(comm -12 <(echo "$common_resolutions") <(echo "$resolutions"))
+            temp_common_resolutions=$(mktemp)
+            temp_resolutions=$(mktemp)
+
+            echo "$common_resolutions" > "$temp_common_resolutions"
+            echo "$resolutions" > "$temp_resolutions"
+
+            common_resolutions=$(comm -12 "$temp_common_resolutions" "$temp_resolutions")
+
+            rm -f "$temp_common_resolutions" "$temp_resolutions"
         done
         
         if [ -z "$common_resolutions" ]; then
-            dialog --msgbox "No common resolution found among connected monitors." 10 60
+            echo "No common resolution found among connected monitors."
             return
         fi
 
diff --git a/tabs/utils/monitor-control/change_orientation.sh b/tabs/utils/monitor-control/change_orientation.sh
index 4ec802d4..8d867965 100755
--- a/tabs/utils/monitor-control/change_orientation.sh
+++ b/tabs/utils/monitor-control/change_orientation.sh
@@ -2,38 +2,42 @@
 
 . ./utility_functions.sh
 
+. ../../common-script.sh
+
 # Function to change monitor orientation
 change_orientation() {
     monitor_list=$(detect_connected_monitors)
-    IFS=$'\n' read -r -a monitor_array <<<"$monitor_list"
+    monitor_array=$(echo "$monitor_list" | tr '\n' ' ')
 
     clear
-    echo -e "${BLUE}=========================================${RESET}"
-    echo -e "${BLUE}  Change Monitor Orientation${RESET}"
-    echo -e "${BLUE}=========================================${RESET}"
-    echo -e "${YELLOW}Choose a monitor to configure:${RESET}"
-    for i in "${!monitor_array[@]}"; do
-        echo -e "$((i + 1)). ${CYAN}${monitor_array[i]}${RESET}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
+    printf "%b\n" "${YELLOW}  Change Monitor Orientation${RC}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
+    printf "%b\n" "${YELLOW}Choose a monitor to configure:${RC}"
+    i=1
+    for monitor in $monitor_array; do
+        printf "%b\n" "$i. ${GREEN}$monitor${RC}"
+        i=$((i + 1))
     done
 
     read -p "Enter the number of the monitor: " monitor_choice
 
-    if ! [[ "$monitor_choice" =~ ^[0-9]+$ ]] || (( monitor_choice < 1 )) || (( monitor_choice > ${#monitor_array[@]} )); then
-        echo -e "${RED}Invalid selection.${RESET}"
+    if ! echo "$monitor_choice" | grep -qE '^[0-9]+$' || [ "$monitor_choice" -lt 1 ] || [ "$monitor_choice" -gt "$((i - 1))" ]; then
+        printf "%b\n" "${RED}Invalid selection.${RC}"
         return
     fi
 
-    monitor_name="${monitor_array[monitor_choice - 1]}"
+    monitor_name=$(echo "$monitor_array" | cut -d' ' -f"$monitor_choice")
 
     clear
-    echo -e "${BLUE}=========================================${RESET}"
-    echo -e "${BLUE}  Set Orientation for $monitor_name${RESET}"
-    echo -e "${BLUE}=========================================${RESET}"
-    echo -e "${YELLOW}Choose orientation:${RESET}"
-    echo -e "1. ${CYAN}Normal${RESET}"
-    echo -e "2. ${CYAN}Left${RESET}"
-    echo -e "3. ${CYAN}Right${RESET}"
-    echo -e "4. ${CYAN}Inverted${RESET}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
+    printf "%b\n" "${YELLOW}  Set Orientation for $monitor_name${RC}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
+    printf "%b\n" "${YELLOW}Choose orientation:${RC}"
+    printf "%b\n" "1. ${GREEN}Normal${RC}"
+    printf "%b\n" "2. ${GREEN}Left${RC}"
+    printf "%b\n" "3. ${GREEN}Right${RC}"
+    printf "%b\n" "4. ${GREEN}Inverted${RC}"
 
     read -p "Enter the number of the orientation: " orientation_choice
 
@@ -42,15 +46,15 @@ change_orientation() {
         2) orientation="left" ;;
         3) orientation="right" ;;
         4) orientation="inverted" ;;
-        *) echo -e "${RED}Invalid selection.${RESET}"; return ;;
+        *) printf "%b\n" "${RED}Invalid selection.${RC}"; return ;;
     esac
 
-    if confirm_action "Change orientation of ${CYAN}$monitor_name${RESET} to ${CYAN}$orientation${RESET}?"; then
-        echo -e "${GREEN}Changing orientation of $monitor_name to $orientation${RESET}"
+    if confirm_action "Change orientation of $monitor_name to $orientation?"; then
+        printf "%b\n" "${GREEN}Changing orientation of $monitor_name to $orientation${RC}"
         execute_command "xrandr --output $monitor_name --rotate $orientation"
-        echo -e "${GREEN}Orientation changed successfully.${RESET}"
+        printf "%b\n" "${GREEN}Orientation changed successfully.${RC}"
     else
-        echo -e "${RED}Action canceled.${RESET}"
+        printf "%b\n" "${RED}Action canceled.${RC}"
     fi
 }
 
diff --git a/tabs/utils/monitor-control/disable_monitor.sh b/tabs/utils/monitor-control/disable_monitor.sh
index b455848b..a1eafc52 100755
--- a/tabs/utils/monitor-control/disable_monitor.sh
+++ b/tabs/utils/monitor-control/disable_monitor.sh
@@ -2,54 +2,50 @@
 
 . ./utility_functions.sh
 
-RESET='\033[0m'
-BOLD='\033[1m'
-RED='\033[31m'
-GREEN='\033[32m'
-YELLOW='\033[33m'
-BLUE='\033[34m'
-CYAN='\033[36m'
+. ../../common-script.sh
 
 # Function to disable a monitor
 disable_monitor() {
     monitor_list=$(detect_connected_monitors)
-    IFS=$'\n' read -r -a monitor_array <<<"$monitor_list"
+    monitor_array=$(echo "$monitor_list" | tr '\n' ' ')
 
     clear
-    echo -e "${BLUE}=========================================${RESET}"
-    echo -e "${BLUE}  Disable Monitor${RESET}"
-    echo -e "${BLUE}=========================================${RESET}"
-    echo -e "${YELLOW}Choose a monitor to disable:${RESET}"
-    for i in "${!monitor_array[@]}"; do
-        echo -e "$((i + 1)). ${CYAN}${monitor_array[i]}${RESET}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
+    printf "%b\n" "${YELLOW}  Disable Monitor${RC}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
+    printf "%b\n" "Choose a monitor to disable:"
+    i=1
+    for monitor in $monitor_array; do
+        printf "%b\n" "$i. ${GREEN}$monitor${RC}"
+        i=$((i + 1))
     done
 
     read -p "Enter the number of the monitor: " monitor_choice
 
-    if ! [[ "$monitor_choice" =~ ^[0-9]+$ ]] || (( monitor_choice < 1 )) || (( monitor_choice > ${#monitor_array[@]} )); then
-        echo -e "${RED}Invalid selection.${RESET}"
+    if ! echo "$monitor_choice" | grep -qE '^[0-9]+$' || [ "$monitor_choice" -lt 1 ] || [ "$monitor_choice" -gt "$((i - 1))" ]; then
+        printf "%b\n" "${RED}Invalid selection.${RC}"
         return
     fi
 
-    monitor_name="${monitor_array[monitor_choice - 1]}"
+    monitor_name=$(echo "$monitor_array" | cut -d' ' -f"$monitor_choice")
 
-    echo -e "${RED}Warning: Disabling the monitor will turn it off and may affect your display setup.${RESET}"
+    printf "%b\n" "${RED}Warning: Disabling the monitor will turn it off and may affect your display setup.${RC}"
     
-    if confirm_action "Do you really want to disable ${CYAN}$monitor_name${RESET}?"; then
-        echo -e "${GREEN}Disabling $monitor_name${RESET}"
+    if confirm_action "Do you really want to disable ${GREEN}$monitor_name${RC}?"; then
+        printf "%b\n" "${GREEN}Disabling $monitor_name${RC}"
         execute_command "xrandr --output $monitor_name --off"
-        echo -e "${GREEN}Monitor $monitor_name disabled successfully.${RESET}"
+        printf "%b\n" "${GREEN}Monitor $monitor_name disabled successfully.${RC}"
     else
-        echo -e "${RED}Action canceled.${RESET}"
+        printf "%b\n" "${RED}Action canceled.${RC}"
     fi
 }
 
 # Function to prompt for confirmation
 confirm_action() {
-    local action="$1"
-    echo -e "${BOLD}${YELLOW}$action${RESET}"
+    action="$1"
+    printf "%b\n" "${YELLOW}$action${RC}"
     read -p "Are you sure? (y/n): " confirm
-    if [[ "$confirm" =~ ^[Yy]$ ]]; then
+    if echo "$confirm" | grep -qE '^[Yy]$'; then
         return 0
     else
         return 1
diff --git a/tabs/utils/monitor-control/duplicate_displays.sh b/tabs/utils/monitor-control/duplicate_displays.sh
index c5cdf01e..aee3a15f 100755
--- a/tabs/utils/monitor-control/duplicate_displays.sh
+++ b/tabs/utils/monitor-control/duplicate_displays.sh
@@ -2,15 +2,17 @@
 
 . ./utility_functions.sh
 
+. ../../common-script.sh
+
 # Function to duplicate displays
 duplicate_displays() {
-  primary=$(detect_connected_monitors | head -n 1)
-  for monitor in $(detect_connected_monitors | tail -n +2); do
-    if confirm_action "Duplicate $monitor to $primary?"; then
-      echo "Duplicating $monitor to $primary"
-      execute_command "xrandr --output $monitor --same-as $primary"
-    fi
-  done
+    primary=$(detect_connected_monitors | head -n 1)
+    for monitor in $(detect_connected_monitors | tail -n +2); do
+        if confirm_action "Duplicate $monitor to $primary?"; then
+            printf "%b\n" "${GREEN}Duplicating $monitor to $primary${RC}"
+            execute_command "xrandr --output $monitor --same-as $primary"
+        fi
+    done
 }
 
 duplicate_displays
diff --git a/tabs/utils/monitor-control/enable_monitor.sh b/tabs/utils/monitor-control/enable_monitor.sh
index 3525771f..6d6ec5b6 100755
--- a/tabs/utils/monitor-control/enable_monitor.sh
+++ b/tabs/utils/monitor-control/enable_monitor.sh
@@ -2,55 +2,40 @@
 
 . ./utility_functions.sh
 
-RESET='\033[0m'
-BOLD='\033[1m'
-RED='\033[31m'
-GREEN='\033[32m'
-YELLOW='\033[33m'
-BLUE='\033[34m'
-CYAN='\033[36m'
+. ../../common-script.sh
 
 # Function to enable a monitor
 enable_monitor() {
     monitor_list=$(detect_connected_monitors)
-    IFS=$'\n' read -r -a monitor_array <<<"$monitor_list"
+    monitor_array=$(echo "$monitor_list" | tr '\n' ' ')
 
     clear
-    echo -e "${BLUE}=========================================${RESET}"
-    echo -e "${BLUE}  Enable Monitor${RESET}"
-    echo -e "${BLUE}=========================================${RESET}"
-    echo -e "${YELLOW}Choose a monitor to enable:${RESET}"
-    for i in "${!monitor_array[@]}"; do
-        echo -e "$((i + 1)). ${CYAN}${monitor_array[i]}${RESET}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
+    printf "%b\n" "${YELLOW}  Enable Monitor${RC}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
+    printf "%b\n" "${YELLOW}Choose a monitor to enable:${RC}"
+    
+    i=1
+    for monitor in $monitor_array; do
+        printf "%b\n" "$i. ${GREEN}$monitor${RC}"
+        i=$((i + 1))
     done
 
     read -p "Enter the number of the monitor: " monitor_choice
 
-    if ! [[ "$monitor_choice" =~ ^[0-9]+$ ]] || (( monitor_choice < 1 )) || (( monitor_choice > ${#monitor_array[@]} )); then
-        echo -e "${RED}Invalid selection.${RESET}"
+    if ! echo "$monitor_choice" | grep -qE '^[0-9]+$' || [ "$monitor_choice" -lt 1 ] || [ "$monitor_choice" -gt "$((i - 1))" ]; then
+        printf "%b\n" "${RED}Invalid selection.${RC}"
         return
     fi
 
-    monitor_name="${monitor_array[monitor_choice - 1]}"
+    monitor_name=$(echo "$monitor_array" | cut -d' ' -f"$monitor_choice")
 
-    if confirm_action "Enable ${CYAN}$monitor_name${RESET}?"; then
-        echo -e "${GREEN}Enabling $monitor_name${RESET}"
+    if confirm_action "Enable $monitor_name?"; then
+        printf "%b\n" "${GREEN}Enabling $monitor_name${RC}"
         execute_command "xrandr --output $monitor_name --auto"
-        echo -e "${GREEN}Monitor $monitor_name enabled successfully.${RESET}"
+        printf "%b\n" "${GREEN}Monitor $monitor_name enabled successfully.${RC}"
     else
-        echo -e "${RED}Action canceled.${RESET}"
-    fi
-}
-
-# Function to prompt for confirmation
-confirm_action() {
-    local action="$1"
-    echo -e "${BOLD}${YELLOW}$action${RESET}"
-    read -p "Are you sure? (y/n): " confirm
-    if [[ "$confirm" =~ ^[Yy]$ ]]; then
-        return 0
-    else
-        return 1
+        printf "%b\n" "${RED}Action canceled.${RC}"
     fi
 }
 
diff --git a/tabs/utils/monitor-control/extend_displays.sh b/tabs/utils/monitor-control/extend_displays.sh
index 4e215bfa..dca8a1b2 100755
--- a/tabs/utils/monitor-control/extend_displays.sh
+++ b/tabs/utils/monitor-control/extend_displays.sh
@@ -2,14 +2,22 @@
 
 . ./utility_functions.sh
 
+. ../../common-script.sh
+
 # Function to extend displays
 extend_displays() {
-    monitors=($(detect_connected_monitors))
-    for ((i=1; i<${#monitors[@]}; i++)); do
-        if confirm_action "Extend ${monitors[$i]} to the right of ${monitors[$((i-1))]}?"; then
-            echo "Extending ${monitors[$i]} to the right of ${monitors[$((i-1))]}"
-            execute_command "xrandr --output ${monitors[$i]} --right-of ${monitors[$((i-1))]}"
+    monitors=$(detect_connected_monitors)
+    monitor_array=$(echo "$monitors" | tr '\n' ' ')
+    i=1
+    for monitor in $monitor_array; do
+        if [ "$i" -gt 1 ]; then
+            prev_monitor=$(echo "$monitor_array" | cut -d' ' -f$((i-1)))
+            if confirm_action "Extend $monitor to the right of $prev_monitor?"; then
+                printf "%b\n" "${GREEN}Extending $monitor to the right of $prev_monitor${RC}"
+                execute_command "xrandr --output $monitor --right-of $prev_monitor"
+            fi
         fi
+        i=$((i + 1))
     done
 }
 
diff --git a/tabs/utils/monitor-control/manage_arrangement.sh b/tabs/utils/monitor-control/manage_arrangement.sh
index 19049814..268b930f 100755
--- a/tabs/utils/monitor-control/manage_arrangement.sh
+++ b/tabs/utils/monitor-control/manage_arrangement.sh
@@ -2,35 +2,39 @@
 
 . ./utility_functions.sh
 
+. ../../common-script.sh
+
 # Function to manage monitor arrangement
 manage_arrangement() {
     monitor_list=$(detect_connected_monitors)
-    IFS=$'\n' read -r -a monitor_array <<<"$monitor_list"
+    monitor_array=$(echo "$monitor_list" | tr '\n' ' ')
 
     clear
-    echo -e "${BLUE}=========================================${RESET}"
-    echo -e "${BLUE}  Manage Monitor Arrangement${RESET}"
-    echo -e "${BLUE}=========================================${RESET}"
-    echo -e "${YELLOW}Choose the monitor to arrange:${RESET}"
-    for i in "${!monitor_array[@]}"; do
-        echo -e "$((i + 1)). ${CYAN}${monitor_array[i]}${RESET}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
+    printf "%b\n" "${YELLOW}  Manage Monitor Arrangement${RC}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
+    printf "%b\n" "${YELLOW}Choose the monitor to arrange:${RC}"
+    i=1
+    for monitor in $monitor_array; do
+        printf "%b\n" "$i. ${YELLOW}$monitor${RC}"
+        i=$((i + 1))
     done
 
     read -p "Enter the number of the monitor to arrange: " monitor_choice
 
-    if ! [[ "$monitor_choice" =~ ^[0-9]+$ ]] || (( monitor_choice < 1 )) || (( monitor_choice > ${#monitor_array[@]} )); then
-        echo -e "${RED}Invalid selection.${RESET}"
+    if ! echo "$monitor_choice" | grep -qE '^[0-9]+$' || [ "$monitor_choice" -lt 1 ] || [ "$monitor_choice" -gt "$((i - 1))" ]; then
+        printf "%b\n" "${RED}Invalid selection.${RC}"
         return
     fi
 
-    monitor_name="${monitor_array[monitor_choice - 1]}"
+    monitor_name=$(echo "$monitor_array" | cut -d' ' -f"$monitor_choice")
 
     clear
-    echo -e "${YELLOW}Choose position relative to other monitors:${RESET}"
-    echo -e "1. ${CYAN}Left of${RESET}"
-    echo -e "2. ${CYAN}Right of${RESET}"
-    echo -e "3. ${CYAN}Above${RESET}"
-    echo -e "4. ${CYAN}Below${RESET}"
+    printf "%b\n" "${YELLOW}Choose position relative to other monitors:${RC}"
+    printf "%b\n" "1. ${YELLOW}Left of${RC}"
+    printf "%b\n" "2. ${YELLOW}Right of${RC}"
+    printf "%b\n" "3. ${YELLOW}Above${RC}"
+    printf "%b\n" "4. ${YELLOW}Below${RC}"
 
     read -p "Enter the number of the position: " position_choice
 
@@ -39,31 +43,31 @@ manage_arrangement() {
         2) position="--right-of" ;;
         3) position="--above" ;;
         4) position="--below" ;;
-        *) echo -e "${RED}Invalid selection.${RESET}"; return ;;
+        *) printf "%b\n" "${RED}Invalid selection.${RC}"; return ;;
     esac
 
-    echo -e "${YELLOW}Choose the reference monitor:${RESET}"
-    for i in "${!monitor_array[@]}"; do
-        if [[ "${monitor_array[i]}" != "$monitor_name" ]]; then
-            echo -e "$((i + 1)). ${CYAN}${monitor_array[i]}${RESET}"
+    printf "%b\n" "${YELLOW}Choose the reference monitor:${RC}"
+    for i in $monitor_array; do
+        if [ "$i" != "$monitor_name" ]; then
+            printf "%b\n" "$((i + 1)). ${YELLOW}$i${RC}"
         fi
     done
 
     read -p "Enter the number of the reference monitor: " ref_choice
 
-    if ! [[ "$ref_choice" =~ ^[0-9]+$ ]] || (( ref_choice < 1 )) || (( ref_choice > ${#monitor_array[@]} )) || (( ref_choice == monitor_choice )); then
-        echo -e "${RED}Invalid selection.${RESET}"
+    if ! echo "$ref_choice" | grep -qE '^[0-9]+$' || [ "$ref_choice" -lt 1 ] || [ "$ref_choice" -gt "$((i - 1))" ] || [ "$ref_choice" -eq "$monitor_choice" ]; then
+        printf "%b\n" "${RED}Invalid selection.${RC}"
         return
     fi
 
-    ref_monitor="${monitor_array[ref_choice - 1]}"
+    ref_monitor=$(echo "$monitor_array" | cut -d' ' -f"$ref_choice")
 
-    if confirm_action "Arrange ${CYAN}$monitor_name${RESET} ${position} ${CYAN}$ref_monitor${RESET}?"; then
-        echo -e "${GREEN}Arranging $monitor_name ${position} $ref_monitor${RESET}"
+    if confirm_action "Arrange ${YELLOW}$monitor_name${RC} ${position} ${YELLOW}$ref_monitor${RC}?"; then
+        printf "%b\n" "${GREEN}Arranging $monitor_name ${position} $ref_monitor${RC}"
         execute_command "xrandr --output $monitor_name $position $ref_monitor"
-        echo -e "${GREEN}Arrangement updated successfully.${RESET}"
+        printf "%b\n" "${GREEN}Arrangement updated successfully.${RC}"
     else
-        echo -e "${RED}Action canceled.${RESET}"
+        printf "%b\n" "${RED}Action canceled.${RC}"
     fi
 }
 
diff --git a/tabs/utils/monitor-control/reset_scaling.sh b/tabs/utils/monitor-control/reset_scaling.sh
index 81308065..ffca6c1b 100755
--- a/tabs/utils/monitor-control/reset_scaling.sh
+++ b/tabs/utils/monitor-control/reset_scaling.sh
@@ -2,22 +2,24 @@
 
 . ./utility_functions.sh
 
-# Function to reset scaling back to 1 (native resolution) for all monitors
-reset_scaling() {
-    echo -e "${BLUE}=========================================${RESET}"
-    echo -e "${BLUE}  Reset Monitor Scaling to Native Resolution${RESET}"
-    echo -e "${BLUE}=========================================${RESET}"
+. ../../common-script.sh
+
+# Function to Reset scaling back to 1 (native resolution) for all monitors
+Reset_scaling() {
+    printf "%b\n" "${YELLOW}=========================================${RC}"
+    printf "%b\n" "${YELLOW}  Reset Monitor Scaling to Native Resolution${RC}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
 
     monitor_list=$(detect_connected_monitors)
-    IFS=$'\n' read -r -a monitor_array <<<"$monitor_list"
+    monitor_array=$(echo "$monitor_list" | tr '\n' ' ')
 
-    for monitor in "${monitor_array[@]}"; do
-        echo -e "${CYAN}Resetting scaling for $monitor to 1x1 (native resolution)${RESET}"
+    for monitor in $monitor_array; do
+        printf "%b\n" "${CYAN}Resetting scaling for $monitor to 1x1 (native resolution)${RC}"
         execute_command "xrandr --output $monitor --scale 1x1"
     done
 
-    echo -e "${GREEN}All monitor scalings have been reset to 1x1.${RESET}"
+    printf "%b\n" "${GREEN}All monitor scalings have been Reset to 1x1.${RC}"
 }
 
-# Call the reset_scaling function
-reset_scaling
+# Call the Reset_scaling function
+Reset_scaling
diff --git a/tabs/utils/monitor-control/scale_monitor.sh b/tabs/utils/monitor-control/scale_monitor.sh
index 708e1fb3..ac386d77 100755
--- a/tabs/utils/monitor-control/scale_monitor.sh
+++ b/tabs/utils/monitor-control/scale_monitor.sh
@@ -2,42 +2,42 @@
 
 . ./utility_functions.sh
 
+. ../../common-script.sh
+
 # Function to scale smaller monitors to the highest resolution of a bigger monitor
 scale_monitors() {
-    echo -e "${BLUE}=========================================${RESET}"
-    echo -e "${BLUE}  Scale Monitors to Highest Resolution${RESET}"
-    echo -e "${BLUE}=========================================${RESET}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
+    printf "%b\n" "${YELLOW}  Scale Monitors to Highest Resolution${RC}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
 
     monitor_list=$(detect_connected_monitors)
-    IFS=$'\n' read -r -a monitor_array <<<"$monitor_list"
+    monitor_array=$(echo "$monitor_list" | tr '\n' ' ')
 
-    # Get the highest resolution among all monitors
     max_width=0
     max_height=0
 
-    for monitor in "${monitor_array[@]}"; do
+    for monitor in $monitor_array; do
         res=$(xrandr | grep -A1 "^$monitor connected" | tail -1 | awk '{print $1}')
-        width=$(echo $res | awk -Fx '{print $1}')
-        height=$(echo $res | awk -Fx '{print $2}')
+        width=$(echo "$res" | awk -Fx '{print $1}')
+        height=$(echo "$res" | awk -Fx '{print $2}')
 
-        if (( width > max_width )); then
+        if [ "$width" -gt "$max_width" ]; then
             max_width=$width
         fi
 
-        if (( height > max_height )); then
+        if [ "$height" -gt "$max_height" ]; then
             max_height=$height
         fi
     done
 
-    echo -e "${CYAN}Highest resolution found: ${max_width}x${max_height}${RESET}"
+    printf "%b\n" "${YELLOW}Highest resolution found: ${max_width}x${max_height}${RC}"
 
-    # Scale all monitors to the maximum resolution
-    for monitor in "${monitor_array[@]}"; do
-        echo -e "${CYAN}Scaling $monitor to ${max_width}x${max_height}${RESET}"
+    for monitor in $monitor_array; do
+        printf "%b\n" "${YELLOW}Scaling $monitor to ${max_width}x${max_height}${RC}"
         execute_command "xrandr --output $monitor --scale-from ${max_width}x${max_height}"
     done
 
-    echo -e "${GREEN}Scaling complete. All monitors are now scaled to ${max_width}x${max_height}.${RESET}"
+    printf "%b\n" "${GREEN}Scaling complete. All monitors are now scaled to ${max_width}x${max_height}.${RC}"
 }
 
 # Call the scale_monitors function
diff --git a/tabs/utils/monitor-control/set_primary_monitor.sh b/tabs/utils/monitor-control/set_primary_monitor.sh
index 752dc784..143a8379 100755
--- a/tabs/utils/monitor-control/set_primary_monitor.sh
+++ b/tabs/utils/monitor-control/set_primary_monitor.sh
@@ -2,35 +2,39 @@
 
 . ./utility_functions.sh
 
+. ../../common-script.sh
+
 # Function to set a monitor as primary
 set_primary_monitor() {
     monitor_list=$(detect_connected_monitors)
-    IFS=$'\n' read -r -a monitor_array <<<"$monitor_list"
+    monitor_array=$(echo "$monitor_list" | tr '\n' ' ')
 
     clear
-    echo -e "${BLUE}=========================================${RESET}"
-    echo -e "${BLUE}  Set Primary Monitor${RESET}"
-    echo -e "${BLUE}=========================================${RESET}"
-    echo -e "${YELLOW}Choose a monitor to set as primary:${RESET}"
-    for i in "${!monitor_array[@]}"; do
-        echo -e "$((i + 1)). ${CYAN}${monitor_array[i]}${RESET}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
+    printf "%b\n" "${YELLOW}  Set Primary Monitor${RC}"
+    printf "%b\n" "${YELLOW}=========================================${RC}"
+    printf "%b\n" "${YELLOW}Choose a monitor to set as primary:${RC}"
+    i=1
+    for monitor in $monitor_array; do
+        printf "%b\n" "$i. ${YELLOW}$monitor${RC}"
+        i=$((i + 1))
     done
 
     read -p "Enter the number of the monitor: " monitor_choice
 
-    if ! [[ "$monitor_choice" =~ ^[0-9]+$ ]] || (( monitor_choice < 1 )) || (( monitor_choice > ${#monitor_array[@]} )); then
-        echo -e "${RED}Invalid selection.${RESET}"
+    if ! echo "$monitor_choice" | grep -qE '^[0-9]+$' || [ "$monitor_choice" -lt 1 ] || [ "$monitor_choice" -gt "$((i - 1))" ]; then
+        printf "%b\n" "${RED}Invalid selection.${RC}"
         return
     fi
 
-    monitor_name="${monitor_array[monitor_choice - 1]}"
+    monitor_name=$(echo "$monitor_array" | cut -d' ' -f"$monitor_choice")
 
-    if confirm_action "Set ${CYAN}$monitor_name${RESET} as the primary monitor?"; then
-        echo -e "${GREEN}Setting $monitor_name as primary monitor${RESET}"
+    if confirm_action "Set $monitor_name as the primary monitor?"; then
+        printf "%b\n" "${GREEN}Setting $monitor_name as primary monitor${RC}"
         execute_command "xrandr --output $monitor_name --primary"
-        echo -e "${GREEN}Monitor $monitor_name set as primary successfully.${RESET}"
+        printf "%b\n" "${GREEN}Monitor $monitor_name set as primary successfully.${RC}"
     else
-        echo -e "${RED}Action canceled.${RESET}"
+        printf "%b\n" "${RED}Action canceled.${RC}"
     fi
 }
 
diff --git a/tabs/utils/monitor-control/set_resolutions.sh b/tabs/utils/monitor-control/set_resolutions.sh
index 2f3cb6a7..1a6c6fa7 100755
--- a/tabs/utils/monitor-control/set_resolutions.sh
+++ b/tabs/utils/monitor-control/set_resolutions.sh
@@ -2,73 +2,68 @@
 
 . ./utility_functions.sh
 
-RESET='\033[0m'
-BOLD='\033[1m'
-RED='\033[31m'
-GREEN='\033[32m'
-YELLOW='\033[33m'
-BLUE='\033[34m'
-CYAN='\033[36m'
+. ../../common-script.sh
 
 # Function to set resolutions
 set_resolutions() {
     monitor_list=$(detect_connected_monitors)
-    IFS=$'\n' read -r -a monitor_array <<<"$monitor_list"
-    
+    monitor_array=$(echo "$monitor_list" | tr '\n' ' ')
+
     while true; do
         clear
-        echo -e "${BLUE}=========================================${RESET}"
-        echo -e "${BLUE}  Monitor Configuration${RESET}"
-        echo -e "${BLUE}=========================================${RESET}"
-        echo -e "${YELLOW}Choose a monitor to configure:${RESET}"
-        for i in "${!monitor_array[@]}"; do
-            echo -e "$((i + 1)). ${CYAN}${monitor_array[i]}${RESET}"
+        printf "%b\n" "${YELLOW}=========================================${RC}"
+        printf "%b\n" "${YELLOW}  Monitor Configuration${RC}"
+        printf "%b\n" "${YELLOW}=========================================${RC}"
+
+        printf "%b\n" "${YELLOW}Choose a monitor to configure:${RC}"
+        i=1
+        for monitor in $monitor_array; do
+            printf "%b\n" "$i. ${YELLOW}$monitor${RC}"
+            i=$((i + 1))
         done
 
         read -p "Enter the choice (or 'q' to quit): " monitor_choice
 
-        if [[ "$monitor_choice" == "q" ]]; then
-            echo -e "${RED}Exiting...${RESET}"
+        if [ "$monitor_choice" = "q" ]; then
+            printf "%b\n" "${RED}Exiting...${RC}"
             return
         fi
 
-        if ! [[ "$monitor_choice" =~ ^[0-9]+$ ]] || (( monitor_choice < 1 )) || (( monitor_choice > ${#monitor_array[@]} )); then
-            echo -e "${RED}Invalid selection. Please try again.${RESET}"
+        if ! echo "$monitor_choice" | grep -qE '^[0-9]+$' || [ "$monitor_choice" -lt 1 ] || [ "$monitor_choice" -gt "$((i - 1))" ]; then
+            printf "%b\n" "${RED}Invalid selection. Please try again.${RC}"
             read -p "Press [Enter] to continue..."
             continue
         fi
 
-        monitor_name="${monitor_array[monitor_choice - 1]}"
+        monitor_name=$(echo "$monitor_array" | cut -d' ' -f"$monitor_choice")
         resolutions=$(get_unique_resolutions "$monitor_name" | sort -rn -t'x' -k1,1 -k2,2)
 
-        # Create a temporary file with resolutions and indices
         temp_res_file=$(mktemp)
         echo "$resolutions" | awk '{print NR " " $0}' > "$temp_res_file"
 
-        # Read the resolutions into an associative array
-        declare -A resolution_map
-        while read -r index resolution; do
-            resolution_map[$index]="$resolution"
+        i=1
+        while read -r resolution; do
+            resolution_map[$i]="$resolution"
+            i=$((i + 1))
         done < "$temp_res_file"
 
         clear
-        echo -e "${BLUE}=========================================${RESET}"
-        echo -e "${BLUE}  Resolution Configuration for ${CYAN}$monitor_name${RESET}"
-        echo -e "${BLUE}=========================================${RESET}"
-        echo -e "${YELLOW}Choose resolution for $monitor_name:${RESET}"
+        printf "%b\n" "${YELLOW}=========================================${RC}"
+        printf "%b\n" "${YELLOW}  Resolution Configuration for ${YELLOW}$monitor_name${RC}"
+        printf "%b\n" "${YELLOW}=========================================${RC}"
         awk '{print $1 ". " $2}' "$temp_res_file"
 
         while true; do
             read -p "Enter the choice (or 'q' to quit): " resolution_choice
 
-            if [[ "$resolution_choice" == "q" ]]; then
-                echo -e "${RED}Exiting...${RESET}"
+            if [ "$resolution_choice" = "q" ]; then
+                printf "%b\n" "${RED}Exiting...${RC}"
                 rm "$temp_res_file"
                 return
             fi
 
-            if ! [[ "$resolution_choice" =~ ^[0-9]+$ ]] || (( resolution_choice < 1 )) || (( resolution_choice > ${#resolution_map[@]} )); then
-                echo -e "${RED}Invalid selection. Please try again.${RESET}"
+            if ! echo "$resolution_choice" | grep -qE '^[0-9]+$' || [ "$resolution_choice" -lt 1 ] || [ "$resolution_choice" -gt "$((i - 1))" ]; then
+                printf "%b\n" "${RED}Invalid selection. Please try again.${RC}"
                 continue
             fi
 
@@ -76,16 +71,15 @@ set_resolutions() {
             selected_resolution=${resolution_map[$resolution_choice]}
 
             read -p "Set resolution for $monitor_name to $selected_resolution? (y/n): " confirm
-            if [[ "$confirm" =~ ^[Yy]$ ]]; then
-                echo -e "${GREEN}Setting resolution for $monitor_name to $selected_resolution${RESET}"
+            if echo "$confirm" | grep -qE '^[Yy]$'; then
+                printf "%b\n" "${GREEN}Setting resolution for $monitor_name to $selected_resolution${RC}"
                 execute_command "xrandr --output $monitor_name --mode $selected_resolution"
                 break
             else
-                echo -e "${RED}Action canceled. Please choose a different resolution.${RESET}"
+                printf "%b\n" "${RED}Action canceled. Please choose a different resolution.${RC}"
             fi
         done
 
-        # Clean up the temporary file
         rm "$temp_res_file"
     done
 }
diff --git a/tabs/utils/monitor-control/utility_functions.sh b/tabs/utils/monitor-control/utility_functions.sh
index bb480390..48b4c8da 100755
--- a/tabs/utils/monitor-control/utility_functions.sh
+++ b/tabs/utils/monitor-control/utility_functions.sh
@@ -2,42 +2,29 @@
 
 . ../../common-script.sh
 
-# Function to check bluetoothctl is installed
+# Function to check xrandr is installed
 setup_xrandr() {
     echo "Install xrandr if not already installed..."
     if ! command_exists xrandr; then
         case ${PACKAGER} in
-        pacman)
-            $ESCALATION_TOOL "${PACKAGER}" -S --noconfirm xorg-xrandr
-            ;;
-        apt-get)
-            $ESCALATION_TOOL "${PACKAGER}" install -y x11-xserver-utils
-            ;;
-        *)
-            $ESCALATION_TOOL "${PACKAGER}" install -y xorg-x11-server-utils
-            ;;
+            pacman)
+                $ESCALATION_TOOL "${PACKAGER}" -S --noconfirm xorg-xrandr
+                ;;
+            apt-get)
+                $ESCALATION_TOOL "${PACKAGER}" install -y x11-xserver-utils
+                ;;
+            *)
+                $ESCALATION_TOOL "${PACKAGER}" install -y xorg-x11-server-utils
+                ;;
         esac
     else
         echo "xrandr is already installed."
     fi
 }
 
-# Function to display colored text
-colored_echo() {
-    local color=$1
-    local text=$2
-    case $color in
-    red) echo -e "\033[31m$text\033[0m" ;;
-    green) echo -e "\033[32m$text\033[0m" ;;
-    yellow) echo -e "\033[33m$text\033[0m" ;;
-    blue) echo -e "\033[34m$text\033[0m" ;;
-    *) echo "$text" ;;
-    esac
-}
-
 # Function to execute xrandr commands and handle errors
 execute_command() {
-    local command="$1"
+    command="$1"
     echo "Executing: $command"
     eval "$command" 2>&1 | tee /tmp/xrandr.log | tail -n 20
     if [ $? -ne 0 ]; then
@@ -53,7 +40,7 @@ detect_connected_monitors() {
 
 # Function to get resolutions for a monitor
 get_unique_resolutions() {
-    local monitor="$1"
+    monitor="$1"
     xrandr_output=$(xrandr)
     # Get available resolutions from xrandr without line limit
     available_resolutions=$(echo "$xrandr_output" | sed -n "/$monitor connected/,/^[^ ]/p" | grep -oP '\d+x\d+' | sort -u)
@@ -61,22 +48,34 @@ get_unique_resolutions() {
     # Define standard resolutions
     standard_resolutions="1920x1080 1280x720 1600x900 2560x1440 3840x2160"
     
+    temp_file=$(mktemp)
+    echo "$available_resolutions" > "$temp_file"
+    
     # Filter standard resolutions to include only those available for the monitor
-    filtered_standard_resolutions=$(echo "$standard_resolutions" | tr ' ' '\n' | grep -xF -f <(echo "$available_resolutions"))
+    filtered_standard_resolutions=$(echo "$standard_resolutions" | tr ' ' '\n' | grep -xF -f "$temp_file")
+    
+    rm "$temp_file"
+    
+    available_res_file=$(mktemp)
+    filtered_standard_res_file=$(mktemp)
+    echo "$available_resolutions" | sort > "$available_res_file"
+    echo "$filtered_standard_resolutions" | sort > "$filtered_standard_res_file"
     
     # Get remaining available resolutions (excluding standard ones)
-    remaining_resolutions=$(comm -23 <(echo "$available_resolutions" | sort) <(echo "$filtered_standard_resolutions" | sort))
+    remaining_resolutions=$(comm -23 "$available_res_file" "$filtered_standard_res_file")
+    
+    rm "$available_res_file" "$filtered_standard_res_file"
     
     # Combine filtered standard resolutions and remaining resolutions, and limit to 10 results
-    echo -e "$filtered_standard_resolutions\n$remaining_resolutions" | head -n 10
+    printf "%b\n" "$filtered_standard_resolutions\n$remaining_resolutions" | head -n 10
 }
 
 # Function to prompt for confirmation
 confirm_action() {
-    local action="$1"
+    action="$1"
     echo "$action"
     read -p "Are you sure? (y/n): " confirm
-    if [[ "$confirm" =~ ^[Yy]$ ]]; then
+    if echo "$confirm" | grep -qE '^[Yy]$'; then
         return 0
     else
         return 1
diff --git a/tabs/utils/wifi-control.sh b/tabs/utils/wifi-control.sh
index 739b127d..036e2a28 100644
--- a/tabs/utils/wifi-control.sh
+++ b/tabs/utils/wifi-control.sh
@@ -4,7 +4,7 @@
 
 # Function to check if NetworkManager is installed
 setupNetworkManager() {
-    echo "Install NetworkManger if not already installed..."
+    printf "%b\n" "${YELLOW}Installing NetworkManager...${RC}"
     if ! command_exists nmcli; then
         case ${PACKAGER} in
             pacman)
@@ -18,39 +18,26 @@ setupNetworkManager() {
                 ;;
         esac
     else
-        echo "NetworkManager is already installed."
+        printf "%b\n" "${YELLOW}NetworkManager is already installed.${RC}"
     fi
     
     # Check if NetworkManager service is running
     if ! systemctl is-active --quiet NetworkManager; then
-        echo "NetworkManager service is not running. Starting it now..."
+        printf "%b\n" "${YELLOW}NetworkManager service is not running. Starting it now...${RC}"
         $ESCALATION_TOOL systemctl start NetworkManager
         
         if systemctl is-active --quiet NetworkManager; then
-            echo "NetworkManager service started successfully."
+            printf "%b\n" "${GREEN}NetworkManager service started successfully.${RC}"
         fi
     fi
 }
 
-# Function to display colored text
-colored_echo() {
-    local color=$1
-    local text=$2
-    case $color in
-        red) echo -e "\033[31m$text\033[0m" ;;
-        green) echo -e "\033[32m$text\033[0m" ;;
-        yellow) echo -e "\033[33m$text\033[0m" ;;
-        blue) echo -e "\033[34m$text\033[0m" ;;
-        *) echo "$text" ;;
-    esac
-}
-
 # Function to display the main menu
 main_menu() {
     while true; do
         clear
-        colored_echo blue "WiFi Manager"
-        colored_echo blue "============"
+        printf "%b\n" "${YELLOW}WiFi Manager${RC}"
+        printf "%b\n" "${YELLOW}============${RC}"
         echo "1. Turn WiFi On"
         echo "2. Turn WiFi Off"
         echo "3. Scan for WiFi networks"
@@ -59,7 +46,7 @@ main_menu() {
         echo "6. Remove a WiFi connection"
         echo "0. Exit"
         echo -n "Choose an option: "
-        read -e choice
+        read choice
 
         case $choice in
             1) wifi_on ;;
@@ -69,7 +56,7 @@ main_menu() {
             5) disconnect_network ;;
             6) remove_network ;;
             0) exit 0 ;;
-            *) colored_echo red "Invalid option. Please try again." ;;
+            *) printf "%b\n" "${RED}Invalid option. Please try again.${RC}" ;;
         esac
     done
 }
@@ -77,12 +64,12 @@ main_menu() {
 # Function to scan for WiFi networks
 scan_networks() {
     clear
-    colored_echo yellow "Scanning for WiFi networks..."
+    printf "%b\n" "${YELLOW}Scanning for WiFi networks...${RC}"
     networks=$(nmcli -t -f SSID,BSSID,SIGNAL dev wifi list | head -n 10)
     if [ -z "$networks" ]; then
-        colored_echo red "No networks found."
+        printf "%b\n" "${RED}No networks found.${RC}"
     else
-        colored_echo green "Top 10 Networks found:"
+        printf "%b\n" "${GREEN}Top 10 Networks found:${RC}"
         echo "$networks" | sed 's/\\//g' | awk -F: '{printf("%d. SSID: %-25s \n", NR, $1)}'
     fi
     echo "Press any key to return to the main menu..."
@@ -92,11 +79,11 @@ scan_networks() {
 # Function to turn WiFi on
 wifi_on() {
     clear
-    colored_echo yellow "Turning WiFi on..."
+    printf "%b\n" "${YELLOW}Turning WiFi on...${RC}"
     nmcli radio wifi on && {
-        colored_echo green "WiFi is now turned on."
+        printf "%b\n" "${GREEN}WiFi is now turned on.${RC}"
     } || {
-        colored_echo red "Failed to turn on WiFi."
+        printf "%b\n" "${RED}Failed to turn on WiFi.${RC}"
     }
     echo "Press any key to return to the main menu..."
     read -n 1
@@ -105,11 +92,11 @@ wifi_on() {
 # Function to turn WiFi off
 wifi_off() {
     clear
-    colored_echo yellow "Turning WiFi off..."
+    printf "%b\n" "${YELLOW}Turning WiFi off...${RC}"
     nmcli radio wifi off && {
-        colored_echo green "WiFi is now turned off."
+        printf "%b\n" "${GREEN}WiFi is now turned off.${RC}"
     } || {
-        colored_echo red "Failed to turn off WiFi."
+        printf "%b\n" "${RED}Failed to turn off WiFi.${RC}"
     }
     echo "Press any key to return to the main menu..."
     read -n 1
@@ -117,64 +104,65 @@ wifi_off() {
 
 # Function to prompt for WiFi network selection
 prompt_for_network() {
-    local action=$1
-    local prompt_msg=$2
-    local success_msg=$3
-    local failure_msg=$4
+    action=$1
+    prompt_msg=$2
+    success_msg=$3
+    failure_msg=$4
 
     while true; do
         clear
         networks=$(nmcli -t -f SSID dev wifi list | head -n 10)
         if [ -z "$networks" ]; then
-            colored_echo red "No networks available. Please scan for networks first."
+            printf "%b\n" "${RED}No networks available. Please scan for networks first.${RC}"
             echo "Press any key to return to the main menu..."
             read -n 1
             return
         fi
-
+        
         # Display networks with numbers
-        IFS=$'\n' read -r -a network_list <<<"$networks"
-        for i in "${!network_list[@]}"; do
-            ssid=$(echo "${network_list[$i]}" | awk -F: '{print $1}')
-            echo "$((i+1)). SSID: $ssid"
+        i=1
+        echo "$networks" | while IFS= read -r network; do
+            ssid=$(echo "$network" | awk -F: '{print $1}')
+            echo "$i. SSID: $ssid"
+            i=$((i + 1))
         done
         echo "0. Exit to main menu"
         echo -n "$prompt_msg"
-        read -e choice
+        read choice
 
         # Validate the choice
-        if [[ $choice =~ ^[0-9]+$ ]] && [ "$choice" -le "${#network_list[@]}" ] && [ "$choice" -gt 0 ]; then
-            network=${network_list[$((choice-1))]}
+        if echo "$choice" | grep -qE '^[0-9]+$' && [ "$choice" -le "$((i - 1))" ] && [ "$choice" -gt 0 ]; then
+            network=$(echo "$networks" | sed -n "${choice}p")
             ssid=$(echo "$network" | awk -F: '{print $1}')
-            if [ "$action" == "connect" ]; then
+            if [ "$action" = "connect" ]; then
                 echo -n "Enter password for SSID $ssid: "
                 read -s password
                 echo
                 nmcli dev wifi connect "$ssid" password "$password" && {
-                    colored_echo green "$success_msg"
+                    printf "%b\n" "${GREEN}$success_msg${RC}"
                     break
                 } || {
-                    colored_echo red "$failure_msg"
+                    printf "%b\n" "${RED}$failure_msg${RC}"
                 }
-            elif [ "$action" == "disconnect" ]; then
+            elif [ "$action" = "disconnect" ]; then
                 nmcli connection down "$ssid" && {
-                    colored_echo green "$success_msg"
+                    printf "%b\n" "${GREEN}$success_msg${RC}"
                     break
                 } || {
-                    colored_echo red "$failure_msg"
+                    printf "%b\n" "${RED}$failure_msg${RC}"
                 }
-            elif [ "$action" == "remove" ]; then
+            elif [ "$action" = "remove" ]; then
                 nmcli connection delete "$ssid" && {
-                    colored_echo green "$success_msg"
+                    printf "%b\n" "${GREEN}$success_msg${RC}"
                     break
                 } || {
-                    colored_echo red "$failure_msg"
+                    printf "%b\n" "${RED}$failure_msg${RC}"
                 }
             fi
         elif [ "$choice" -eq 0 ]; then
             return
         else
-            colored_echo red "Invalid choice. Please try again."
+            printf "%b\n" "${RED}Invalid choice. Please try again.${RC}"
         fi
     done
     echo "Press any key to return to the main menu..."