fix all shellcheck warnings + formatting

core/tabs/applications-setup/Developer-tools/githubdesktop-setup.sh

@@ -6,15 +6,15 @@ installGithubDesktop() {
     if ! command_exists github-desktop; then
         printf "%b\n" "${YELLOW}Installing Github Desktop...${RC}"
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
-                curl -fsSL https://apt.packages.shiftkey.dev/gpg.key | gpg --dearmor | "$ESCALATION_TOOL" tee /usr/share/keyrings/shiftkey-packages.gpg > /dev/null
+                curl -fsSL https://apt.packages.shiftkey.dev/gpg.key | gpg --dearmor | "$ESCALATION_TOOL" tee /usr/share/keyrings/shiftkey-packages.gpg >/dev/null
-                printf "%b\n" 'deb [arch=amd64 signed-by=/usr/share/keyrings/shiftkey-packages.gpg] https://apt.packages.shiftkey.dev/ubuntu/ any main\n' | "$ESCALATION_TOOL" tee /etc/apt/sources.list.d/shiftkey-packages.list > /dev/null
+                printf "%b\n" 'deb [arch=amd64 signed-by=/usr/share/keyrings/shiftkey-packages.gpg] https://apt.packages.shiftkey.dev/ubuntu/ any main\n' | "$ESCALATION_TOOL" tee /etc/apt/sources.list.d/shiftkey-packages.list >/dev/null
                 "$ESCALATION_TOOL" "$PACKAGER" update
                 "$ESCALATION_TOOL" "$PACKAGER" install -y github-desktop
                 ;;
             zypper)
                 "$ESCALATION_TOOL" rpm --import https://rpm.packages.shiftkey.dev/gpg.key
-                printf "%b\n" '[shiftkey-packages]\nname=GitHub Desktop\nbaseurl=https://rpm.packages.shiftkey.dev/rpm/\nenabled=1\ngpgcheck=1\nrepo_gpgcheck=1\ngpgkey=https://rpm.packages.shiftkey.dev/gpg.key\n' | "$ESCALATION_TOOL" tee /etc/zypp/repos.d/shiftkey-packages.repo > /dev/null
+                printf "%b\n" '[shiftkey-packages]\nname=GitHub Desktop\nbaseurl=https://rpm.packages.shiftkey.dev/rpm/\nenabled=1\ngpgcheck=1\nrepo_gpgcheck=1\ngpgkey=https://rpm.packages.shiftkey.dev/gpg.key\n' | "$ESCALATION_TOOL" tee /etc/zypp/repos.d/shiftkey-packages.repo >/dev/null
                 "$ESCALATION_TOOL" "$PACKAGER" refresh
                 "$ESCALATION_TOOL" "$PACKAGER" --non-interactive install github-desktop
                 ;;
@@ -23,7 +23,7 @@ installGithubDesktop() {
                 ;;
             dnf)
                 "$ESCALATION_TOOL" rpm --import https://rpm.packages.shiftkey.dev/gpg.key
-                printf "%b\n" '[shiftkey-packages]\nname=GitHub Desktop\nbaseurl=https://rpm.packages.shiftkey.dev/rpm/\nenabled=1\ngpgcheck=1\nrepo_gpgcheck=1\ngpgkey=https://rpm.packages.shiftkey.dev/gpg.key\n' | "$ESCALATION_TOOL" tee /etc/yum.repos.d/shiftkey-packages.repo > /dev/null
+                printf "%b\n" '[shiftkey-packages]\nname=GitHub Desktop\nbaseurl=https://rpm.packages.shiftkey.dev/rpm/\nenabled=1\ngpgcheck=1\nrepo_gpgcheck=1\ngpgkey=https://rpm.packages.shiftkey.dev/gpg.key\n' | "$ESCALATION_TOOL" tee /etc/yum.repos.d/shiftkey-packages.repo >/dev/null
                 "$ESCALATION_TOOL" "$PACKAGER" install -y github-desktop
                 ;;
             *)

core/tabs/applications-setup/Developer-tools/meld-setup.sh

@@ -9,7 +9,7 @@ installMeld() {
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm meld
                 ;;
-            apt-get|nala)
+            apt-get | nala)
                 "$ESCALATION_TOOL" "$PACKAGER" -y install meld
                 ;;
             *)
@@ -24,4 +24,4 @@ installMeld() {
 
 checkEnv
 checkEscalationTool
-installMeld
+installMeld

core/tabs/applications-setup/Developer-tools/neovim-setup.sh

@@ -15,25 +15,25 @@ cloneNeovim() {
 
 installNeovim() {
     if ! command_exists neovim ripgrep git fzf; then
-    printf "%b\n" "${YELLOW}Installing Neovim...${RC}"
+        printf "%b\n" "${YELLOW}Installing Neovim...${RC}"
-    case "$PACKAGER" in
+        case "$PACKAGER" in
-        pacman)
+            pacman)
-            "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm neovim ripgrep fzf python-virtualenv luarocks go shellcheck git
+                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm neovim ripgrep fzf python-virtualenv luarocks go shellcheck git
-            ;;
+                ;;
-        apt-get|nala)
+            apt-get | nala)
-            "$ESCALATION_TOOL" "$PACKAGER" install -y ripgrep fd-find python3-venv luarocks golang-go shellcheck git
+                "$ESCALATION_TOOL" "$PACKAGER" install -y ripgrep fd-find python3-venv luarocks golang-go shellcheck git
-            curl -sSLo /tmp/nvim.appimage https://github.com/neovim/neovim/releases/latest/download/nvim.appimage
+                curl -sSLo /tmp/nvim.appimage https://github.com/neovim/neovim/releases/latest/download/nvim.appimage
-            chmod u+x /tmp/nvim.appimage
+                chmod u+x /tmp/nvim.appimage
-            "$ESCALATION_TOOL" mv /tmp/nvim.appimage /usr/local/bin/nvim
+                "$ESCALATION_TOOL" mv /tmp/nvim.appimage /usr/local/bin/nvim
-            ;;
+                ;;
-        dnf|zypper)
+            dnf | zypper)
-            "$ESCALATION_TOOL" "$PACKAGER" install -y neovim ripgrep fzf python3-virtualenv luarocks golang ShellCheck git
+                "$ESCALATION_TOOL" "$PACKAGER" install -y neovim ripgrep fzf python3-virtualenv luarocks golang ShellCheck git
-            ;;
+                ;;
-        *)
+            *)
-            printf "%b\n" "${RED}Unsupported package manager: ""$PACKAGER""${RC}"
+                printf "%b\n" "${RED}Unsupported package manager: ""$PACKAGER""${RC}"
-            exit 1
+                exit 1
-            ;;
+                ;;
-    esac
+        esac
     fi
 }
 

core/tabs/applications-setup/Developer-tools/ngrok-setup.sh

@@ -13,4 +13,4 @@ installNgrok() {
 
 checkEnv
 checkEscalationTool
-installNgrok
+installNgrok

core/tabs/applications-setup/Developer-tools/sublime-setup.sh

@@ -6,7 +6,7 @@ installSublime() {
     if ! command_exists sublime; then
         printf "%b\n" "${YELLOW}Installing Sublime...${RC}"
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
                 curl -fsSL https://download.sublimetext.com/sublimehq-pub.gpg | "$ESCALATION_TOOL" apt-key add -
                 echo "deb https://download.sublimetext.com/ apt/stable/" | "$ESCALATION_TOOL" tee /etc/apt/sources.list.d/sublime-text.list
                 "$ESCALATION_TOOL" "$PACKAGER" update

core/tabs/applications-setup/Developer-tools/vscode-setup.sh

@@ -6,17 +6,17 @@ installVsCode() {
     if ! command_exists code; then
         printf "%b\n" "${YELLOW}Installing VS Code..${RC}."
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
-                curl -fsSL https://packages.microsoft.com/keys/microsoft.asc | gpg --dearmor > packages.microsoft.gpg
+                curl -fsSL https://packages.microsoft.com/keys/microsoft.asc | gpg --dearmor >packages.microsoft.gpg
                 "$ESCALATION_TOOL" install -D -o root -g root -m 644 packages.microsoft.gpg /etc/apt/keyrings/packages.microsoft.gpg
-                echo "deb [arch=amd64,arm64,armhf signed-by=/etc/apt/keyrings/packages.microsoft.gpg] https://packages.microsoft.com/repos/code stable main" | "$ESCALATION_TOOL" tee /etc/apt/sources.list.d/vscode.list > /dev/null
+                echo "deb [arch=amd64,arm64,armhf signed-by=/etc/apt/keyrings/packages.microsoft.gpg] https://packages.microsoft.com/repos/code stable main" | "$ESCALATION_TOOL" tee /etc/apt/sources.list.d/vscode.list >/dev/null
                 rm -f packages.microsoft.gpg
                 "$ESCALATION_TOOL" "$PACKAGER" update
                 "$ESCALATION_TOOL" "$PACKAGER" install -y apt-transport-https code
                 ;;
             zypper)
                 "$ESCALATION_TOOL" rpm --import https://packages.microsoft.com/keys/microsoft.asc
-                printf "%b\n" '[code]\nname=Visual Studio Code\nbaseurl=https://packages.microsoft.com/yumrepos/vscode\nenabled=1\ntype=rpm-md\ngpgcheck=1\ngpgkey=https://packages.microsoft.com/keys/microsoft.asc' | "$ESCALATION_TOOL" tee /etc/zypp/repos.d/vscode.repo > /dev/null
+                printf "%b\n" '[code]\nname=Visual Studio Code\nbaseurl=https://packages.microsoft.com/yumrepos/vscode\nenabled=1\ntype=rpm-md\ngpgcheck=1\ngpgkey=https://packages.microsoft.com/keys/microsoft.asc' | "$ESCALATION_TOOL" tee /etc/zypp/repos.d/vscode.repo >/dev/null
                 "$ESCALATION_TOOL" "$PACKAGER" refresh
                 "$ESCALATION_TOOL" "$PACKAGER" --non-interactive install code
                 ;;
@@ -25,7 +25,7 @@ installVsCode() {
                 ;;
             dnf)
                 "$ESCALATION_TOOL" rpm --import https://packages.microsoft.com/keys/microsoft.asc
-                printf "%b\n" '[code]\nname=Visual Studio Code\nbaseurl=https://packages.microsoft.com/yumrepos/vscode\nenabled=1\ngpgcheck=1\ngpgkey=https://packages.microsoft.com/keys/microsoft.asc' | "$ESCALATION_TOOL" tee /etc/yum.repos.d/vscode.repo > /dev/null
+                printf "%b\n" '[code]\nname=Visual Studio Code\nbaseurl=https://packages.microsoft.com/yumrepos/vscode\nenabled=1\ngpgcheck=1\ngpgkey=https://packages.microsoft.com/keys/microsoft.asc' | "$ESCALATION_TOOL" tee /etc/yum.repos.d/vscode.repo >/dev/null
                 "$ESCALATION_TOOL" "$PACKAGER" install -y code
                 ;;
             *)
@@ -41,4 +41,4 @@ installVsCode() {
 checkEnv
 checkEscalationTool
 checkAURHelper
-installVsCode 
+installVsCode

core/tabs/applications-setup/Developer-tools/vscodium-setup.sh

@@ -6,7 +6,7 @@ installVsCodium() {
     if ! command_exists codium; then
         printf "%b\n" "${YELLOW}Installing VS Codium...${RC}"
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
                 curl -fsSL https://gitlab.com/paulcarroty/vscodium-deb-rpm-repo/raw/master/pub.gpg | gpg --dearmor | "$ESCALATION_TOOL" dd of=/usr/share/keyrings/vscodium-archive-keyring.gpg
                 echo 'deb [ signed-by=/usr/share/keyrings/vscodium-archive-keyring.gpg ] https://download.vscodium.com/debs vscodium main' | "$ESCALATION_TOOL" tee /etc/apt/sources.list.d/vscodium.list
                 "$ESCALATION_TOOL" "$PACKAGER" update

core/tabs/applications-setup/alacritty-setup.sh

@@ -4,7 +4,7 @@
 
 installAlacritty() {
     if ! command_exists alacritty; then
-    printf "%b\n" "${YELLOW}Installing Alacritty...${RC}"
+        printf "%b\n" "${YELLOW}Installing Alacritty...${RC}"
         case "$PACKAGER" in
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm alacritty

core/tabs/applications-setup/android-debloat.sh

@@ -3,20 +3,20 @@
 . ../common-script.sh
 
 install_adb() {
-    if ! command_exists adb ; then
+    if ! command_exists adb; then
         printf "%b\n" "${YELLOW}Installing ADB...${RC}."
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y android-sdk-platform-tools
                 ;;
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -S --noconfirm android-tools
                 ;;
-            dnf|zypper)
+            dnf | zypper)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y android-tools
                 ;;
             *)
-                printf "%b\n" "${RED}Unsupported package manager: "$PACKAGER"${RC}"
+                printf "%b\n" "${RED}Unsupported package manager: ${PACKAGER}${RC}"
                 exit 1
                 ;;
         esac
@@ -34,9 +34,9 @@ install_universal_android_debloater() {
     else
         printf "%b\n" "${GREEN}Universal Android Debloater is already installed. Run 'uad' command to execute.${RC}"
     fi
-}                   
+}
 
 checkEnv
 checkEscalationTool
 install_adb
-install_universal_android_debloater 
+install_universal_android_debloater

core/tabs/applications-setup/bottles-setup.sh

@@ -14,4 +14,4 @@ installBottles() {
 checkEnv
 checkEscalationTool
 checkFlatpak
-installBottles
+installBottles

core/tabs/applications-setup/browsers/brave.sh

@@ -6,7 +6,7 @@ installBrave() {
     if ! command_exists brave; then
         printf "%b\n" "${YELLOW}Installing Brave...${RC}"
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y curl
                 "$ESCALATION_TOOL" curl -fsSLo /usr/share/keyrings/brave-browser-archive-keyring.gpg https://brave-browser-apt-release.s3.brave.com/brave-browser-archive-keyring.gpg
                 echo "deb [signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https://brave-browser-apt-release.s3.brave.com/ stable main" | "$ESCALATION_TOOL" tee /etc/apt/sources.list.d/brave-browser-release.list
@@ -42,4 +42,4 @@ installBrave() {
 checkEnv
 checkEscalationTool
 checkAURHelper
-installBrave
+installBrave

core/tabs/applications-setup/browsers/chromium.sh

@@ -3,21 +3,21 @@
 . ../../common-script.sh
 
 installChromium() {
-if ! command_exists chromium; then
+    if ! command_exists chromium; then
-    printf "%b\n" "${YELLOW}Installing Chromium...${RC}"
+        printf "%b\n" "${YELLOW}Installing Chromium...${RC}"
-    case "$PACKAGER" in
+        case "$PACKAGER" in
-        pacman)
+            pacman)
-            "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm chromium
+                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm chromium
-            ;;
+                ;;
-        *)
+            *)
-            "$ESCALATION_TOOL" "$PACKAGER" install -y chromium
+                "$ESCALATION_TOOL" "$PACKAGER" install -y chromium
-            ;;
+                ;;
-    esac
+        esac
-else
+    else
-    printf "%b\n" "${GREEN}Chromium Browser is already installed.${RC}"
+        printf "%b\n" "${GREEN}Chromium Browser is already installed.${RC}"
-fi
+    fi
 }
 
 checkEnv
 checkEscalationTool
-installChromium
+installChromium

core/tabs/applications-setup/browsers/firefox.sh

@@ -6,7 +6,7 @@ installFirefox() {
     if ! command_exists firefox; then
         printf "%b\n" "${YELLOW}Installing Mozilla Firefox...${RC}"
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y firefox-esr
                 ;;
             zypper)

core/tabs/applications-setup/browsers/google-chrome.sh

@@ -6,7 +6,7 @@ installChrome() {
     if ! command_exists google-chrome; then
         printf "%b\n" "${YELLOW}Installing Google Chrome...${RC}"
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
                 curl -O https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
                 "$ESCALATION_TOOL" "$PACKAGER" install -y ./google-chrome-stable_current_amd64.deb
                 ;;
@@ -36,4 +36,4 @@ installChrome() {
 checkEnv
 checkEscalationTool
 checkAURHelper
-installChrome
+installChrome

core/tabs/applications-setup/browsers/librewolf.sh

@@ -6,21 +6,21 @@ installLibreWolf() {
     if ! command_exists librewolf; then
         printf "%b\n" "${YELLOW}Installing Librewolf...${RC}"
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y gnupg lsb-release apt-transport-https ca-certificates
-                distro=`if echo " una bookworm vanessa focal jammy bullseye vera uma " | grep -q " $(lsb_release -sc) "; then lsb_release -sc; else echo focal; fi`
+                distro=$(if echo " una bookworm vanessa focal jammy bullseye vera uma " | grep -q " $(lsb_release -sc) "; then lsb_release -sc; else echo focal; fi)
                 curl -fsSL https://deb.librewolf.net/keyring.gpg | "$ESCALATION_TOOL" gpg --dearmor -o /usr/share/keyrings/librewolf.gpg
                 echo "Types: deb
 URIs: https://deb.librewolf.net
 Suites: $distro
 Components: main
 Architectures: amd64
-Signed-By: /usr/share/keyrings/librewolf.gpg" | "$ESCALATION_TOOL" tee /etc/apt/sources.list.d/librewolf.sources > /dev/null
+Signed-By: /usr/share/keyrings/librewolf.gpg" | "$ESCALATION_TOOL" tee /etc/apt/sources.list.d/librewolf.sources >/dev/null
                 "$ESCALATION_TOOL" "$PACKAGER" update
                 "$ESCALATION_TOOL" "$PACKAGER" install -y librewolf
                 ;;
             dnf)
-                curl -fsSL https://rpm.librewolf.net/librewolf-repo.repo | pkexec tee /etc/yum.repos.d/librewolf.repo > /dev/null
+                curl -fsSL https://rpm.librewolf.net/librewolf-repo.repo | pkexec tee /etc/yum.repos.d/librewolf.repo >/dev/null
                 "$ESCALATION_TOOL" "$PACKAGER" install -y librewolf
                 ;;
             zypper)
@@ -45,4 +45,4 @@ Signed-By: /usr/share/keyrings/librewolf.gpg" | "$ESCALATION_TOOL" tee /etc/apt/
 checkEnv
 checkEscalationTool
 checkAURHelper
-installLibreWolf
+installLibreWolf

core/tabs/applications-setup/browsers/lynx.sh

@@ -20,4 +20,4 @@ installLynx() {
 
 checkEnv
 checkEscalationTool
-installLynx
+installLynx

core/tabs/applications-setup/browsers/thorium.sh

@@ -6,13 +6,13 @@ installThrorium() {
     if ! command_exists thorium-browser; then
         printf "%b\n" "${YELLOW}Installing Thorium Browser...${RC}"
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
                 "$ESCALATION_TOOL" rm -fv /etc/apt/sources.list.d/thorium.list
                 "$ESCALATION_TOOL" curl http://dl.thorium.rocks/debian/dists/stable/thorium.list -o /etc/apt/sources.list.d/thorium.list
                 "$ESCALATION_TOOL" "$PACKAGER" update
                 "$ESCALATION_TOOL" "$PACKAGER" install -y thorium-browser
                 ;;
-            zypper|dnf)
+            zypper | dnf)
                 url=$(curl -s https://api.github.com/repos/Alex313031/Thorium/releases/latest | grep -oP '(?<=browser_download_url": ")[^"]*\.rpm')
                 echo "$url" && curl -L "$url" -o thorium-latest.rpm
                 "$ESCALATION_TOOL" "$PACKAGER" install -y thorium-latest.rpm && rm thorium-latest.rpm
@@ -32,4 +32,4 @@ installThrorium() {
 checkEnv
 checkEscalationTool
 checkAURHelper
-installThrorium
+installThrorium

core/tabs/applications-setup/browsers/vivaldi.sh

@@ -6,7 +6,7 @@ installVivaldi() {
     if ! command_exists vivaldi; then
         printf "%b\n" "${YELLOW}Installing Vivaldi...${RC}"
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y curl
                 "$ESCALATION_TOOL" curl -fsSL https://repo.vivaldi.com/archive/linux_signing_key.pub | gpg --dearmor | sudo dd of=/usr/share/keyrings/vivaldi-browser.gpg
                 "$ESCALATION_TOOL" echo "deb [signed-by=/usr/share/keyrings/vivaldi-browser.gpg arch=$(dpkg --print-architecture)] https://repo.vivaldi.com/archive/deb/ stable main" | sudo dd of=/etc/apt/sources.list.d/vivaldi-archive.list

core/tabs/applications-setup/browsers/waterfox.sh

@@ -7,10 +7,10 @@ installWaterfox() {
         printf "%b\n" "${YELLOW}Installing waterfox...${RC}"
         case "$PACKAGER" in
             pacman)
-		"$AUR_HELPER" -S --needed --noconfirm waterfox-bin
+                "$AUR_HELPER" -S --needed --noconfirm waterfox-bin
                 ;;
             *)
-		. ../setup-flatpak.sh
+                . ../setup-flatpak.sh
                 flatpak install -y flathub net.waterfox.waterfox
                 ;;
         esac

core/tabs/applications-setup/communication-apps/discord-setup.sh

@@ -6,7 +6,7 @@ installDiscord() {
     if ! command_exists discord; then
         printf "%b\n" "${YELLOW}Installing Discord...${RC}"
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
                 curl -Lo discord.deb "https://discord.com/api/download?platform=linux&format=deb"
                 "$ESCALATION_TOOL" "$PACKAGER" install -y discord.deb
                 ;;
@@ -14,14 +14,14 @@ installDiscord() {
                 "$ESCALATION_TOOL" "$PACKAGER" --non-interactive install discord
                 ;;
             pacman)
-                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm discord 
+                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm discord
                 ;;
             dnf)
-                "$ESCALATION_TOOL" "$PACKAGER" install -y https://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm
+                "$ESCALATION_TOOL" "$PACKAGER" install -y https://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-"$(rpm -E %fedora)".noarch.rpm
                 "$ESCALATION_TOOL" "$PACKAGER" install -y discord
                 ;;
             *)
-                printf "%b\n" "${RED}Unsupported package manager: ""$PACKAGER""${RC}"
+                printf "%b\n" "${RED}Unsupported package manager: ${PACKAGER}${RC}"
                 exit 1
                 ;;
         esac
@@ -32,4 +32,4 @@ installDiscord() {
 
 checkEnv
 checkEscalationTool
-installDiscord
+installDiscord

core/tabs/applications-setup/communication-apps/jitsi-setup.sh

@@ -6,9 +6,9 @@ installJitsi() {
     if ! command_exists jitsi-meet; then
         printf "%b\n" "${YELLOW}Installing Jitsi meet...${RC}"
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
-                curl https://download.jitsi.org/jitsi-key.gpg.key | "$ESCALATION_TOOL" gpg --dearmor > /usr/share/keyrings/jitsi-keyring.gpg
+                curl https://download.jitsi.org/jitsi-key.gpg.key | "$ESCALATION_TOOL" gpg --dearmor >/usr/share/keyrings/jitsi-keyring.gpg
-                printf "%b\n" 'deb [signed-by=/usr/share/keyrings/jitsi-keyring.gpg] https://download.jitsi.org stable/' | "$ESCALATION_TOOL" tee /etc/apt/sources.list.d/jitsi-stable.list > /dev/null
+                printf "%b\n" 'deb [signed-by=/usr/share/keyrings/jitsi-keyring.gpg] https://download.jitsi.org stable/' | "$ESCALATION_TOOL" tee /etc/apt/sources.list.d/jitsi-stable.list >/dev/null
                 "$ESCALATION_TOOL" "$PACKAGER" update
                 "$ESCALATION_TOOL" "$PACKAGER" -y install jitsi-meet
                 ;;
@@ -34,4 +34,4 @@ installJitsi() {
 checkEnv
 checkEscalationTool
 checkAURHelper
-installJitsi
+installJitsi

core/tabs/applications-setup/communication-apps/signal-setup.sh

@@ -6,9 +6,8 @@ installSignal() {
     if ! command_exists org.signal.Signal && ! command_exists signal; then
         printf "%b\n" "${YELLOW}Installing Signal...${RC}"
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
-                curl -fsSL https://updates.signal.org/desktop/apt/keys.asc | gpg --dearmor > signal-desktop-keyring.gpg
+                curl -fsSL https://updates.signal.org/desktop/apt/keys.asc | gpg --dearmor | "$ESCALATION_TOOL" tee /usr/share/keyrings/signal-desktop-keyring.gpg >/dev/null
-                cat signal-desktop-keyring.gpg | "$ESCALATION_TOOL" tee /usr/share/keyrings/signal-desktop-keyring.gpg > /dev/null
                 printf "%b\n" 'deb [arch=amd64 signed-by=/usr/share/keyrings/signal-desktop-keyring.gpg] https://updates.signal.org/desktop/apt xenial main' | "$ESCALATION_TOOL" tee /etc/apt/sources.list.d/signal-xenial.list
                 "$ESCALATION_TOOL" "$PACKAGER" update
                 "$ESCALATION_TOOL" "$PACKAGER" -y install signal-desktop
@@ -35,4 +34,4 @@ installSignal() {
 
 checkEnv
 checkEscalationTool
-installSignal
+installSignal

core/tabs/applications-setup/communication-apps/slack-setup.sh

@@ -9,7 +9,7 @@ installSlack() {
             pacman)
                 "$AUR_HELPER" -S --needed --noconfirm slack-desktop
                 ;;
-            *)  
+            *)
                 checkFlatpak
                 flatpak install -y flathub com.slack.Slack
                 ;;
@@ -22,4 +22,4 @@ installSlack() {
 checkEnv
 checkEscalationTool
 checkAURHelper
-installSlack
+installSlack

core/tabs/applications-setup/communication-apps/telegram-setup.sh

@@ -7,10 +7,10 @@ installTelegram() {
         printf "%b\n" "${YELLOW}Installing Telegram...${RC}"
         case "$PACKAGER" in
             pacman)
-                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm telegram-desktop 
+                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm telegram-desktop
                 ;;
             *)
-                "$ESCALATION_TOOL" "$PACKAGER" install -y telegram-desktop 
+                "$ESCALATION_TOOL" "$PACKAGER" install -y telegram-desktop
                 ;;
         esac
     else
@@ -20,4 +20,4 @@ installTelegram() {
 
 checkEnv
 checkEscalationTool
-installTelegram
+installTelegram

core/tabs/applications-setup/communication-apps/thunderbird-setup.sh

@@ -10,7 +10,7 @@ installThunderBird() {
                 "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm thunderbird
                 ;;
             *)
-                "$ESCALATION_TOOL" "$PACKAGER" install -y thunderbird 
+                "$ESCALATION_TOOL" "$PACKAGER" install -y thunderbird
                 ;;
         esac
     else
@@ -20,4 +20,4 @@ installThunderBird() {
 
 checkEnv
 checkEscalationTool
-installThunderBird
+installThunderBird

core/tabs/applications-setup/communication-apps/zoom-setup.sh

@@ -22,4 +22,4 @@ installZoom() {
 checkEnv
 checkEscalationTool
 checkAURHelper
-installZoom
+installZoom

core/tabs/applications-setup/docker-setup.sh

@@ -13,18 +13,30 @@ choose_installation() {
     read -r CHOICE
 
     case "$CHOICE" in
-        1) INSTALL_DOCKER=1; INSTALL_COMPOSE=0 ;;
+        1)
-        2) INSTALL_DOCKER=0; INSTALL_COMPOSE=1 ;;
+            INSTALL_DOCKER=1
-        3) INSTALL_DOCKER=1; INSTALL_COMPOSE=1 ;;
+            INSTALL_COMPOSE=0
-        *) printf "%b\n" "${RED}Invalid choice. Exiting.${RC}"; exit 1 ;;
+            ;;
+        2)
+            INSTALL_DOCKER=0
+            INSTALL_COMPOSE=1
+            ;;
+        3)
+            INSTALL_DOCKER=1
+            INSTALL_COMPOSE=1
+            ;;
+        *)
+            printf "%b\n" "${RED}Invalid choice. Exiting.${RC}"
+            exit 1
+            ;;
     esac
 }
 
 install_docker() {
     printf "%b\n" "${YELLOW}Installing Docker...${RC}"
     case "$PACKAGER" in
-        apt-get|nala)
+        apt-get | nala)
-            curl -fsSL https://get.docker.com | sh 
+            curl -fsSL https://get.docker.com | sh
             ;;
         dnf)
             "$ESCALATION_TOOL" "$PACKAGER" -y install dnf-plugins-core
@@ -52,7 +64,7 @@ install_docker() {
 install_docker_compose() {
     printf "%b\n" "${YELLOW}Installing Docker Compose...${RC}"
     case "$PACKAGER" in
-        apt-get|nala)
+        apt-get | nala)
             "$ESCALATION_TOOL" "$PACKAGER" install -y docker-compose-plugin
             ;;
         dnf)
@@ -74,7 +86,7 @@ install_docker_compose() {
 }
 
 install_components() {
-    choose_installation 
+    choose_installation
 
     if [ "$INSTALL_DOCKER" -eq 1 ]; then
         if ! command_exists docker; then
@@ -95,4 +107,4 @@ install_components() {
 
 checkEnv
 checkEscalationTool
-install_components
+install_components

core/tabs/applications-setup/dwmtitus-setup.sh

@@ -8,7 +8,7 @@ setupDWM() {
         pacman)
             "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm base-devel libx11 libxinerama libxft imlib2 libxcb git unzip flameshot lxappearance feh mate-polkit
             ;;
-        apt-get|nala)
+        apt-get | nala)
             "$ESCALATION_TOOL" "$PACKAGER" install -y build-essential libx11-dev libxinerama-dev libxft-dev libimlib2-dev libx11-xcb-dev libfontconfig1 libx11-6 libxft2 libxinerama1 libxcb-res0-dev git unzip flameshot lxappearance feh mate-polkit
             ;;
         dnf)
@@ -25,7 +25,7 @@ setupDWM() {
 makeDWM() {
     cd "$HOME" && git clone https://github.com/ChrisTitusTech/dwm-titus.git # CD to Home directory to install dwm-titus
     # This path can be changed (e.g. to linux-toolbox directory)
-    cd dwm-titus/ # Hardcoded path, maybe not the best.
+    cd dwm-titus/                         # Hardcoded path, maybe not the best.
     "$ESCALATION_TOOL" make clean install # Run make clean install
 }
 
@@ -105,7 +105,10 @@ picom_animations() {
         printf "%b\n" "${GREEN}Repository already exists, skipping clone${RC}"
     fi
 
-    cd "$HOME/.local/share/ftlabs-picom" || { printf "%b\n" "${RED}Failed to change directory to picom${RC}"; return 1; }
+    cd "$HOME/.local/share/ftlabs-picom" || {
+        printf "%b\n" "${RED}Failed to change directory to picom${RC}"
+        return 1
+    }
 
     # Build the project
     if ! meson setup --buildtype=release build; then
@@ -172,7 +175,7 @@ configure_backgrounds() {
         # Rename the cloned directory to 'backgrounds'
         mv "$PIC_DIR/nord-background" "$PIC_DIR/backgrounds"
         # Print a success message indicating that the backgrounds have been downloaded
-        printf "%b\n" "${GREEN}Downloaded desktop backgrounds to $BG_DIR${RC}"    
+        printf "%b\n" "${GREEN}Downloaded desktop backgrounds to $BG_DIR${RC}"
     else
         # If the backgrounds directory already exists, print a message indicating that the download is being skipped
         printf "%b\n" "${GREEN}Path $BG_DIR exists for desktop backgrounds, skipping download of backgrounds${RC}"
@@ -185,14 +188,14 @@ setupDisplayManager() {
         pacman)
             "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm xorg-xinit xorg-server
             ;;
-        apt-get|nala)
+        apt-get | nala)
             "$ESCALATION_TOOL" "$PACKAGER" install -y xorg xinit
             ;;
         dnf)
             "$ESCALATION_TOOL" "$PACKAGER" install -y xorg-x11-xinit xorg-x11-server-Xorg
             ;;
         *)
-            printf "%b\n" "${RED}Unsupported package manager: "$PACKAGER"${RC}"
+            printf "%b\n" "${RED}Unsupported package manager: ${PACKAGER}${RC}"
             exit 1
             ;;
     esac
@@ -207,41 +210,44 @@ setupDisplayManager() {
     done
     printf "%b\n" "${GREEN}Current display manager: $currentdm${RC}"
     if [ "$currentdm" = "none" ]; then
-        printf "%b\n" "${YELLOW}--------------------------${RC}" 
+        printf "%b\n" "${YELLOW}--------------------------${RC}"
-        printf "%b\n" "${YELLOW}Pick your Display Manager ${RC}" 
+        printf "%b\n" "${YELLOW}Pick your Display Manager ${RC}"
-        printf "%b\n" "${YELLOW}1. SDDM ${RC}" 
+        printf "%b\n" "${YELLOW}1. SDDM ${RC}"
-        printf "%b\n" "${YELLOW}2. LightDM ${RC}" 
+        printf "%b\n" "${YELLOW}2. LightDM ${RC}"
-        printf "%b\n" "${YELLOW}3. GDM ${RC}" 
+        printf "%b\n" "${YELLOW}3. GDM ${RC}"
-        printf "%b\n" "${YELLOW} ${RC}" 
+        printf "%b\n" "${YELLOW} ${RC}"
         printf "%b" "${YELLOW}Please select one: ${RC}"
         read -r DM
         case "$PACKAGER" in
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm "$DM"
                 ;;
-            apt-get|nala)
+            apt-get | nala)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y "$DM"
                 ;;
             dnf)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y "$DM"
                 ;;
             *)
-                printf "%b\n" "${RED}Unsupported package manager: "$PACKAGER"${RC}"
+                printf "%b\n" "${RED}Unsupported package manager: ${PACKAGER}${RC}"
                 exit 1
                 ;;
         esac
         printf "%b\n" "${GREEN}$DM installed successfully${RC}"
         systemctl enable "$DM"
-        
+
     fi
 }
 
 install_slstatus() {
     printf "Do you want to install slstatus? (y/N): " # using printf instead of 'echo' to avoid newline, -n flag for 'echo' is not supported in POSIX
-    read -r response # -r flag to prevent backslashes from being interpreted
+    read -r response                                  # -r flag to prevent backslashes from being interpreted
     if [ "$response" = "y" ] || [ "$response" = "Y" ]; then
         printf "%b\n" "${YELLOW}Installing slstatus${RC}"
-        cd "$HOME/dwm-titus/slstatus" || { printf "%b\n" "${RED}Failed to change directory to slstatus${RC}"; return 1; }
+        cd "$HOME/dwm-titus/slstatus" || {
+            printf "%b\n" "${RED}Failed to change directory to slstatus${RC}"
+            return 1
+        }
         if "$ESCALATION_TOOL" make clean install; then
             printf "%b\n" "${GREEN}slstatus installed successfully${RC}"
         else

core/tabs/applications-setup/fastfetch-setup.sh

@@ -9,7 +9,7 @@ installFastfetch() {
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm fastfetch
                 ;;
-            apt-get|nala)
+            apt-get | nala)
                 curl -sSLo /tmp/fastfetch.deb https://github.com/fastfetch-cli/fastfetch/releases/latest/download/fastfetch-linux-amd64.deb
                 "$ESCALATION_TOOL" "$PACKAGER" install -y /tmp/fastfetch.deb
                 rm /tmp/fastfetch.deb
@@ -35,4 +35,4 @@ setupFastfetchConfig() {
 checkEnv
 checkEscalationTool
 installFastfetch
-setupFastfetchConfig
+setupFastfetchConfig

core/tabs/applications-setup/grub-theme.sh

@@ -2,7 +2,7 @@
 
 . ../common-script.sh
 
-themeinstall(){
+themeinstall() {
     mkdir -p "$HOME/.local/share"
     cd "$HOME/.local/share"
     if [ -d 'Top-5-Bootloader-Themes' ]; then

core/tabs/applications-setup/kitty-setup.sh

@@ -31,4 +31,4 @@ setupKittyConfig() {
 checkEnv
 checkEscalationTool
 installKitty
-setupKittyConfig
+setupKittyConfig

core/tabs/applications-setup/linutil-installer.sh

@@ -2,6 +2,7 @@
 
 . ../common-script.sh
 
+#shellcheck disable=SC1091
 installLinutil() {
     printf "%b\n" "${YELLOW}Installing Linutil...${RC}"
     case "$PACKAGER" in
@@ -30,7 +31,7 @@ installLinutil() {
             printf "%b" "${YELLOW}Do you want to install the crates.io package? (y/N): ${RC}"
             read -r choice
             case $choice in
-                y|Y)
+                y | Y)
                     if ! command_exists cargo; then
                         printf "%b\n" "${YELLOW}Installing rustup...${RC}"
                         case "$PACKAGER" in
@@ -43,11 +44,11 @@ installLinutil() {
                             zypper)
                                 "$ESCALATION_TOOL" "$PACKAGER" install -n curl gcc make
                                 curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y
-                                . $HOME/.cargo/env
+                                . "$HOME/.cargo/env"
                                 ;;
                             *)
                                 curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y
-                                . $HOME/.cargo/env
+                                . "$HOME/.cargo/env"
                                 ;;
                         esac
                     fi
@@ -58,16 +59,17 @@ installLinutil() {
                     ;;
                 *) printf "%b\n" "${RED}Linutil not installed.${RC}" ;;
             esac
+            ;;
     esac
 }
 
 installExtra() {
     printf "%b\n" "${YELLOW}Installing the manpage...${RC}"
     "$ESCALATION_TOOL" mkdir -p /usr/share/man/man1
-    curl 'https://raw.githubusercontent.com/ChrisTitusTech/linutil/refs/heads/main/man/linutil.1' | "$ESCALATION_TOOL" tee '/usr/share/man/man1/linutil.1' > /dev/null
+    curl 'https://raw.githubusercontent.com/ChrisTitusTech/linutil/refs/heads/main/man/linutil.1' | "$ESCALATION_TOOL" tee '/usr/share/man/man1/linutil.1' >/dev/null
     printf "%b\n" "${YELLOW}Creating a Desktop Entry...${RC}"
     "$ESCALATION_TOOL" mkdir -p /usr/share/applications
-    curl 'https://raw.githubusercontent.com/ChrisTitusTech/linutil/refs/heads/main/linutil.desktop' | "$ESCALATION_TOOL" tee /usr/share/applications/linutil.desktop > /dev/null
+    curl 'https://raw.githubusercontent.com/ChrisTitusTech/linutil/refs/heads/main/linutil.desktop' | "$ESCALATION_TOOL" tee /usr/share/applications/linutil.desktop >/dev/null
     printf "%b\n" "${GREEN}Done.${RC}"
 }
 

core/tabs/applications-setup/linutil-updater.sh

@@ -2,6 +2,7 @@
 
 . ../common-script.sh
 
+#shellcheck disable=SC1091
 updateLinutil() {
     if [ ! -e "$HOME/.cargo/bin/linutil" ]; then
         printf "%b\n" "${RED}This script only updates the binary installed through cargo.\nlinutil_tui is not installed.${RC}"
@@ -10,19 +11,19 @@ updateLinutil() {
 
     if ! command_exists cargo; then
         printf "%b\n" "${YELLOW}Installing rustup...${RC}"
-            case "$PACKAGER" in
+        case "$PACKAGER" in
-                pacman)
+            pacman)
-                    "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm rustup
+                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm rustup
-                    ;;
+                ;;
-                zypper)
+            zypper)
-                    "$ESCALATION_TOOL" "$PACKAGER" install -n curl gcc make
+                "$ESCALATION_TOOL" "$PACKAGER" install -n curl gcc make
-                    curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
+                curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
-                    . $HOME/.cargo/env
+                . "$HOME/.cargo/env"
-                    ;;
+                ;;
-                *)
+            *)
-                    "$ESCALATION_TOOL" "$PACKAGER" install -y rustup
+                "$ESCALATION_TOOL" "$PACKAGER" install -y rustup
-                    ;;
+                ;;
-            esac
+        esac
     fi
 
     INSTALLED_VERSION=$(cargo install --list | grep "linutil_tui" | awk '{print $2}' | tr -d 'v:')

core/tabs/applications-setup/office-suites/freeoffice.sh

@@ -2,30 +2,30 @@
 
 . ../../common-script.sh
 
-installFreeOffice() {  
+installFreeOffice() {
     if ! command_exists softmaker-freeoffice-2024 freeoffice softmaker; then
         printf "%b\n" "${YELLOW}Installing Free Office...${RC}"
         case "$PACKAGER" in
-        apt-get|nala)
+            apt-get | nala)
-            curl -O https://www.softmaker.net/down/softmaker-freeoffice-2024_1218-01_amd64.deb
+                curl -O https://www.softmaker.net/down/softmaker-freeoffice-2024_1218-01_amd64.deb
-            "$ESCALATION_TOOL" "$PACKAGER" install -y ./softmaker-freeoffice-2024_1218-01_amd64.deb
+                "$ESCALATION_TOOL" "$PACKAGER" install -y ./softmaker-freeoffice-2024_1218-01_amd64.deb
-            ;;
+                ;;
-        zypper)
+            zypper)
-            "$ESCALATION_TOOL" "$PACKAGER" addrepo -f https://shop.softmaker.com/repo/rpm SoftMaker
+                "$ESCALATION_TOOL" "$PACKAGER" addrepo -f https://shop.softmaker.com/repo/rpm SoftMaker
-            "$ESCALATION_TOOL" "$PACKAGER" --gpg-auto-import-keys refresh
+                "$ESCALATION_TOOL" "$PACKAGER" --gpg-auto-import-keys refresh
-            "$ESCALATION_TOOL" "$PACKAGER" --non-interactive install softmaker-freeoffice-2024
+                "$ESCALATION_TOOL" "$PACKAGER" --non-interactive install softmaker-freeoffice-2024
-            ;;
+                ;;
-        pacman)
+            pacman)
-            "$AUR_HELPER" -S --needed --noconfirm freeoffice
+                "$AUR_HELPER" -S --needed --noconfirm freeoffice
-            ;;
+                ;;
-        dnf)
+            dnf)
-            "$ESCALATION_TOOL" curl -O -qO /etc/yum.repos.d/softmaker.repo https://shop.softmaker.com/repo/softmaker.repo
+                "$ESCALATION_TOOL" curl -O -qO /etc/yum.repos.d/softmaker.repo https://shop.softmaker.com/repo/softmaker.repo
-            "$ESCALATION_TOOL" "$PACKAGER" install -y softmaker-freeoffice-2024
+                "$ESCALATION_TOOL" "$PACKAGER" install -y softmaker-freeoffice-2024
-            ;;
+                ;;
-        *)
+            *)
-            printf "%b\n" "${RED}Unsupported package manager: ""$PACKAGER""${RC}"
+                printf "%b\n" "${RED}Unsupported package manager: ""$PACKAGER""${RC}"
-            exit 1
+                exit 1
-            ;;
+                ;;
         esac
     else
         printf "%b\n" "${GREEN}Free Office is already installed.${RC}"
@@ -35,4 +35,4 @@ installFreeOffice() {
 checkEnv
 checkEscalationTool
 checkAurHelper
-installFreeOffice
+installFreeOffice

core/tabs/applications-setup/office-suites/libreoffice.sh

@@ -6,10 +6,10 @@ installLibreOffice() {
     if ! command_exists org.libreoffice.LibreOffice && ! command_exists libreoffice; then
         printf "%b\n" "${YELLOW}Installing Libre Office...${RC}"
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y libreoffice-core
                 ;;
-            zypper|dnf)
+            zypper | dnf)
                 checkFlatpak
                 flatpak install -y flathub org.libreoffice.LibreOffice
                 ;;
@@ -28,4 +28,4 @@ installLibreOffice() {
 
 checkEnv
 checkEscalationTool
-installLibreOffice
+installLibreOffice

core/tabs/applications-setup/office-suites/onlyoffice.sh

@@ -6,11 +6,11 @@ installOnlyOffice() {
     if ! command_exists org.onlyoffice.desktopeditors && ! command_exists onlyoffice-desktopeditors; then
         printf "%b\n" "${YELLOW}Installing Only Office..${RC}."
         case "$PACKAGER" in
-            apt-get|nala)
+            apt-get | nala)
                 curl -O https://download.onlyoffice.com/install/desktop/editors/linux/onlyoffice-desktopeditors_amd64.deb
                 "$ESCALATION_TOOL" "$PACKAGER" install -y ./onlyoffice-desktopeditors_amd64.deb
                 ;;
-            zypper|dnf)
+            zypper | dnf)
                 checkFlatpak
                 flatpak install -y flathub org.onlyoffice.desktopeditors
                 ;;
@@ -30,4 +30,4 @@ installOnlyOffice() {
 checkEnv
 checkEscalationTool
 checkAurHelper
-installOnlyOffice
+installOnlyOffice

core/tabs/applications-setup/office-suites/wpsoffice.sh

@@ -22,4 +22,4 @@ installWpsOffice() {
 checkEnv
 checkEscalationTool
 checkAurHelper
-installWpsOffice
+installWpsOffice

core/tabs/applications-setup/pdf-suites/evince.sh

@@ -20,4 +20,4 @@ installEvince() {
 
 checkEnv
 checkEscalationTool
-installEvince
+installEvince

core/tabs/applications-setup/pdf-suites/okular.sh

@@ -20,4 +20,4 @@ installOkular() {
 
 checkEnv
 checkEscalationTool
-installOkular
+installOkular

core/tabs/applications-setup/rofi-setup.sh

@@ -4,7 +4,7 @@
 
 installRofi() {
     if ! command_exists rofi; then
-    printf "%b\n" "${YELLOW}Installing Rofi...${RC}"
+        printf "%b\n" "${YELLOW}Installing Rofi...${RC}"
         case "$PACKAGER" in
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm rofi

core/tabs/applications-setup/setup-flatpak.sh

@@ -40,4 +40,4 @@ installExtra() {
 checkEnv
 checkEscalationTool
 checkFlatpak
-installExtra
+installExtra

core/tabs/applications-setup/waydroid-setup.sh

@@ -3,7 +3,7 @@
 . ../common-script.sh
 
 checkGpu() {
-    if lspci | grep -i nvidia > /dev/null; then
+    if lspci | grep -i nvidia >/dev/null; then
         printf "%b\n" "${RED}Waydroid is not compatible with NVIDIA GPUs.${RC}"
         exit 1
     fi
@@ -11,7 +11,7 @@ checkGpu() {
 
 installWaydroid() {
     if ! command_exists waydroid; then
-    printf "%b\n" "${YELLOW}Installing Waydroid...${RC}"
+        printf "%b\n" "${YELLOW}Installing Waydroid...${RC}"
         case "$PACKAGER" in
             pacman)
                 "$AUR_HELPER" -S --needed --noconfirm waydroid
@@ -27,7 +27,7 @@ installWaydroid() {
                 "$AUR_HELPER" -S --needed --noconfirm binder_linux-dkms
                 "$ESCALATION_TOOL" modprobe binder-linux device=binder,hwbinder,vndbinder
                 ;;
-            apt-get|nala)
+            apt-get | nala)
                 curl https://repo.waydro.id | "$ESCALATION_TOOL" sh
                 "$ESCALATION_TOOL" "$PACKAGER" install -y waydroid
                 if command_exists dkms; then

core/tabs/applications-setup/zsh-setup.sh

@@ -4,33 +4,33 @@
 
 # Function to install zsh
 installZsh() {
-  if ! command_exists zsh; then
+    if ! command_exists zsh; then
-    printf "%b\n" "${YELLOW}Installing Zsh...${RC}"
+        printf "%b\n" "${YELLOW}Installing Zsh...${RC}"
-      case "$PACKAGER" in
+        case "$PACKAGER" in
-          pacman)
+            pacman)
-              "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm zsh
+                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm zsh
-              ;;
+                ;;
-          *)
+            *)
-              "$ESCALATION_TOOL" "$PACKAGER" install -y zsh
+                "$ESCALATION_TOOL" "$PACKAGER" install -y zsh
-              ;;
+                ;;
-      esac
+        esac
-  else
+    else
-      printf "%b\n" "${GREEN}ZSH is already installed.${RC}"
+        printf "%b\n" "${GREEN}ZSH is already installed.${RC}"
-  fi
+    fi
 }
 
 # Function to setup zsh configuration
 setupZshConfig() {
-  printf "%b\n" "${YELLOW}Setting up Zsh configuration...${RC}"
+    printf "%b\n" "${YELLOW}Setting up Zsh configuration...${RC}"
-  CONFIG_DIR="$HOME/.config/zsh"
+    CONFIG_DIR="$HOME/.config/zsh"
-  ZSHRC_FILE="$CONFIG_DIR/.zshrc"
+    ZSHRC_FILE="$CONFIG_DIR/.zshrc"
 
-  if [ ! -d "$CONFIG_DIR" ]; then
+    if [ ! -d "$CONFIG_DIR" ]; then
-    mkdir -p "$CONFIG_DIR"
+        mkdir -p "$CONFIG_DIR"
-  fi
+    fi
 
-  # Write the configuration to .zshrc
+    # Write the configuration to .zshrc
-  cat <<EOL >"$ZSHRC_FILE"
+    cat <<EOL >"$ZSHRC_FILE"
 HISTFILE=~/.config/zsh/.histfile
 HISTSIZE=5000
 SAVEHIST=100000
@@ -43,9 +43,9 @@ PROMPT='%F{32}%n%f%F{166}@%f%F{64}%m:%F{166}%~%f%F{15}$%f '
 RPROMPT='%F{15}(%F{166}%D{%H:%M}%F{15})%f'
 EOL
 
-  # Ensure /etc/zsh/zshenv sets ZDOTDIR to the user's config directory
+    # Ensure /etc/zsh/zshenv sets ZDOTDIR to the user's config directory
-  [ ! -f /etc/zsh/zshenv ] && "$ESCALATION_TOOL" mkdir -p /etc/zsh && "$ESCALATION_TOOL" touch /etc/zsh/zshenv
+    [ ! -f /etc/zsh/zshenv ] && "$ESCALATION_TOOL" mkdir -p /etc/zsh && "$ESCALATION_TOOL" touch /etc/zsh/zshenv
-  echo "export ZDOTDIR=\"$HOME/.config/zsh\"" | "$ESCALATION_TOOL" tee -a /etc/zsh/zshenv
+    echo "export ZDOTDIR=\"$HOME/.config/zsh\"" | "$ESCALATION_TOOL" tee -a /etc/zsh/zshenv
 }
 
 checkEnv

core/tabs/common-script.sh

@@ -9,11 +9,11 @@ CYAN='\033[36m'
 GREEN='\033[32m'
 
 command_exists() {
-for cmd in "$@"; do
+    for cmd in "$@"; do
-    export PATH=/home/jeeva/.local/share/flatpak/exports/bin:/var/lib/flatpak/exports/bin:$PATH
+        export PATH="/home/jeeva/.local/share/flatpak/exports/bin:/var/lib/flatpak/exports/bin:$PATH"
-    command -v "$cmd" >/dev/null 2>&1 || return 1
+        command -v "$cmd" >/dev/null 2>&1 || return 1
-done
+    done
-return 0
+    return 0
 }
 
 checkFlatpak() {
@@ -157,9 +157,10 @@ checkCurrentDirectoryWritable() {
 }
 
 checkDistro() {
-    DTYPE="unknown"  # Default to unknown
+    DTYPE="unknown" # Default to unknown
     # Use /etc/os-release for modern distro identification
     if [ -f /etc/os-release ]; then
+        # shellcheck disable=SC1091
         . /etc/os-release
         DTYPE=$ID
     fi

core/tabs/gaming/diablo-ii/d2r-loot-filters.sh

@@ -41,7 +41,7 @@ print_menu() {
     if [ $start -lt 0 ]; then start=0; fi
     if [ $((start + max_display)) -gt $total ]; then start=$((total - max_display)); fi
     if [ $start -lt 0 ]; then start=0; fi
-    
+
     printf "%b\n" "Please select the Diablo II: Resurrected installation path:"
     i=0
     echo "$paths_string" | tr '|' '\n' | while IFS= read -r path; do
@@ -129,4 +129,4 @@ printf "%b\n" "3. Click the gear icon next to the 'Play' button"
 printf "%b\n" "4. Select 'Game Settings'"
 printf "%b\n" "5. In the 'Additional command line arguments' field, enter: -mod lootfilter -txt"
 printf "%b\n" "6. Click 'Done' to save the changes"
-printf "%b\n" "After completing these steps, launch Diablo II: Resurrected through Battle.net to use the loot filter."
+printf "%b\n" "After completing these steps, launch Diablo II: Resurrected through Battle.net to use the loot filter."

core/tabs/security/firewall-baselines.sh

@@ -4,7 +4,7 @@
 
 installPkg() {
     if ! command_exists ufw; then
-     printf "%b\n" "${YELLOW}Installing UFW...${RC}"
+        printf "%b\n" "${YELLOW}Installing UFW...${RC}"
         case "$PACKAGER" in
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm ufw

core/tabs/system-setup/arch/server-setup.sh

@@ -86,7 +86,7 @@ select_option() {
             fi
         done
 
-        last_selected=$selected
+        last_selected="$selected"
 
         # Read user input
         read -rsn1 key
@@ -96,13 +96,13 @@ select_option() {
                 case $key in
                     '[A') # Up arrow
                         ((selected--))
-                        if [ $selected -lt 0 ]; then
+                        if [ "$selected" -lt 0 ]; then
                             selected=$((num_options - 1))
                         fi
                         ;;
                     '[B') # Down arrow
                         ((selected++))
-                        if [ $selected -ge $num_options ]; then
+                        if [ "$selected" -ge "$num_options" ]; then
                             selected=0
                         fi
                         ;;
@@ -119,9 +119,9 @@ select_option() {
 
 # @description Displays ArchTitus logo
 # @noargs
-logo () {
+logo() {
-# This will be shown on every set as user is progressing
+    # This will be shown on every set as user is progressing
-echo -ne "
+    echo -ne "
 -------------------------------------------------------------------------
  █████╗ ██████╗  ██████╗██╗  ██╗████████╗██╗████████╗██╗   ██╗███████╗
 ██╔══██╗██╔══██╗██╔════╝██║  ██║╚══██╔══╝██║╚══██╔══╝██║   ██║██╔════╝
@@ -136,7 +136,7 @@ echo -ne "
 }
 # @description This function will handle file systems. At this movement we are handling only
 # btrfs and ext4. Others will be added in future.
-filesystem () {
+filesystem() {
     echo -ne "
     Please Select your file system for both boot and root
     "
@@ -144,19 +144,22 @@ filesystem () {
     select_option "${options[@]}"
 
     case $? in
-    0) export FS=btrfs;;
+        0) export FS=btrfs ;;
-    1) export FS=ext4;;
+        1) export FS=ext4 ;;
-    2)
+        2)
-        set_password "LUKS_PASSWORD"
+            set_password "LUKS_PASSWORD"
-        export FS=luks
+            export FS=luks
-        ;;
+            ;;
-    3) exit ;;
+        3) exit ;;
-    *) echo "Wrong option please select again"; filesystem;;
+        *)
+            echo "Wrong option please select again"
+            filesystem
+            ;;
     esac
 }
 
 # @description Detects and sets timezone.
-timezone () {
+timezone() {
     # Added this from arch wiki https://wiki.archlinux.org/title/System_time
     time_zone="$(curl --fail https://ipapi.co/timezone)"
     echo -ne "
@@ -167,23 +170,28 @@ timezone () {
     select_option "${options[@]}"
 
     case ${options[$?]} in
-        y|Y|yes|Yes|YES)
+        y | Y | yes | Yes | YES)
-        echo "${time_zone} set as timezone"
+            echo "${time_zone} set as timezone"
-        export TIMEZONE=$time_zone;;
+            export TIMEZONE=$time_zone
-        n|N|no|NO|No)
+            ;;
-        echo "Please enter your desired timezone e.g. Europe/London :"
+        n | N | no | NO | No)
-        read -r new_timezone
+            echo "Please enter your desired timezone e.g. Europe/London :"
-        echo "${new_timezone} set as timezone"
+            read -r new_timezone
-        export TIMEZONE=$new_timezone;;
+            echo "${new_timezone} set as timezone"
-        *) echo "Wrong option. Try again";timezone;;
+            export TIMEZONE=$new_timezone
+            ;;
+        *)
+            echo "Wrong option. Try again"
+            timezone
+            ;;
     esac
 }
 # @description Set user's keyboard mapping.
-keymap () {
+keymap() {
     echo -ne "
     Please select key board layout from this list"
     # These are default key maps as presented in official arch repo archinstall
-    options=(us by ca cf cz de dk es et fa fi fr gr hu il it lt lv mk nl no pl ro ru se sg ua uk)
+    options=('us' 'by' 'ca' 'cf' 'cz' 'de' 'dk' 'es' 'et' 'fa' 'fi' 'fr' 'gr' 'hu' 'il' 'it' 'lt' 'lv' 'mk' 'nl' 'no' 'pl' 'ro' 'ru' 'se' 'sg' 'ua' 'uk')
 
     select_option "${options[@]}"
     keymap=${options[$?]}
@@ -193,7 +201,7 @@ keymap () {
 }
 
 # @description Choose whether drive is SSD or not.
-drivessd () {
+drivessd() {
     echo -ne "
     Is this an ssd? yes/no:
     "
@@ -202,17 +210,22 @@ drivessd () {
     select_option "${options[@]}"
 
     case ${options[$?]} in
-        y|Y|yes|Yes|YES)
+        y | Y | yes | Yes | YES)
-        export MOUNT_OPTIONS="noatime,compress=zstd,ssd,commit=120";;
+            export MOUNT_OPTIONS="noatime,compress=zstd,ssd,commit=120"
-        n|N|no|NO|No)
+            ;;
-        export MOUNT_OPTIONS="noatime,compress=zstd,commit=120";;
+        n | N | no | NO | No)
-        *) echo "Wrong option. Try again";drivessd;;
+            export MOUNT_OPTIONS="noatime,compress=zstd,commit=120"
+            ;;
+        *)
+            echo "Wrong option. Try again"
+            drivessd
+            ;;
     esac
 }
 
 # @description Disk selection for drive to be used with installation.
-diskpart () {
+diskpart() {
-echo -ne "
+    echo -ne "
 ------------------------------------------------------------------------
     THIS WILL FORMAT AND DELETE ALL DATA ON THE DISK
     Please make sure you know what you are doing because
@@ -225,33 +238,31 @@ echo -ne "
 
     PS3='
     Select the disk to install on: '
+    # shellcheck disable=SC2207
     options=($(lsblk -n --output TYPE,KNAME,SIZE | awk '$1=="disk"{print "/dev/"$2"|"$3}'))
 
     select_option "${options[@]}"
     disk=${options[$?]%|*}
 
     echo -e "\n${disk%|*} selected \n"
-        export DISK=${disk%|*}
+    export DISK=${disk%|*}
 
     drivessd
 }
 
 # @description Gather username and password to be used for installation.
-userinfo () {
+userinfo() {
     # Loop through user input until the user gives a valid username
-    while true
+    while true; do
-    do
+        read -r -p "Please enter username: " username
-            read -r -p "Please enter username: " username
+        if [[ "${username,,}" =~ ^[a-z_]([a-z0-9_-]{0,31}|[a-z0-9_-]{0,30}\$)$ ]]; then
-            if [[ "${username,,}" =~ ^[a-z_]([a-z0-9_-]{0,31}|[a-z0-9_-]{0,30}\$)$ ]]
+            break
-            then
+        fi
-                    break
+        echo "Incorrect username."
-            fi
-            echo "Incorrect username."
     done
     export USERNAME=$username
 
-    while true
+    while true; do
-    do
         read -rs -p "Please enter password: " PASSWORD1
         echo -ne "\n"
         read -rs -p "Please re-enter password: " PASSWORD2
@@ -264,21 +275,18 @@ userinfo () {
     done
     export PASSWORD=$PASSWORD1
 
-     # Loop through user input until the user gives a valid hostname, but allow the user to force save
+    # Loop through user input until the user gives a valid hostname, but allow the user to force save
-    while true
+    while true; do
-    do
+        read -r -p "Please name your machine: " name_of_machine
-            read -r -p "Please name your machine: " name_of_machine
+        # hostname regex (!!couldn't find spec for computer name!!)
-            # hostname regex (!!couldn't find spec for computer name!!)
+        if [[ "${name_of_machine,,}" =~ ^[a-z][a-z0-9_.-]{0,62}[a-z0-9]$ ]]; then
-            if [[ "${name_of_machine,,}" =~ ^[a-z][a-z0-9_.-]{0,62}[a-z0-9]$ ]]
+            break
-            then
+        fi
-                    break
+        # if validation fails allow the user to force saving of the hostname
-            fi
+        read -r -p "Hostname doesn't seem correct. Do you still want to save it? (y/n)" force
-            # if validation fails allow the user to force saving of the hostname
+        if [[ "${force,,}" = "y" ]]; then
-            read -r -p "Hostname doesn't seem correct. Do you still want to save it? (y/n)" force
+            break
-            if [[ "${force,,}" = "y" ]]
+        fi
-            then
-                    break
-            fi
     done
     export NAME_OF_MACHINE=$name_of_machine
 }
@@ -333,14 +341,14 @@ echo -ne "
 "
 umount -A --recursive /mnt # make sure everything is unmounted before we start
 # disk prep
-sgdisk -Z "${DISK}" # zap all on disk
+sgdisk -Z "${DISK}"         # zap all on disk
 sgdisk -a 2048 -o "${DISK}" # new gpt disk 2048 alignment
 
 # create partitions
-sgdisk -n 1::+1M --typecode=1:ef02 --change-name=1:'BIOSBOOT' "${DISK}" # partition 1 (BIOS Boot Partition)
+sgdisk -n 1::+1M --typecode=1:ef02 --change-name=1:'BIOSBOOT' "${DISK}"  # partition 1 (BIOS Boot Partition)
 sgdisk -n 2::+1GiB --typecode=2:ef00 --change-name=2:'EFIBOOT' "${DISK}" # partition 2 (UEFI Boot Partition)
-sgdisk -n 3::-0 --typecode=3:8300 --change-name=3:'ROOT' "${DISK}" # partition 3 (Root), default start, remaining
+sgdisk -n 3::-0 --typecode=3:8300 --change-name=3:'ROOT' "${DISK}"       # partition 3 (Root), default start, remaining
-if [[ ! -d "/sys/firmware/efi" ]]; then # Checking for bios system
+if [[ ! -d "/sys/firmware/efi" ]]; then                                  # Checking for bios system
     sgdisk -A 1:set:2 "${DISK}"
 fi
 partprobe "${DISK}" # reread partition table to ensure it is correct
@@ -352,27 +360,27 @@ echo -ne "
 -------------------------------------------------------------------------
 "
 # @description Creates the btrfs subvolumes.
-createsubvolumes () {
+createsubvolumes() {
     btrfs subvolume create /mnt/@
     btrfs subvolume create /mnt/@home
 }
 
 # @description Mount all btrfs subvolumes after root has been mounted.
-mountallsubvol () {
+mountallsubvol() {
     mount -o "${MOUNT_OPTIONS}",subvol=@home "${partition3}" /mnt/home
 }
 
 # @description BTRFS subvolulme creation and mounting.
-subvolumesetup () {
+subvolumesetup() {
-# create nonroot subvolumes
+    # create nonroot subvolumes
     createsubvolumes
-# unmount root to remount with subvolume
+    # unmount root to remount with subvolume
     umount /mnt
-# mount @ subvolume
+    # mount @ subvolume
     mount -o "${MOUNT_OPTIONS}",subvol=@ "${partition3}" /mnt
-# make directories home, .snapshots, var, tmp
+    # make directories home, .snapshots, var, tmp
     mkdir -p /mnt/home
-# mount subvolumes
+    # mount subvolumes
     mountallsubvol
 }
 
@@ -395,13 +403,13 @@ elif [[ "${FS}" == "ext4" ]]; then
     mount -t ext4 "${partition3}" /mnt
 elif [[ "${FS}" == "luks" ]]; then
     mkfs.vfat -F32 "${partition2}"
-# enter luks password to cryptsetup and format root partition
+    # enter luks password to cryptsetup and format root partition
     echo -n "${LUKS_PASSWORD}" | cryptsetup -y -v luksFormat "${partition3}" -
-# open luks container and ROOT will be place holder
+    # open luks container and ROOT will be place holder
     echo -n "${LUKS_PASSWORD}" | cryptsetup open "${partition3}" ROOT -
-# now format that container
+    # now format that container
     mkfs.btrfs "${partition3}"
-# create subvolumes for btrfs
+    # create subvolumes for btrfs
     mount -t btrfs "${partition3}" /mnt
     subvolumesetup
     ENCRYPTED_PARTITION_UUID=$(blkid -s UUID -o value "${partition3}")
@@ -435,10 +443,10 @@ if [[ ! -d "/sys/firmware/efi" ]]; then
 else
     pacstrap /mnt base base-devel linux-lts linux-firmware efibootmgr --noconfirm --needed
 fi
-echo "keyserver hkp://keyserver.ubuntu.com" >> /mnt/etc/pacman.d/gnupg/gpg.conf
+echo "keyserver hkp://keyserver.ubuntu.com" >>/mnt/etc/pacman.d/gnupg/gpg.conf
 cp /etc/pacman.d/mirrorlist /mnt/etc/pacman.d/mirrorlist
 
-genfstab -U /mnt >> /mnt/etc/fstab
+genfstab -U /mnt >>/mnt/etc/fstab
 echo "
   Generated /etc/fstab:
 "
@@ -456,8 +464,8 @@ echo -ne "
                     Checking for low memory systems <8G
 -------------------------------------------------------------------------
 "
-TOTAL_MEM=$(cat /proc/meminfo | grep -i 'memtotal' | grep -o '[[:digit:]]*')
+TOTAL_MEM=$(grep -i 'memtotal' /proc/meminfo | grep -o '[[:digit:]]*')
-if [[  $TOTAL_MEM -lt 8000000 ]]; then
+if [[ $TOTAL_MEM -lt 8000000 ]]; then
     # Put swap into the actual system, not into RAM disk, otherwise there is no point in it, it'll cache RAM into RAM. So, /mnt/ everything.
     mkdir -p /mnt/opt/swap # make a dir that we can apply NOCOW to to make it btrfs-friendly.
     if findmnt -n -o FSTYPE /mnt | grep -q btrfs; then
@@ -469,11 +477,12 @@ if [[  $TOTAL_MEM -lt 8000000 ]]; then
     mkswap /mnt/opt/swap/swapfile
     swapon /mnt/opt/swap/swapfile
     # The line below is written to /mnt/ but doesn't contain /mnt/, since it's just / for the system itself.
-    echo "/opt/swap/swapfile    none    swap    sw    0    0" >> /mnt/etc/fstab # Add swap to fstab, so it KEEPS working after installation.
+    echo "/opt/swap/swapfile    none    swap    sw    0    0" >>/mnt/etc/fstab # Add swap to fstab, so it KEEPS working after installation.
 fi
 
 gpu_type=$(lspci | grep -E "VGA|3D|Display")
 
+# shellcheck disable=SC2154
 arch-chroot /mnt /bin/bash -c "KEYMAP='${KEYMAP}' /bin/bash" <<EOF
 
 echo -ne "
@@ -500,7 +509,7 @@ echo -ne "
                 changing the compression settings.
 -------------------------------------------------------------------------
 "
-TOTAL_MEM=$(cat /proc/meminfo | grep -i 'memtotal' | grep -o '[[:digit:]]*')
+TOTAL_MEM=$(grep -i 'memtotal' /proc/meminfo | grep -o '[[:digit:]]*')
 if [[  $TOTAL_MEM -gt 8000000 ]]; then
 sed -i "s/#MAKEFLAGS=\"-j2\"/MAKEFLAGS=\"-j$nc\"/g" /etc/makepkg.conf
 sed -i "s/COMPRESSXZ=(xz -c -z -)/COMPRESSXZ=(xz -c -T $nc -z -)/g" /etc/makepkg.conf

core/tabs/system-setup/compile-setup.sh

@@ -2,8 +2,8 @@
 
 . ../common-script.sh
 
+# shellcheck disable=SC2086
 installDepend() {
-    ## Check for dependencies.
     DEPENDENCIES='tar tree multitail tldr trash-cli unzip cmake make jq'
     printf "%b\n" "${YELLOW}Installing dependencies...${RC}"
     case "$PACKAGER" in
@@ -17,7 +17,7 @@ installDepend() {
             fi
             "$AUR_HELPER" -S --needed --noconfirm $DEPENDENCIES
             ;;
-        apt-get|nala)
+        apt-get | nala)
             COMPILEDEPS='build-essential'
             "$ESCALATION_TOOL" "$PACKAGER" update
             "$ESCALATION_TOOL" dpkg --add-architecture i386
@@ -33,7 +33,7 @@ installDepend() {
             ;;
         zypper)
             COMPILEDEPS='patterns-devel-base-devel_basis'
-            "$ESCALATION_TOOL" "$PACKAGER" refresh 
+            "$ESCALATION_TOOL" "$PACKAGER" refresh
             "$ESCALATION_TOOL" "$PACKAGER" --non-interactive install $DEPENDENCIES $COMPILEDEPS
             "$ESCALATION_TOOL" "$PACKAGER" --non-interactive install libgcc_s1-gcc7-32bit glibc-devel-32bit
             ;;
@@ -46,4 +46,4 @@ installDepend() {
 checkEnv
 checkAURHelper
 checkEscalationTool
-installDepend
+installDepend

core/tabs/system-setup/fedora/configure-dnf.sh

@@ -6,9 +6,9 @@ configureDNF() {
     case "$PACKAGER" in
         dnf)
             printf "%b\n" "${YELLOW}Configuring  DNF...${RC}"
-            "$ESCALATION_TOOL" sed -i '/^max_parallel_downloads=/c\max_parallel_downloads=10' /etc/dnf/dnf.conf || echo 'max_parallel_downloads=10' >> /etc/dnf/dnf.conf
+            "$ESCALATION_TOOL" sed -i '/^max_parallel_downloads=/c\max_parallel_downloads=10' /etc/dnf/dnf.conf || echo 'max_parallel_downloads=10' >>/etc/dnf/dnf.conf
-            echo "fastestmirror=True" | "$ESCALATION_TOOL" tee -a /etc/dnf/dnf.conf > /dev/null
+            echo "fastestmirror=True" | "$ESCALATION_TOOL" tee -a /etc/dnf/dnf.conf >/dev/null
-            echo "defaultyes=True" | "$ESCALATION_TOOL" tee -a /etc/dnf/dnf.conf > /dev/null            
+            echo "defaultyes=True" | "$ESCALATION_TOOL" tee -a /etc/dnf/dnf.conf >/dev/null
             "$ESCALATION_TOOL" "$PACKAGER" -y install dnf-plugins-core
             printf "%b\n" "${GREEN}DNF Configured Successfully.${RC}"
             ;;

core/tabs/system-setup/fedora/fedora-upgrade.sh

@@ -9,20 +9,20 @@ update() {
     printf "%b\n" "${YELLOW}Make sure your system is fully updated; if not, update it first and reboot once.${RC}"
     printf "%b\n" "${CYAN}Your current Fedora version is $current_version.${RC}"
     printf "%b\n" "${CYAN}The next available version is $next_version.${RC}"
-    
+
-    printf "%b\n" "${YELLOW}Do you want to update to $next_version? (y/n): ${RC}"  
+    printf "%b\n" "${YELLOW}Do you want to update to $next_version? (y/n): ${RC}"
     read -r response
-    
+
     case "$response" in
-        y|Y)
+        y | Y)
             printf "%b\n" "${CYAN}Preparing to update to $next_version...${RC}"
-        
+
             if ! "$ESCALATION_TOOL" "$PACKAGER" install dnf-plugin-system-upgrade -y; then
                 printf "%b\n" "${RED}Failed to install dnf-plugin-system-upgrade.${RC}"
                 exit 1
             fi
-        
+
-            if ! "$ESCALATION_TOOL" "$PACKAGER" system-upgrade download --releasever="$next_version" -y ; then
+            if ! "$ESCALATION_TOOL" "$PACKAGER" system-upgrade download --releasever="$next_version" -y; then
                 printf "%b\n" "${RED}Failed to download the upgrade packages.${RC}"
                 exit 1
             fi
@@ -31,7 +31,7 @@ update() {
             read -r reboot_response
 
             case "$reboot_response" in
-                y|Y)
+                y | Y)
                     printf "%b\n" "${YELLOW}Rebooting to apply the upgrade...${RC}"
                     "$ESCALATION_TOOL" "$PACKAGER" system-upgrade reboot
                     ;;
@@ -48,10 +48,10 @@ update() {
 
 post_upgrade() {
     printf "%b\n" "${YELLOW}Running post-upgrade tasks...${RC}"
-    
+
     case "$PACKAGER" in
         dnf)
-            "$ESCALATION_TOOL" "$PACKAGER" autoremove  
+            "$ESCALATION_TOOL" "$PACKAGER" autoremove
             "$ESCALATION_TOOL" "$PACKAGER" distro-sync -y
             ;;
         *)

core/tabs/system-setup/fedora/multimedia-codecs.sh

@@ -23,4 +23,4 @@ multimedia() {
 
 checkEnv
 checkEscalationTool
-multimedia
+multimedia

core/tabs/system-setup/fedora/nvidia-proprietary-driver-setup.sh

@@ -1,6 +1,7 @@
 #!/bin/sh -e
 
 . ../../common-script.sh
+
 # This script allows user to download proprietary drivers for nvidia in fedora
 
 # It also disables nouveau nvidia drivers
@@ -10,84 +11,78 @@
 # NOTE: Currently script only provides drivers for gpu 2014 and above (510+ and above)
 
 checkRepo() {
-  REPO_ID="rpmfusion-nonfree-nvidia-driver"
+    REPO_ID="rpmfusion-nonfree-nvidia-driver"
 
-  if [ "$(dnf repolist enabled 2>/dev/null | grep -c "$REPO_ID")" -gt 0 ]; then
-    printf "%b\n" "${GREEN}Nvidia non-free repository is already enabled.${RC}"
-  else
-    printf "%b\n" "${YELLOW}Nvidia non-free repository is not enabled. Enabling now...${RC}"
-
-    # Enable the repository
-    "$ESCALATION_TOOL" dnf config-manager --set-enabled "$REPO_ID"
-
-    # Refreshing repository list
-    "$ESCALATION_TOOL" dnf makecache
-
-    # Verify if the repository is enabled
     if [ "$(dnf repolist enabled 2>/dev/null | grep -c "$REPO_ID")" -gt 0 ]; then
-      printf "%b\n" "${GREEN}Nvidia non-free repository is now enabled...${RC}"
+        printf "%b\n" "${GREEN}Nvidia non-free repository is already enabled.${RC}"
     else
-      printf "%b\n" "${RED}Failed to enable nvidia non-free repository...${RC}"
+        printf "%b\n" "${YELLOW}Nvidia non-free repository is not enabled. Enabling now...${RC}"
-      exit 1
+
+        "$ESCALATION_TOOL" dnf config-manager --set-enabled "$REPO_ID"
+        "$ESCALATION_TOOL" dnf makecache
+
+        if [ "$(dnf repolist enabled 2>/dev/null | grep -c "$REPO_ID")" -gt 0 ]; then
+            printf "%b\n" "${GREEN}Nvidia non-free repository is now enabled...${RC}"
+        else
+            printf "%b\n" "${RED}Failed to enable nvidia non-free repository...${RC}"
+            exit 1
+        fi
     fi
-  fi
 }
 
 checkDriverInstallation() {
-  if modinfo -F version nvidia >/dev/null 2>&1; then
+    if modinfo -F version nvidia >/dev/null 2>&1; then
-    return 0
+        return 0
-  else
+    else
-    return 1
+        return 1
-  fi
+    fi
 }
 
 installDriver() {
 
-  if checkDriverInstallation; then
-    printf "%b\n" "${GREEN}NVIDIA driver is already installed.${RC}"
-    exit 0
-  fi
-
-  # NOTE:: Installing graphics driver.
-  "$ESCALATION_TOOL" dnf install akmod-nvidia xorg-x11-drv-nvidia-cuda -y
-  printf "%b\n" "${YELLOW}Building the drivers may take upto 5 minutes. Please don't kill the script!\n If the build failed try running the script again, select \"Remove Nvidia Drivers\" and reboot the system, then try installing drivers again.${RC}"
-
-  for i in $(seq 1 5); do
     if checkDriverInstallation; then
-      printf "%b\n" "${GREEN}Driver installed successfully.${RC}"
+        printf "%b\n" "${GREEN}NVIDIA driver is already installed.${RC}"
-      printf "%b\n" "${GREEN}Installed driver version $(modinfo -F version nvidia)${RC}"
+        exit 0
-      break
     fi
-    printf "%b\n" "${YELLOW}Waiting for driver to be built..."
-    sleep 1m
-  done
 
-  printf "%b\n" "${GREEN}Now you can reboot the system.${RC}"
+    "$ESCALATION_TOOL" dnf install akmod-nvidia xorg-x11-drv-nvidia-cuda -y
+    printf "%b\n" "${YELLOW}Building the drivers may take upto 5 minutes. Please don't kill the script!\n If the build failed try running the script again, select \"Remove Nvidia Drivers\" and reboot the system, then try installing drivers again.${RC}"
+
+    for _ in $(seq 1 5); do
+        if checkDriverInstallation; then
+            printf "%b\n" "${GREEN}Driver installed successfully.${RC}"
+            printf "%b\n" "${GREEN}Installed driver version $(modinfo -F version nvidia)${RC}"
+            break
+        fi
+        printf "%b\n" "${YELLOW}Waiting for driver to be built..."
+        sleep 1m
+    done
+
+    printf "%b\n" "${GREEN}Now you can reboot the system.${RC}"
 
 }
 
-# NOTE: A confirmation option to proceed or not
 userConfirmation() {
-  printf "%b" "${YELLOW}Do you want to continue? (y/N): ${RC}"
+    printf "%b" "${YELLOW}Do you want to continue? (y/N): ${RC}"
-  read -r choice
+    read -r choice
-  case "$choice" in
+    case "$choice" in
-  y | Y)
+        y | Y)
-    checkRepo
+            checkRepo
-    installDriver
+            installDriver
-    return
+            return
-    ;;
+            ;;
-  n | N)
+        n | N)
-    printf "%b\n" "${RED} Exiting the Script ${RC}"
+            printf "%b\n" "${RED}Exiting the script.${RC}"
-    return
+            return
-    ;;
+            ;;
-  *)
+        *)
-    printf "%b\n" "${RED} Invalid Option! ${RC}"
+            printf "%b\n" "${RED}Invalid Option!${RC}"
-    userConfirmation
+            userConfirmation
-    ;;
+            ;;
-  esac
+    esac
 }
 
-printf "%b\n" "${YELLOW}Warning! This script will enable Nvidia non-free repository and only install drivers for GPUs from 2014 or later. It works on fedora 34 and above.\n It is recommended remove this driver while updating your kernel packages to newer version.${RC}"
+printf "%b\n" "${YELLOW}Warning! This script will enable nvidia non-free repository and only install drivers for GPUs from 2014 or later. It works on fedora 34 and above.\n It is recommended remove this driver while updating your kernel packages to newer version.${RC}"
 
 checkEnv
 checkEscalationTool

core/tabs/system-setup/fedora/rpm-fusion-setup.sh

@@ -26,4 +26,4 @@ installRPMFusion() {
 
 checkEnv
 checkEscalationTool
-installRPMFusion
+installRPMFusion

core/tabs/system-setup/fedora/virtualization.sh

@@ -7,7 +7,7 @@ configureVirtualization() {
     case "$PACKAGER" in
         dnf)
             printf "%b\n" "${YELLOW}Installing virtualization tools...${RC}"
-            "$ESCALATION_TOOL" "$PACKAGER" install -y @virtualization 
+            "$ESCALATION_TOOL" "$PACKAGER" install -y @virtualization
             printf "%b\n" "${GREEN}Installed virtualization tools...${RC}"
             ;;
         *)

core/tabs/system-setup/gaming-setup.sh

@@ -1,14 +1,14 @@
 #!/bin/sh -e
 
+# shellcheck disable=SC2086
+
 . ../common-script.sh
 
 installDepend() {
-    # Check for dependencies
     DEPENDENCIES='wine dbus'
     printf "%b\n" "${YELLOW}Installing dependencies...${RC}"
     case "$PACKAGER" in
         pacman)
-            #Check for multilib
             if ! grep -q "^\s*\[multilib\]" /etc/pacman.conf; then
                 echo "[multilib]" | "$ESCALATION_TOOL" tee -a /etc/pacman.conf
                 echo "Include = /etc/pacman.d/mirrorlist" | "$ESCALATION_TOOL" tee -a /etc/pacman.conf
@@ -25,7 +25,7 @@ installDepend() {
 
             $AUR_HELPER -S --needed --noconfirm $DEPENDENCIES $DISTRO_DEPS
             ;;
-        apt-get|nala)
+        apt-get | nala)
             DISTRO_DEPS="libasound2 libsdl2 wine64 wine32"
 
             "$ESCALATION_TOOL" "$PACKAGER" update
@@ -36,7 +36,7 @@ installDepend() {
             "$ESCALATION_TOOL" "$PACKAGER" install -y $DEPENDENCIES $DISTRO_DEPS
             ;;
         dnf)
-            if [ "$(rpm -E %fedora)" -le 41 ]; then 
+            if [ "$(rpm -E %fedora)" -le 41 ]; then
                 "$ESCALATION_TOOL" "$PACKAGER" install ffmpeg ffmpeg-libs -y
                 "$ESCALATION_TOOL" "$PACKAGER" install -y $DEPENDENCIES
             else
@@ -61,7 +61,7 @@ installAdditionalDepend() {
             DISTRO_DEPS='steam lutris goverlay'
             "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm $DISTRO_DEPS
             ;;
-        apt-get|nala)
+        apt-get | nala)
             version=$(git -c 'versionsort.suffix=-' ls-remote --tags --sort='v:refname' https://github.com/lutris/lutris |
                 grep -v 'beta' |
                 tail -n1 |
@@ -69,7 +69,7 @@ installAdditionalDepend() {
 
             version_no_v=$(echo "$version" | tr -d v)
             curl -sSLo "lutris_${version_no_v}_all.deb" "https://github.com/lutris/lutris/releases/download/${version}/lutris_${version_no_v}_all.deb"
-            
+
             printf "%b\n" "${YELLOW}Installing Lutris...${RC}"
             "$ESCALATION_TOOL" "$PACKAGER" install ./lutris_"${version_no_v}"_all.deb
 
@@ -94,8 +94,7 @@ installAdditionalDepend() {
             DISTRO_DEPS='lutris'
             "$ESCALATION_TOOL" "$PACKAGER" -n install $DISTRO_DEPS
             ;;
-        *)
+        *) ;;
-            ;;
     esac
 }
 

core/tabs/system-setup/global-theme.sh

@@ -5,7 +5,7 @@
 install_theme_tools() {
     printf "%b\n" "${YELLOW}Installing theme tools (qt6ct and kvantum)...${RC}"
     case "$PACKAGER" in
-        apt-get|nala)
+        apt-get | nala)
             "$ESCALATION_TOOL" "$PACKAGER" install -y qt6ct kvantum
             ;;
         zypper)
@@ -47,7 +47,7 @@ applyTheming() {
 configure_qt6ct() {
     printf "%b\n" "${YELLOW}Configuring qt6ct...${RC}"
     mkdir -p "$HOME/.config/qt6ct"
-    cat <<EOF > "$HOME/.config/qt6ct/qt6ct.conf"
+    cat <<EOF >"$HOME/.config/qt6ct/qt6ct.conf"
 [Appearance]
 style=kvantum
 color_scheme=default
@@ -58,7 +58,7 @@ EOF
     # Add QT_QPA_PLATFORMTHEME to /etc/environment
     if ! grep -q "QT_QPA_PLATFORMTHEME=qt6ct" /etc/environment; then
         printf "%b\n" "${YELLOW}Adding QT_QPA_PLATFORMTHEME to /etc/environment...${RC}"
-        echo "QT_QPA_PLATFORMTHEME=qt6ct" | "$ESCALATION_TOOL" tee -a /etc/environment > /dev/null
+        echo "QT_QPA_PLATFORMTHEME=qt6ct" | "$ESCALATION_TOOL" tee -a /etc/environment >/dev/null
         printf "%b\n" "${GREEN}QT_QPA_PLATFORMTHEME added to /etc/environment.${RC}"
     else
         printf "%b\n" "${GREEN}QT_QPA_PLATFORMTHEME already set in /etc/environment.${RC}"
@@ -68,7 +68,7 @@ EOF
 configure_kvantum() {
     printf "%b\n" "${YELLOW}Configuring Kvantum...${RC}"
     mkdir -p "$HOME/.config/Kvantum"
-    cat <<EOF > "$HOME/.config/Kvantum/kvantum.kvconfig"
+    cat <<EOF >"$HOME/.config/Kvantum/kvantum.kvconfig"
 [General]
 theme=KvArcDark
 EOF
@@ -85,4 +85,4 @@ applyTheming
 install_theme_tools
 configure_qt6ct
 configure_kvantum
-successOutput
+successOutput

core/tabs/system-setup/remove-snaps.sh

@@ -8,13 +8,13 @@ removeSnaps() {
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -Rns snapd
                 ;;
-            apt-get|nala)
+            apt-get | nala)
                 "$ESCALATION_TOOL" "$PACKAGER" autoremove --purge snapd
                 if [ "$ID" = ubuntu ]; then
                     "$ESCALATION_TOOL" apt-mark hold snapd
                 fi
                 ;;
-            dnf|zypper)
+            dnf | zypper)
                 "$ESCALATION_TOOL" "$PACKAGER" remove snapd
                 ;;
             *)

core/tabs/system-setup/system-cleanup.sh

@@ -5,9 +5,9 @@
 cleanup_system() {
     printf "%b\n" "${YELLOW}Performing system cleanup...${RC}"
     case "$PACKAGER" in
-        apt-get|nala)
+        apt-get | nala)
             "$ESCALATION_TOOL" "$PACKAGER" clean
-            "$ESCALATION_TOOL" "$PACKAGER" autoremove -y 
+            "$ESCALATION_TOOL" "$PACKAGER" autoremove -y
             "$ESCALATION_TOOL" du -h /var/cache/apt
             ;;
         zypper)
@@ -21,7 +21,8 @@ cleanup_system() {
             ;;
         pacman)
             "$ESCALATION_TOOL" "$PACKAGER" -Sc --noconfirm
-            "$ESCALATION_TOOL" "$PACKAGER" -Rns $(pacman -Qtdq) --noconfirm > /dev/null 2>&1
+            # shellcheck disable=SC2046
+            "$ESCALATION_TOOL" "$PACKAGER" -Rns $(pacman -Qtdq) --noconfirm >/dev/null 2>&1
             ;;
         *)
             printf "%b\n" "${RED}Unsupported package manager: ${PACKAGER}. Skipping.${RC}"
@@ -46,7 +47,7 @@ clean_data() {
     printf "%b" "${YELLOW}Clean up old cache files and empty the trash? (y/N): ${RC}"
     read -r clean_response
     case $clean_response in
-        y|Y)
+        y | Y)
             printf "%b\n" "${YELLOW}Cleaning up old cache files and emptying trash...${RC}"
             if [ -d "$HOME/.cache" ]; then
                 find "$HOME/.cache/" -type f -atime +5 -delete

core/tabs/system-setup/system-update.sh

@@ -20,17 +20,19 @@ fastUpdate() {
                 dtype_local="arch"
             fi
 
-            "$ESCALATION_TOOL" rate-mirrors --top-mirrors-number-to-retest=5 --disable-comments --save /etc/pacman.d/mirrorlist --allow-root ${dtype_local}
+            if "$ESCALATION_TOOL" rate-mirrors --top-mirrors-number-to-retest=5 --disable-comments --save /etc/pacman.d/mirrorlist --allow-root "$dtype_local" || [ ! -s /etc/pacman.d/mirrorlist ]; then
-            if [ $? -ne 0 ] || [ ! -s /etc/pacman.d/mirrorlist ]; then
                 printf "%b\n" "${RED}Rate-mirrors failed, restoring backup.${RC}"
                 "$ESCALATION_TOOL" cp /etc/pacman.d/mirrorlist.bak /etc/pacman.d/mirrorlist
             fi
             ;;
 
-        apt-get|nala)
+        apt-get | nala)
             "$ESCALATION_TOOL" apt-get update
             if ! command_exists nala; then
-                "$ESCALATION_TOOL" apt-get install -y nala || { printf "%b\n" "${YELLOW}Falling back to apt-get${RC}"; PACKAGER="apt-get"; }
+                "$ESCALATION_TOOL" apt-get install -y nala || {
+                    printf "%b\n" "${YELLOW}Falling back to apt-get${RC}"
+                    PACKAGER="apt-get"
+                }
             fi
 
             if [ "$PACKAGER" = "nala" ]; then
@@ -49,7 +51,7 @@ fastUpdate() {
             "$ESCALATION_TOOL" "$PACKAGER" --non-interactive dup
             ;;
         *)
-            printf "%b\n" "${RED}Unsupported package manager: "$PACKAGER"${RC}"
+            printf "%b\n" "${RED}Unsupported package manager: ${PACKAGER}${RC}"
             exit 1
             ;;
     esac
@@ -58,7 +60,7 @@ fastUpdate() {
 updateSystem() {
     printf "%b\n" "${GREEN}Updating system${RC}"
     case "$PACKAGER" in
-        apt-get|nala)
+        apt-get | nala)
             "$ESCALATION_TOOL" "$PACKAGER" update
             "$ESCALATION_TOOL" "$PACKAGER" upgrade -y
             ;;
@@ -75,7 +77,7 @@ updateSystem() {
             "$ESCALATION_TOOL" "$PACKAGER" --non-interactive dup
             ;;
         *)
-            printf "%b\n" "${RED}Unsupported package manager: "$PACKAGER"${RC}"
+            printf "%b\n" "${RED}Unsupported package manager: ${PACKAGER}${RC}"
             exit 1
             ;;
     esac

core/tabs/system-setup/terminus-tty.sh

@@ -2,15 +2,15 @@
 
 . ../common-script.sh
 InstallTermiusFonts() {
-    if [ ! -f "/usr/share/kbd/consolefonts/ter-c18b.psf.gz" ] && 
+    if [ ! -f "/usr/share/kbd/consolefonts/ter-c18b.psf.gz" ] &&
-       [ ! -f "/usr/share/consolefonts/Uni3-TerminusBold18x10.psf.gz" ] && 
+        [ ! -f "/usr/share/consolefonts/Uni3-TerminusBold18x10.psf.gz" ] &&
-       [ ! -f "/usr/lib/kbd/consolefonts/ter-p32n.psf.gz" ]; then
+        [ ! -f "/usr/lib/kbd/consolefonts/ter-p32n.psf.gz" ]; then
-    printf "%b\n" "${YELLOW}Installing Terminus Fonts...${RC}"
+        printf "%b\n" "${YELLOW}Installing Terminus Fonts...${RC}"
         case "$PACKAGER" in
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm terminus-font
                 ;;
-            apt-get|nala)
+            apt-get | nala)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y fonts-terminus
                 ;;
             dnf)
@@ -27,38 +27,38 @@ InstallTermiusFonts() {
 }
 
 SetTermiusFonts() {
-        case "$DTYPE" in
+    case "$DTYPE" in
-            arch)
+        arch)
-                printf "%b\n" "${YELLOW}Updating FONT= line in /etc/vconsole.conf...${RC}"
+            printf "%b\n" "${YELLOW}Updating FONT= line in /etc/vconsole.conf...${RC}"
-                "$ESCALATION_TOOL" sed -i 's/^FONT=.*/FONT=ter-v32b/' /etc/vconsole.conf
+            "$ESCALATION_TOOL" sed -i 's/^FONT=.*/FONT=ter-v32b/' /etc/vconsole.conf
-                if [ -z "$DISPLAY" ] && [ -z "$WAYLAND_DISPLAY" ]; then
+            if [ -z "$DISPLAY" ] && [ -z "$WAYLAND_DISPLAY" ]; then
-                   "$ESCALATION_TOOL" setfont -C /dev/tty1 ter-v32b
+                "$ESCALATION_TOOL" setfont -C /dev/tty1 ter-v32b
-                fi
+            fi
-                printf "%b\n" "${GREEN}Terminus font set for TTY.${RC}"
+            printf "%b\n" "${GREEN}Terminus font set for TTY.${RC}"
-                ;;
+            ;;
-            debian)
+        debian)
-                
+
-                printf "%b\n" "${YELLOW}Updating console-setup configuration...${RC}"
+            printf "%b\n" "${YELLOW}Updating console-setup configuration...${RC}"
-                "$ESCALATION_TOOL" sed -i 's/^CODESET=.*/CODESET="guess"/' /etc/default/console-setup
+            "$ESCALATION_TOOL" sed -i 's/^CODESET=.*/CODESET="guess"/' /etc/default/console-setup
-                "$ESCALATION_TOOL" sed -i 's/^FONTFACE=.*/FONTFACE="TerminusBold"/' /etc/default/console-setup
+            "$ESCALATION_TOOL" sed -i 's/^FONTFACE=.*/FONTFACE="TerminusBold"/' /etc/default/console-setup
-                "$ESCALATION_TOOL" sed -i 's/^FONTSIZE=.*/FONTSIZE="16x32"/' /etc/default/console-setup
+            "$ESCALATION_TOOL" sed -i 's/^FONTSIZE=.*/FONTSIZE="16x32"/' /etc/default/console-setup
-                printf "%b\n" "${GREEN}Console-setup configuration updated for Terminus font.${RC}"
+            printf "%b\n" "${GREEN}Console-setup configuration updated for Terminus font.${RC}"
-                # Editing console-setup requires initramfs to be regenerated
+            # Editing console-setup requires initramfs to be regenerated
-                "$ESCALATION_TOOL" update-initramfs -u
+            "$ESCALATION_TOOL" update-initramfs -u
-                if [ -z "$DISPLAY" ] && [ -z "$WAYLAND_DISPLAY" ]; then                    
+            if [ -z "$DISPLAY" ] && [ -z "$WAYLAND_DISPLAY" ]; then
-                   "$ESCALATION_TOOL" setfont -C /dev/tty1 /usr/share/consolefonts/Uni3-TerminusBold32x16.psf.gz
+                "$ESCALATION_TOOL" setfont -C /dev/tty1 /usr/share/consolefonts/Uni3-TerminusBold32x16.psf.gz
-                fi
+            fi
-                printf "%b\n" "${GREEN}Terminus font has been set for TTY.${RC}"
+            printf "%b\n" "${GREEN}Terminus font has been set for TTY.${RC}"
-                ;;
+            ;;
-            fedora)
+        fedora)
-                printf "%b\n" "${YELLOW}Updating FONT= line in /etc/vconsole.conf...${RC}"
+            printf "%b\n" "${YELLOW}Updating FONT= line in /etc/vconsole.conf...${RC}"
-                "$ESCALATION_TOOL" sed -i 's/^FONT=.*/FONT=ter-v32b/' /etc/vconsole.conf
+            "$ESCALATION_TOOL" sed -i 's/^FONT=.*/FONT=ter-v32b/' /etc/vconsole.conf
-                if [ -z "$DISPLAY" ] && [ -z "$WAYLAND_DISPLAY" ]; then 
+            if [ -z "$DISPLAY" ] && [ -z "$WAYLAND_DISPLAY" ]; then
-                  "$ESCALATION_TOOL" setfont -C /dev/tty1 ter-v32b
+                "$ESCALATION_TOOL" setfont -C /dev/tty1 ter-v32b
-                fi               
+            fi
-                printf "%b\n" "${GREEN}Terminus font has been set for TTY.${RC}"
+            printf "%b\n" "${GREEN}Terminus font has been set for TTY.${RC}"
-                ;;
+            ;;
-        esac
+    esac
 }
 
 checkEnv

core/tabs/utils/auto-login.sh

@@ -1,6 +1,6 @@
-#!/bin/sh -e 
+#!/bin/sh -e
 
-. ../common-script.sh   
+. ../common-script.sh
 
 # Function to list common session options
 list_sessions() {
@@ -28,12 +28,14 @@ list_sessions() {
         7) session="mate.desktop" ;;
         8) session="openbox.desktop" ;;
         9) session="i3.desktop" ;;
-        10) 
+        10)
             printf "%b" "Enter custom session name (e.g., mysession): "
-            read -r session ;;
+            read -r session
-        *) 
+            ;;
+        *)
             printf "%b\n" "Invalid option selected."
-            exit 1 ;;
+            exit 1
+            ;;
     esac
 }
 
@@ -84,7 +86,7 @@ configure_sddm() {
     printf "%b\n" "Configuring SDDM for autologin..."
     printf "%b" "Enter username for SDDM autologin: "
     read -r user
-    list_sessions  # Show session options
+    list_sessions # Show session options
 
     printf "%b\n" '[Autologin]' | "$ESCALATION_TOOL" tee -a /etc/sddm.conf
     printf "%s\n" "User=$user" | "$ESCALATION_TOOL" tee -a /etc/sddm.conf
@@ -105,8 +107,8 @@ configure_lxdm() {
     printf "%b\n" "Configuring LXDM for autologin..."
     printf "%b" "Enter username for LXDM autologin: "
     read -r user
-    list_sessions  # Show session options
+    list_sessions # Show session options
-    
+
     "$ESCALATION_TOOL" sed -i'' "s/^#.*autologin=.*$/autologin=${user}/" /etc/lxdm/lxdm.conf
     "$ESCALATION_TOOL" sed -i'' "s|^#.*session=.*$|session=/usr/bin/${session}|; s|^session=.*$|session=/usr/bin/${session}|" /etc/lxdm/lxdm.conf
 

core/tabs/utils/auto-mount.sh

@@ -58,21 +58,20 @@ update_fstab() {
     fstab_entry="UUID=$UUID $mount_point $FSTYPE defaults 0 2"
 
     # Append the comment and the entry to /etc/fstab
-    printf "%b\n" "$comment" | "$ESCALATION_TOOL"  tee -a /etc/fstab > /dev/null
+    printf "%b\n" "$comment" | "$ESCALATION_TOOL" tee -a /etc/fstab >/dev/null
-    printf "%b\n" "$fstab_entry" | "$ESCALATION_TOOL"  tee -a /etc/fstab > /dev/null
+    printf "%b\n" "$fstab_entry" | "$ESCALATION_TOOL" tee -a /etc/fstab >/dev/null
-    printf "%b\n" "" | "$ESCALATION_TOOL" tee -a /etc/fstab > /dev/null
+    printf "%b\n" "" | "$ESCALATION_TOOL" tee -a /etc/fstab >/dev/null
 
     printf "%b\n" "Entry added to /etc/fstab:"
     printf "%b\n" "$comment"
     printf "%b\n" "$fstab_entry"
 }
 
-
 # Function to mount the drive
 mount_drive() {
     printf "%b\n" "Mounting the drive..."
-    "$ESCALATION_TOOL"  mount -a
+    "$ESCALATION_TOOL" mount -a
-    if mount | grep "$mount_point" > /dev/null; then
+    if mount | grep "$mount_point" >/dev/null; then
         printf "%b\n" "${GREEN}Drive mounted successfully at $mount_point${RC}."
     else
         printf "%b\n" "${RED}Failed to mount the drive.${RC}"

core/tabs/utils/bluetooth-control.sh

@@ -2,13 +2,12 @@
 
 . ../common-script.sh
 
-# Function to check Bluez is installed
 setupBluetooth() {
     printf "%b\n" "${YELLOW}Installing Bluez...${RC}"
     if ! command_exists bluetoothctl; then
         case "$PACKAGER" in
             pacman)
-                "$ESCALATION_TOOL" "$PACKAGER" -S --noconfirm bluez-utils
+                "$ESCALATION_TOOL" "$PACKAGER" -S --noconfirm bluez-utils bluez
                 ;;
             *)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y bluez
@@ -18,18 +17,16 @@ setupBluetooth() {
         printf "%b\n" "${GREEN}Bluez is already installed.${RC}"
     fi
 
-    # Check if bluetooth service is running
     if ! systemctl is-active --quiet bluetooth; then
         printf "%b\n" "${YELLOW}Bluetooth service is not running. Starting it now...${RC}"
         "$ESCALATION_TOOL" systemctl start bluetooth
-        
+
         if systemctl is-active --quiet bluetooth; then
             printf "%b\n" "${GREEN}Bluetooth service started successfully.${RC}"
         fi
     fi
 }
 
-# Function to display the main menu
 main_menu() {
     while true; do
         clear
@@ -56,7 +53,6 @@ main_menu() {
     done
 }
 
-# Function to scan for devices
 scan_devices() {
     clear
     printf "%b\n" "${YELLOW}Scanning for devices...${RC}"
@@ -69,16 +65,14 @@ scan_devices() {
         printf "%b\n" "$devices"
     fi
     printf "%b" "Press any key to return to the main menu..."
-    read -r dummy
+    read -r _
 }
 
-# Function to prompt for MAC address using numbers
 prompt_for_mac() {
-    action=$1
+    command=$1
-    command=$2
+    prompt_msg=$2
-    prompt_msg=$3
+    success_msg=$3
-    success_msg=$4
+    failure_msg=$4
-    failure_msg=$5
 
     while true; do
         clear
@@ -86,7 +80,7 @@ prompt_for_mac() {
         if [ -z "$devices" ]; then
             printf "%b\n" "${RED}No devices available. Please scan for devices first.${RC}"
             printf "%b" "Press any key to return to the main menu..."
-            read -r dummy
+            read -r _
             return
         fi
 
@@ -95,23 +89,24 @@ prompt_for_mac() {
         i=1
         echo "$device_list" | while IFS= read -r device; do
             printf "%d. %s\n" "$i" "$device"
+            #shellcheck disable=SC2030
             i=$((i + 1))
         done
         printf "%b\n" "0. Exit to main menu"
         printf "%b\n" "$prompt_msg"
         read -r choice
 
-        # Validate the choice
+        # shellcheck disable=SC2031
         if echo "$choice" | grep -qE '^[0-9]+$' && [ "$choice" -le "$((i - 1))" ] && [ "$choice" -gt 0 ]; then
             device=$(echo "$device_list" | sed -n "${choice}p")
             mac=$(echo "$device" | awk '{print $2}')
-            if bluetoothctl info "$mac" > /dev/null 2>&1; then
+            if bluetoothctl info "$mac" >/dev/null 2>&1; then
-                bluetoothctl "$command" "$mac" && {
+                if bluetoothctl "$command" "$mac"; then
                     printf "%b\n" "${GREEN}$success_msg${RC}"
                     break
-                } || {
+                else
                     printf "%b\n" "${RED}$failure_msg${RC}"
-                }
+                fi
             else
                 printf "%b\n" "${RED}Invalid MAC address. Please try again.${RC}"
             fi
@@ -122,30 +117,25 @@ prompt_for_mac() {
         fi
     done
     printf "%b" "Press any key to return to the main menu..."
-    read -r dummy
+    read -r _
 }
 
-# Function to pair with a device
 pair_device() {
-    prompt_for_mac "pair" "pair" "Enter the number of the device to pair: " "Pairing with device completed." "Failed to pair with device."
+    prompt_for_mac "pair" "Enter the number of the device to pair: " "Pairing with device completed." "Failed to pair with device."
 }
 
-# Function to connect to a device
 connect_device() {
-    prompt_for_mac "connect" "connect" "Enter the number of the device to connect: " "Connecting to device completed." "Failed to connect to device."
+    prompt_for_mac "connect" "Enter the number of the device to connect: " "Connecting to device completed." "Failed to connect to device."
 }
 
-# Function to disconnect from a device
 disconnect_device() {
-    prompt_for_mac "disconnect" "disconnect" "Enter the number of the device to disconnect: " "Disconnecting from device completed." "Failed to disconnect from device."
+    prompt_for_mac "disconnect" "Enter the number of the device to disconnect: " "Disconnecting from device completed." "Failed to disconnect from device."
 }
 
-# Function to remove a device
 remove_device() {
-    prompt_for_mac "remove" "remove" "Enter the number of the device to remove: " "Removing device completed." "Failed to remove device."
+    prompt_for_mac "remove" "Enter the number of the device to remove: " "Removing device completed." "Failed to remove device."
 }
 
-# Initialize
 checkEnv
 checkEscalationTool
 setupBluetooth

core/tabs/utils/create-bootable-usb.sh

@@ -1,10 +1,9 @@
 #!/bin/sh -e
 
-. ../common-script.sh  
+. ../common-script.sh
 
 CONFIGURATION_URL="https://github.com/quickemu-project/quickget_configs/releases/download/daily/quickget_data.json"
 
-# Function to display all available block devices
 list_devices() {
     printf "%b\n" "${YELLOW} Available devices and partitions: ${RC}"
     printf "\n"
@@ -12,17 +11,21 @@ list_devices() {
     printf "\n"
 }
 
+# shellcheck disable=SC2086
 installDependencies() {
     DEPENDENCIES="xz gzip bzip2 jq"
     if ! command_exists ${DEPENDENCIES}; then
         printf "%b\n" "${YELLOW}Installing dependencies...${RC}"
         case "${PACKAGER}" in
-            apt-get|nala)
+            apt-get | nala)
-                "${ESCALATION_TOOL}" "${PACKAGER}" install -y xz-utils gzip bzip2 jq;;
+                "${ESCALATION_TOOL}" "${PACKAGER}" install -y xz-utils gzip bzip2 jq
-            dnf|zypper)
+                ;;
-                "${ESCALATION_TOOL}" "${PACKAGER}" install -y ${DEPENDENCIES};;
+            dnf | zypper)
+                "${ESCALATION_TOOL}" "${PACKAGER}" install -y ${DEPENDENCIES}
+                ;;
             pacman)
-                "${ESCALATION_TOOL}" "${PACKAGER}" -S --noconfirm --needed ${DEPENDENCIES};;
+                "${ESCALATION_TOOL}" "${PACKAGER}" -S --noconfirm --needed ${DEPENDENCIES}
+                ;;
             *)
                 printf "%b\n" "${RED}Unsupported package manager.${RC}"
                 exit 1
@@ -31,7 +34,6 @@ installDependencies() {
     fi
 }
 
-# Function to ask whether to use local or online ISO
 choose_iso_source() {
     printf "%b\n" "${YELLOW} Do you want to use a local ISO or download online? ${RC}"
     printf "1) Download online\n"
@@ -64,14 +66,17 @@ decompress_iso() {
     case "${ISO_ARCHIVE_FORMAT}" in
         xz)
             xz -d "${ISO_PATH}"
-            ISO_PATH="$(echo "${ISO_PATH}" | sed 's/\.xz//')";;
+            ISO_PATH="$(echo "${ISO_PATH}" | sed 's/\.xz//')"
+            ;;
         gz)
             gzip -d "${ISO_PATH}"
-            ISO_PATH="$(echo "${ISO_PATH}" | sed 's/\.gz//')";;
+            ISO_PATH="$(echo "${ISO_PATH}" | sed 's/\.gz//')"
+            ;;
         bz2)
             bzip2 -d "${ISO_PATH}"
-            ISO_PATH="$(echo "${ISO_PATH}" | sed 's/\.bz2//')";;
+            ISO_PATH="$(echo "${ISO_PATH}" | sed 's/\.bz2//')"
-        *) 
+            ;;
+        *)
             printf "%b\n" "${RED}Unsupported archive format. Try manually decompressing the ISO and choosing it as a local file instead.${RC}"
             exit 1
             ;;
@@ -82,12 +87,14 @@ decompress_iso() {
 
 check_hash() {
     case "${#ISO_CHECKSUM}" in
-        32) HASH_ALGO="md5sum";;
+        32) HASH_ALGO="md5sum" ;;
-        40) HASH_ALGO="sha1sum";;
+        40) HASH_ALGO="sha1sum" ;;
-        64) HASH_ALGO="sha256sum";;
+        64) HASH_ALGO="sha256sum" ;;
-        128) HASH_ALGO="sha512sum";;
+        128) HASH_ALGO="sha512sum" ;;
-        *) printf "%b\n" "${RED}Invalid checksum length. Skipping checksum verification.${RC}"
+        *)
-            return;;
+            printf "%b\n" "${RED}Invalid checksum length. Skipping checksum verification.${RC}"
+            return
+            ;;
     esac
     printf "%b\n" "Checking ISO integrity using ${HASH_ALGO}..."
     if ! echo "${ISO_CHECKSUM} ${ISO_PATH}" | "${HASH_ALGO}" --check --status; then
@@ -115,9 +122,9 @@ get_architecture() {
     printf "%b" "Select an option (1-3): "
     read -r ARCH
     case "${ARCH}" in
-        1) ARCH="x86_64";;
+        1) ARCH="x86_64" ;;
-        2) ARCH="aarch64";;
+        2) ARCH="aarch64" ;;
-        3) ARCH="riscv64";;
+        3) ARCH="riscv64" ;;
         *)
             printf "%b\n" "${RED}Invalid architecture selected. ${RC}"
             exit 1
@@ -209,27 +216,21 @@ get_online_iso() {
     fi
 }
 
-write_iso(){  
+write_iso() {
     clear
-
-     # Ask whether to use a local or online ISO
     choose_iso_source
 
     clear
-    # Display all available devices
     list_devices
 
-    # Prompt user for USB device
     printf "%b" "Enter the USB device (e.g. /dev/sdX): "
     read -r USB_DEVICE
 
-    # Verify that the USB device exists
     if [ ! -b "$USB_DEVICE" ]; then
         printf "%b\n" "${RED}USB device not found: $USB_DEVICE${RC}"
         exit 1
     fi
 
-    # Confirm the device selection with the user
     printf "%b" "${RED}WARNING: This will erase all data on ${USB_DEVICE}. Are you sure you want to continue? (y/N): ${RC}"
     read -r CONFIRMATION
 
@@ -238,22 +239,19 @@ write_iso(){
         exit 1
     fi
 
-    # Display progress and create the bootable USB drive
     printf "%b\n" "${YELLOW}Creating bootable USB drive...${RC}"
     if ! "$ESCALATION_TOOL" dd if="$ISO_PATH" of="$USB_DEVICE" bs=4M status=progress oflag=sync; then
         printf "%b\n" "${RED}Failed to create bootable USB drive${RC}"
         exit 1
     fi
 
-    # Sync to ensure all data is written
     if ! "$ESCALATION_TOOL" sync; then
-        printf "%b\n" "${RED}Failed to sync data${RC}"                              
+        printf "%b\n" "${RED}Failed to sync data${RC}"
         exit 1
     fi
 
     printf "%b\n" "${GREEN}Bootable USB drive created successfully!${RC}"
 
-    # Eject the USB device
     printf "%b\n" "${YELLOW}Ejecting ${USB_DEVICE}...${RC}"
     if ! "$ESCALATION_TOOL" umount "${USB_DEVICE}"* 2>/dev/null; then
         printf "%b\n" "${RED}Failed to unmount ${USB_DEVICE}${RC}"

core/tabs/utils/encrypt_decrypt_tool.sh

@@ -1,16 +1,17 @@
 #!/bin/sh -e
 
+# shellcheck disable=SC2181
+
 . ../common-script.sh
-# Function to display the menu
+
 printf "%b\n" "${YELLOW}Ensuring OpenSSL is installed...${RC}"
 
-# Install OpenSSL
 if ! command_exists openssl; then
     case "$PACKAGER" in
         pacman)
             "$ESCALATION_TOOL" "$PACKAGER" -S --noconfirm --needed openssl
             ;;
-        apt-get|nala)
+        apt-get | nala)
             "$ESCALATION_TOOL" "$PACKAGER" install -y openssl
             ;;
         dnf)
@@ -40,7 +41,6 @@ show_menu() {
     printf "%b\n" "========================================================"
 }
 
-# Function to encrypt a file
 encrypt_file() {
     printf "%b" "Enter the path to the file or directory to encrypt: "
     read -r INPUT_PATH
@@ -49,7 +49,7 @@ encrypt_file() {
         printf "%b\n" "Path does not exist!"
         return
     fi
-    
+
     printf "%b" "Enter the path for the encrypted file or directory: "
     read -r OUTPUT_PATH
 
@@ -59,15 +59,12 @@ encrypt_file() {
     if [ -d "$INPUT_PATH" ]; then
         # Encrypt each file in the directory
         find "$INPUT_PATH" -type f | while read -r FILE; do
-            REL_PATH="${FILE#$INPUT_PATH/}"
+            REL_PATH="${FILE#"$INPUT_PATH"/}"
             OUTPUT_FILE="$OUTPUT_PATH/$REL_PATH.enc"
             mkdir -p "$(dirname "$OUTPUT_FILE")"
             openssl enc -aes-256-cbc -salt -pbkdf2 -in "$FILE" -out "$OUTPUT_FILE" -k "$PASSWORD"
-            if [ $? -eq 0 ]; then
+
-                printf "%b\n" "Encrypted: $OUTPUT_FILE"
+            printf "%b\n" "Encrypted: $OUTPUT_FILE"
-            else
-                printf "%b\n" "Failed to encrypt: $FILE"
-            fi
         done
     else
         # Encrypt a single file
@@ -77,15 +74,11 @@ encrypt_file() {
         fi
         mkdir -p "$(dirname "$OUTPUT_PATH")"
         openssl enc -aes-256-cbc -salt -pbkdf2 -in "$INPUT_PATH" -out "$OUTPUT_PATH" -k "$PASSWORD"
-        if [ $? -eq 0 ]; then
+
-            printf "%b\n" "Encrypted: $OUTPUT_PATH"
+        printf "%b\n" "Encrypted: $OUTPUT_PATH"
-        else
-            printf "%b\n" "Failed to encrypt: $INPUT_PATH"
-        fi
     fi
 }
 
-# Function to decrypt a file
 decrypt_file() {
     printf "%b" "Enter the path to the file or directory to decrypt: "
     read -r INPUT_PATH
@@ -104,15 +97,12 @@ decrypt_file() {
     if [ -d "$INPUT_PATH" ]; then
         # Decrypt each file in the directory
         find "$INPUT_PATH" -type f -name '*.enc' | while read -r FILE; do
-            REL_PATH="${FILE#$INPUT_PATH/}"
+            REL_PATH="${FILE#"$INPUT_PATH"/}"
             OUTPUT_FILE="$OUTPUT_PATH/${REL_PATH%.enc}"
             mkdir -p "$(dirname "$OUTPUT_FILE")"
             openssl enc -aes-256-cbc -d -pbkdf2 -in "$FILE" -out "$OUTPUT_FILE" -k "$PASSWORD"
-            if [ $? -eq 0 ]; then
+
-                printf "%b\n" "Decrypted: $OUTPUT_FILE"
+            printf "%b\n" "Decrypted: $OUTPUT_FILE"
-            else
-                printf "%b\n" "Failed to decrypt: $FILE"
-            fi
         done
     else
         # Decrypt a single file
@@ -122,15 +112,12 @@ decrypt_file() {
         fi
         mkdir -p "$(dirname "$OUTPUT_PATH")"
         openssl enc -aes-256-cbc -d -pbkdf2 -in "$INPUT_PATH" -out "$OUTPUT_PATH" -k "$PASSWORD"
-        if [ $? -eq 0 ]; then
+
-            printf "%b\n" "Decrypted: $OUTPUT_PATH"
+        printf "%b\n" "Decrypted: $OUTPUT_PATH"
-        else
-            printf "%b\n" "Failed to decrypt: $INPUT_PATH"
-        fi
     fi
 }
 
-main(){
+main() {
     clear
     while true; do
         show_menu
@@ -140,15 +127,18 @@ main(){
         case $CHOICE in
             1) encrypt_file ;;
             2) decrypt_file ;;
-            3) printf "%b\n" "Exiting..."; exit 0 ;;
+            3)
+                printf "%b\n" "Exiting..."
+                exit 0
+                ;;
             *) printf "%b\n" "Invalid choice. Please try again." ;;
         esac
 
         printf "%b\n" "Press [Enter] to continue..."
-        read -r dummy
+        read -r _
     done
 }
 
 checkEnv
 checkEscalationTool
-main
+main

core/tabs/utils/monitor-control/auto_detect_displays.sh

@@ -8,7 +8,7 @@
 auto_detect_displays() {
     if confirm_action "Auto-detect displays and set common resolution?"; then
         execute_command "xrandr --auto"
-        
+
         monitors=$(detect_connected_monitors)
         first_monitor=$(echo "$monitors" | head -n 1)
         common_resolutions=$(get_unique_resolutions "$first_monitor")
@@ -18,14 +18,14 @@ auto_detect_displays() {
             temp_common_resolutions=$(mktemp)
             temp_resolutions=$(mktemp)
 
-            printf "%b\n" "$common_resolutions" > "$temp_common_resolutions"
+            printf "%b\n" "$common_resolutions" >"$temp_common_resolutions"
-            printf "%b\n" "$resolutions" > "$temp_resolutions"
+            printf "%b\n" "$resolutions" >"$temp_resolutions"
 
             common_resolutions=$(comm -12 "$temp_common_resolutions" "$temp_resolutions")
 
             rm -f "$temp_common_resolutions" "$temp_resolutions"
         done
-        
+
         if [ -z "$common_resolutions" ]; then
             printf "%b\n" "${RED}No common resolution found among connected monitors.${RC}"
             return

core/tabs/utils/monitor-control/change_orientation.sh

@@ -47,7 +47,10 @@ change_orientation() {
         2) orientation="left" ;;
         3) orientation="right" ;;
         4) orientation="inverted" ;;
-        *) printf "%b\n" "${RED}Invalid selection.${RC}"; return ;;
+        *)
+            printf "%b\n" "${RED}Invalid selection.${RC}"
+            return
+            ;;
     esac
 
     if confirm_action "Change orientation of $monitor_name to $orientation?"; then

core/tabs/utils/monitor-control/disable_monitor.sh

@@ -31,7 +31,7 @@ disable_monitor() {
     monitor_name=$(echo "$monitor_array" | cut -d' ' -f"$monitor_choice")
 
     printf "%b\n" "${RED}Warning: Disabling the monitor will turn it off and may affect your display setup.${RC}"
-    
+
     if confirm_action "Do you really want to disable ${GREEN}$monitor_name${RC}?"; then
         printf "%b\n" "${GREEN}Disabling $monitor_name${RC}"
         execute_command "xrandr --output $monitor_name --off"

core/tabs/utils/monitor-control/enable_monitor.sh

@@ -14,7 +14,7 @@ enable_monitor() {
     printf "%b\n" "${YELLOW}  Enable Monitor${RC}"
     printf "%b\n" "${YELLOW}=========================================${RC}"
     printf "%b\n" "${YELLOW}Choose a monitor to enable: ${RC}"
-    
+
     i=1
     for monitor in $monitor_array; do
         printf "%b\n" "$i. ${GREEN}$monitor${RC}"

core/tabs/utils/monitor-control/extend_displays.sh

@@ -11,7 +11,7 @@ extend_displays() {
     i=1
     for monitor in $monitor_array; do
         if [ "$i" -gt 1 ]; then
-            prev_monitor=$(echo "$monitor_array" | cut -d' ' -f$((i-1)))
+            prev_monitor=$(echo "$monitor_array" | cut -d' ' -f$((i - 1)))
             if confirm_action "Extend $monitor to the right of $prev_monitor?"; then
                 printf "%b\n" "${GREEN}Extending $monitor to the right of $prev_monitor${RC}"
                 execute_command "xrandr --output $monitor --right-of $prev_monitor"

core/tabs/utils/monitor-control/manage_arrangement.sh

@@ -45,7 +45,10 @@ manage_arrangement() {
         2) position="--right-of" ;;
         3) position="--above" ;;
         4) position="--below" ;;
-        *) printf "%b\n" "${RED}Invalid selection.${RC}"; return ;;
+        *)
+            printf "%b\n" "${RED}Invalid selection.${RC}"
+            return
+            ;;
     esac
 
     printf "%b\n" "${YELLOW}Choose the reference monitor:${RC}"

core/tabs/utils/monitor-control/set_brightness.sh

@@ -29,7 +29,7 @@ adjust_monitor_brightness() {
         if ! echo "$monitor_choice" | grep -qE '^[0-9]+$'; then
             printf "%b\n" "${RED}Invalid selection. Please try again.${RC}"
             printf "Press [Enter] to continue..."
-            read -r dummy
+            read -r _
             continue
         fi
 
@@ -37,7 +37,7 @@ adjust_monitor_brightness() {
         if [ "$monitor_choice" -lt 1 ] || [ "$monitor_choice" -gt "$monitor_count" ]; then
             printf "%b\n" "${RED}Invalid selection. Please try again.${RC}"
             printf "Press [Enter] to continue..."
-            read -r dummy
+            read -r _
             continue
         fi
 

core/tabs/utils/monitor-control/set_resolutions.sh

@@ -4,7 +4,6 @@
 
 . ../../common-script.sh
 
-# Function to set resolutions
 set_resolutions() {
     monitor_list=$(detect_connected_monitors)
     monitor_array=$(echo "$monitor_list" | tr '\n' ' ')
@@ -33,7 +32,7 @@ set_resolutions() {
         if ! echo "$monitor_choice" | grep -qE '^[0-9]+$' || [ "$monitor_choice" -lt 1 ] || [ "$monitor_choice" -gt "$((i - 1))" ]; then
             printf "%b\n" "${RED}Invalid selection. Please try again.${RC}"
             printf "%b\n" "Press [Enter] to continue..."
-            read -r dummy
+            read -r _
             continue
         fi
 
@@ -41,13 +40,13 @@ set_resolutions() {
         resolutions=$(get_unique_resolutions "$monitor_name" | sort -rn -t'x' -k1,1 -k2,2)
 
         temp_res_file=$(mktemp)
-        printf "%b\n" "$resolutions" | awk '{print NR " " $0}' > "$temp_res_file"
+        printf "%b\n" "$resolutions" | awk '{print NR " " $0}' >"$temp_res_file"
 
         i=1
         while read -r resolution; do
-            echo "$resolution" >> "$temp_res_file"
+            echo "$resolution" >>"$temp_res_file"
             i=$((i + 1))
-        done < "$temp_res_file"
+        done <"$temp_res_file"
 
         clear
         printf "%b\n" "${YELLOW}=========================================${RC}"

core/tabs/utils/numlock.sh

@@ -8,8 +8,8 @@
 # Create a script to toggle numlock
 
 create_file() {
-  printf "%b\n" "Creating script..."
+    printf "%b\n" "Creating script..."
-  "$ESCALATION_TOOL" tee "/usr/local/bin/numlock" >/dev/null <<'EOF'
+    "$ESCALATION_TOOL" tee "/usr/local/bin/numlock" >/dev/null <<'EOF'
 #!/bin/bash
 
 for tty in /dev/tty{1..6}
@@ -18,13 +18,13 @@ do
 done
 EOF
 
-  "$ESCALATION_TOOL" chmod +x /usr/local/bin/numlock
+    "$ESCALATION_TOOL" chmod +x /usr/local/bin/numlock
 }
 
 # Create a systemd service to run the script on boot
 create_service() {
-  printf "%b\n" "Creating service..."
+    printf "%b\n" "Creating service..."
-  "$ESCALATION_TOOL" tee "/etc/systemd/system/numlock.service" >/dev/null <<'EOF'
+    "$ESCALATION_TOOL" tee "/etc/systemd/system/numlock.service" >/dev/null <<'EOF'
 [Unit]
 Description=numlock
         
@@ -39,24 +39,23 @@ EOF
 }
 
 numlockSetup() {
-  # Check if the script and service files exists
+    if [ ! -f "/usr/local/bin/numlock" ]; then
-  if [ ! -f "/usr/local/bin/numlock" ]; then
+        create_file
-    create_file
+    fi
-  fi
 
-  if [ ! -f "/etc/systemd/system/numlock.service" ]; then
+    if [ ! -f "/etc/systemd/system/numlock.service" ]; then
-    create_service
+        create_service
-  fi
+    fi
 
-  printf "%b" "Do you want to enable Numlock on boot? (y/N): "
+    printf "%b" "Do you want to enable Numlock on boot? (y/N): "
-  read -r confirm
+    read -r confirm
-  if [ "$confirm" = "y" ] || [ "$confirm" = "Y" ]; then
+    if [ "$confirm" = "y" ] || [ "$confirm" = "Y" ]; then
-    "$ESCALATION_TOOL" systemctl enable numlock.service --quiet
+        "$ESCALATION_TOOL" systemctl enable numlock.service --quiet
-    printf "%b\n" "Numlock will be enabled on boot"
+        printf "%b\n" "Numlock will be enabled on boot"
-  else
+    else
-    "$ESCALATION_TOOL" systemctl disable numlock.service --quiet
+        "$ESCALATION_TOOL" systemctl disable numlock.service --quiet
-    printf "%b\n" "Numlock will not be enabled on boot"
+        printf "%b\n" "Numlock will not be enabled on boot"
-  fi
+    fi
 }
 
 checkEnv

core/tabs/utils/ollama.sh

@@ -11,7 +11,7 @@ installollama() {
     else
         printf "%b\n" "${YELLOW}Installing ollama...${RC}"
         curl -fsSL https://ollama.com/install.sh | sh
-        "$ESCALATION_TOOL" systemctl start ollama 
+        "$ESCALATION_TOOL" systemctl start ollama
     fi
 }
 
@@ -52,27 +52,26 @@ display_models() {
     printf "%b\n" "16. Solar - 10.7B (6.1GB)"
 }
 
-# Function to select model based on user input
 select_model() {
     choice="$1"
     case $choice in
-        1) printf "%b\n" "llama3.1";;
+        1) printf "%b\n" "llama3.1" ;;
-        2) printf "%b\n" "llama3.1:70b";;
+        2) printf "%b\n" "llama3.1:70b" ;;
-        3) printf "%b\n" "llama3.1:405b";;
+        3) printf "%b\n" "llama3.1:405b" ;;
-        4) printf "%b\n" "phi3";;
+        4) printf "%b\n" "phi3" ;;
-        5) printf "%b\n" "phi3:medium";;
+        5) printf "%b\n" "phi3:medium" ;;
-        6) printf "%b\n" "gemma2:2b";;
+        6) printf "%b\n" "gemma2:2b" ;;
-        7) printf "%b\n" "gemma2";;
+        7) printf "%b\n" "gemma2" ;;
-        8) printf "%b\n" "gemma2:27b";;
+        8) printf "%b\n" "gemma2:27b" ;;
-        9) printf "%b\n" "mistral";;
+        9) printf "%b\n" "mistral" ;;
-        10) printf "%b\n" "moondream";;
+        10) printf "%b\n" "moondream" ;;
-        11) printf "%b\n" "neural-chat";;
+        11) printf "%b\n" "neural-chat" ;;
-        12) printf "%b\n" "starling-lm";;
+        12) printf "%b\n" "starling-lm" ;;
-        13) printf "%b\n" "codellama";;
+        13) printf "%b\n" "codellama" ;;
-        14) printf "%b\n" "llama2-uncensored";;
+        14) printf "%b\n" "llama2-uncensored" ;;
-        15) printf "%b\n" "llava";;
+        15) printf "%b\n" "llava" ;;
-        16) printf "%b\n" "solar";;
+        16) printf "%b\n" "solar" ;;
-        *) printf "%b\n" "$choice";;
+        *) printf "%b\n" "$choice" ;;
     esac
 }
 
@@ -82,10 +81,11 @@ run_model() {
 
     printf "%b\n" "${GREEN}Installed Models${RC}"
     installed_models=$(ollama list)
-    printf "%b\n" "${installed_models}"
+    printf "%b\n" "$installed_models"
 
     printf "%b\n" "${YELLOW}Custom Models${RC}"
-    custom_models=$(ollama list | grep 'custom-model-prefix') 
+    custom_models=$(ollama list | grep 'custom-model-prefix')
+    printf "%b\n" "$custom_models"
 
     printf "%b" "Select a model to run: "
     printf "%b" "Enter the number corresponding to the model or enter the name of a custom model: "
@@ -103,7 +103,6 @@ create_model() {
     printf "%b\n" "${YELLOW}Let's create a new model in Ollama!${RC}"
     display_models
 
-    # Prompt for base model
     printf "%b" "Enter the base model (e.g. '13' for codellama): "
     read -r base_model
 
@@ -112,11 +111,9 @@ create_model() {
     printf "%b\n" "${YELLOW}Running the model: $model...${RC}"
     ollama pull "$model"
 
-    # Prompt for custom model name
     printf "%b" "Enter a name for the new customized model: "
     read -r custom_model_name
 
-    # Prompt for temperature setting
     printf "%b" "Enter the desired temperature (higher values are more creative, lower values are more coherent, e.g., 1): "
     read -r temperature
 
@@ -124,13 +121,11 @@ create_model() {
         temperature=${temperature:-1}
     fi
 
-    # Prompt for system message
     printf "%b" "Enter the system message for the model customization (e.g., 'You are Mario from Super Mario Bros. Answer as Mario, the assistant, only.'): "
     read -r system_message
 
-    # Create the Modelfile
     printf "%b\n" "${YELLOW}Creating the Modelfile...${RC}"
-    cat << EOF > Modelfile
+    cat <<EOF >Modelfile
 FROM $base_model
 
 # set the temperature to $temperature
@@ -142,13 +137,11 @@ $system_message
 """
 EOF
 
-    # Create the model in Ollama
     printf "%b\n" "${YELLOW}Creating the model in Ollama...${RC}"
     ollama create "$custom_model_name" -f Modelfile
     printf "%b\n" "${GREEN}Model '$custom_model_name' created successfully.${RC}"
 }
 
-# Function to remove a model
 remove_model() {
     clear
     printf "%b\n" "${GREEN}Installed Models${RC}"
@@ -189,13 +182,16 @@ menu() {
             2) show_model_info ;;
             3) create_model ;;
             4) run_model ;;
-            5) remove_model;;
+            5) remove_model ;;
-            6) printf "%b\n" "${GREEN}Exiting...${RC}"; exit 0 ;;
+            6)
+                printf "%b\n" "${GREEN}Exiting...${RC}"
+                exit 0
+                ;;
             *) printf "%b\n" "${RED}Invalid choice. Please try again.${RC}" ;;
         esac
 
         printf "%b\n" "${YELLOW}Press Enter to continue...${RC}"
-        read -r dummy
+        read -r _
     done
 }
 
@@ -203,4 +199,3 @@ checkEnv
 checkEscalationTool
 installollama
 menu
-

core/tabs/utils/power-profile.sh

@@ -34,7 +34,7 @@ installAutoCpufreq() {
         cd auto-cpufreq
         printf "%b\n" "${YELLOW}Running auto-cpufreq installer...${RC}"
         "$ESCALATION_TOOL" ./auto-cpufreq-installer
-        "$ESCALATION_TOOL"  auto-cpufreq --install
+        "$ESCALATION_TOOL" auto-cpufreq --install
 
         cd ..
     fi

core/tabs/utils/samba-ssh-setup.sh

@@ -1,24 +1,24 @@
 #!/bin/sh -e
 
 # Load common script functions
-. ../common-script.sh  
+. ../common-script.sh
 
 # Function to install packages based on the package manager
 install_package() {
-    PACKAGE=$1
+    package=$1
-    if ! command_exists "$PACKAGE"; then
+    if ! command_exists "$package"; then
         case "$PACKAGER" in
             pacman)
-                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm "$PACKAGE"
+                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm "$package"
                 ;;
             *)
-                "$ESCALATION_TOOL" "$PACKAGER" install -y "$PACKAGE"
+                "$ESCALATION_TOOL" "$PACKAGER" install -y "$package"
                 ;;
         esac
     else
-        echo "$PACKAGE is already installed."
+        echo "$package is already installed."
     fi
-}       
+}
 
 # Function to setup and configure SSH
 setup_ssh() {
@@ -26,18 +26,18 @@ setup_ssh() {
 
     # Detect package manager and install appropriate SSH package
     case "$PACKAGER" in
-    apt-get|nala)
+        apt-get | nala)
-        install_package openssh-server
+            install_package openssh-server
-        SSH_SERVICE="ssh"
+            SSH_SERVICE="ssh"
-        ;;
+            ;;
-    pacman)
+        pacman)
-        install_package openssh
+            install_package openssh
-        SSH_SERVICE="sshd"
+            SSH_SERVICE="sshd"
-        ;;
+            ;;
-    *)
+        *)
-        install_package openssh-server
+            install_package openssh-server
-        SSH_SERVICE="sshd"
+            SSH_SERVICE="sshd"
-        ;;
+            ;;
     esac
 
     # Enable and start the appropriate SSH service
@@ -60,7 +60,7 @@ setup_ssh() {
 # Function to setup and configure Samba
 setup_samba() {
     printf "%b\n" "${YELLOW}Setting up Samba...${RC}"
-    
+
     # Install Samba if not installed
     install_package samba
 
@@ -112,7 +112,7 @@ setup_samba() {
         "$ESCALATION_TOOL" smbpasswd -a "$SAMBA_USER"
 
         # Configure Samba settings
-        "$ESCALATION_TOOL" tee "$SAMBA_CONFIG" > /dev/null <<EOL
+        "$ESCALATION_TOOL" tee "$SAMBA_CONFIG" >/dev/null <<EOL
 [global]
    workgroup = WORKGROUP
    server string = Samba Server
@@ -157,7 +157,7 @@ configure_firewall() {
     fi
 }
 
-setup_ssh_samba(){
+setup_ssh_samba() {
     printf "%b\n" "Samba and SSH Setup Script"
     printf "%b\n" "--------------------------"
     clear
@@ -171,7 +171,7 @@ setup_ssh_samba(){
     printf "%b\n" "5. Exit"
 
     printf "%b" "Enter your choice (1-5): "
-    read CHOICE
+    read -r CHOICE
 
     case "$CHOICE" in
         1)
@@ -203,4 +203,4 @@ setup_ssh_samba(){
 
 checkEnv
 checkEscalationTool
-setup_ssh_samba
+setup_ssh_samba

core/tabs/utils/service-control.sh

@@ -1,9 +1,9 @@
 #!/bin/sh -e
 
 # Load common script functions
-. ../common-script.sh  
+. ../common-script.sh
 
-#external services directory 
+#external services directory
 SCRIPT_DIR="./services"
 
 # Function to show the main menu
@@ -78,7 +78,7 @@ add_service() {
 
     # Create the service unit file
     SERVICE_FILE="/etc/systemd/system/$SERVICE_NAME.service"
-    
+
     # Create the service file with conditionals for optional fields
     {
         printf "%b\n" "[Unit]"
@@ -87,12 +87,12 @@ add_service() {
         printf "%b\n" "[Service]"
         printf "%b\n" "ExecStart=$EXEC_START"
         [ -n "$SERVICE_USER" ] && printf "%b\n" "User=$SERVICE_USER"
-        [ -n "$WORKING_DIRECTORY" ] && printf "%b\n"  "WorkingDirectory=$WORKING_DIRECTORY"
+        [ -n "$WORKING_DIRECTORY" ] && printf "%b\n" "WorkingDirectory=$WORKING_DIRECTORY"
         [ -n "$RESTART_POLICY" ] && printf "%b\n" "Restart=$RESTART_POLICY"
         printf "\n"
         printf "%b\n" "[Install]"
         printf "%b\n" "WantedBy=multi-user.target"
-    } | "$ESCALATION_TOOL" tee "$SERVICE_FILE" > /dev/null
+    } | "$ESCALATION_TOOL" tee "$SERVICE_FILE" >/dev/null
 
     # Set permissions and reload systemd
     "$ESCALATION_TOOL" chmod 644 "$SERVICE_FILE"
@@ -260,17 +260,20 @@ main() {
             6) start_service ;;
             7) stop_service ;;
             8) enable_service ;;
-            9) disable_service ;; 
+            9) disable_service ;;
             10) create_service_from_external ;;
-            11) printf "%b\n" "Exiting..."; exit 0 ;;
+            11)
+                printf "%b\n" "Exiting..."
+                exit 0
+                ;;
             *) printf "%b\n" "Invalid choice. Please try again." ;;
         esac
 
         printf "%b\n" "Press [Enter] to continue..."
-        read -r dummy
+        read -r _
     done
 }
 
 checkEnv
 checkEscalationTool
-main
+main

core/tabs/utils/ssh.sh

@@ -2,28 +2,25 @@
 
 . ../common-script.sh
 
-# Check if ~/.ssh/config exists, if not, create it
 if [ ! -f ~/.ssh/config ]; then
     mkdir -p "$HOME/.ssh"
     touch "$HOME/.ssh/config"
     chmod 600 "$HOME/.ssh/config"
 fi
 
-# Function to show available hosts from ~/.ssh/config
 show_available_hosts() {
     printf "%b\n" "Available Systems:"
     grep -E "^Host " "$HOME/.ssh/config" | awk '{print $2}'
     printf "%b\n" "-------------------"
 }
 
-# Function to ask for host details
 ask_for_host_details() {
     printf "%b" "Enter Host Alias: "
     read -r host_alias
-    printf "%b" "Enter Remote Host (hostname or IP): " 
+    printf "%b" "Enter Remote Host (hostname or IP): "
     read -r host
     printf "%b" "Enter Remote User: "
-    read -r  user
+    read -r user
     {
         printf "%b\n" "Host $host_alias"
         printf "%b\n" "    HostName $host"
@@ -31,11 +28,10 @@ ask_for_host_details() {
         printf "%b\n" "    IdentityFile ~/.ssh/id_rsa"
         printf "%b\n" "    StrictHostKeyChecking no"
         printf "%b\n" "    UserKnownHostsFile=/dev/null"
-    } >> ~/.ssh/config
+    } >>~/.ssh/config
     printf "%b\n" "Host $host_alias added successfully."
 }
 
-# Function to generate SSH key if not exists
 generate_ssh_key() {
     if [ ! -f ~/.ssh/id_rsa ]; then
         printf "%b\n" "SSH key not found, generating one..."
@@ -45,28 +41,26 @@ generate_ssh_key() {
     fi
 }
 
-# Function to share the SSH public key with the remote host
 share_ssh_key() {
-    printf "%b" "Enter the alias of the host to copy the key to: " 
+    printf "%b" "Enter the alias of the host to copy the key to: "
     read -r host_alias
     printf "%b\n" "Copying SSH key to $host_alias..."
     ssh-copy-id "$host_alias"
     printf "%b\n" "SSH key copied to $host_alias successfully."
 }
 
-# Function to disable password authentication and allow only SSH keys
-#repeated twice as changes should take place when in commented state or modified state.
 disable_password_auth() {
     printf "%b\n" "Disabling SSH password authentication and enabling key-only login..."
-    printf "%b\n" "Enter the alias of the host: " 
+    printf "%b\n" "Enter the alias of the host: "
     read -r host_alias
     printf "\n"
+    # shellcheck disable=SC2029
     ssh "$host_alias" "
-        "$ESCALATION_TOOL" -S sed -i 's/^#PasswordAuthentication yes/PasswordAuthentication no/' /etc/ssh/sshd_config &&
+        $ESCALATION_TOOL -S sed -i 's/^#PasswordAuthentication yes/PasswordAuthentication no/' /etc/ssh/sshd_config &&
-        "$ESCALATION_TOOL"  -S sed -i 's/^PasswordAuthentication yes/PasswordAuthentication no/' /etc/ssh/sshd_config &&
+        $ESCALATION_TOOL  -S sed -i 's/^PasswordAuthentication yes/PasswordAuthentication no/' /etc/ssh/sshd_config &&
-        "$ESCALATION_TOOL"  -S sed -i 's/^#PubkeyAuthentication no/PubkeyAuthentication yes/' /etc/ssh/sshd_config &&
+        $ESCALATION_TOOL  -S sed -i 's/^#PubkeyAuthentication no/PubkeyAuthentication yes/' /etc/ssh/sshd_config &&
-        "$ESCALATION_TOOL"  -S sed -i 's/^PubkeyAuthentication no/PubkeyAuthentication yes/' /etc/ssh/sshd_config &&
+        $ESCALATION_TOOL  -S sed -i 's/^PubkeyAuthentication no/PubkeyAuthentication yes/' /etc/ssh/sshd_config &&
-        "$ESCALATION_TOOL"  -S systemctl restart sshd
+        $ESCALATION_TOOL  -S systemctl restart sshd
     "
     printf "%b\n" "PasswordAuthentication set to no and PubkeyAuthentication set to yes."
 }
@@ -76,12 +70,13 @@ enable_password_auth() {
     printf "%b\n" "Enter the alias of the host: "
     read -r host_alias
     printf "\n"
+    # shellcheck disable=SC2029
     ssh "$host_alias" "
-        "$ESCALATION_TOOL"  -S sed -i 's/^#PasswordAuthentication no/PasswordAuthentication yes/' /etc/ssh/sshd_config &&
+        $ESCALATION_TOOL -S sed -i 's/^#PasswordAuthentication no/PasswordAuthentication yes/' /etc/ssh/sshd_config &&
-        "$ESCALATION_TOOL"  -S sed -i 's/^PasswordAuthentication no/PasswordAuthentication yes/' /etc/ssh/sshd_config &&
+        $ESCALATION_TOOL -S sed -i 's/^PasswordAuthentication no/PasswordAuthentication yes/' /etc/ssh/sshd_config &&
-        "$ESCALATION_TOOL"  -S sed -i 's/^#PubkeyAuthentication yes/PubkeyAuthentication no/' /etc/ssh/sshd_config &&
+        $ESCALATION_TOOL -S sed -i 's/^#PubkeyAuthentication yes/PubkeyAuthentication no/' /etc/ssh/sshd_config &&
-        "$ESCALATION_TOOL"  -S sed -i 's/^PubkeyAuthentication yes/PubkeyAuthentication no/' /etc/ssh/sshd_config &&
+        $ESCALATION_TOOL -S sed -i 's/^PubkeyAuthentication yes/PubkeyAuthentication no/' /etc/ssh/sshd_config &&
-        "$ESCALATION_TOOL"  -S systemctl restart sshd
+        $ESCALATION_TOOL -S systemctl restart sshd
     "
     printf "%b\n" "PasswordAuthentication set to yes and PubkeyAuthentication set to no."
 }
@@ -95,18 +90,19 @@ check_password_auth() {
 
 # Function to run a command on a remote server
 run_remote_command() {
-    printf "%b" "Enter the alias of the host: " 
+    printf "%b" "Enter the alias of the host: "
     read -r host_alias
-    printf "%b" "Enter the command to run: " 
+    printf "%b" "Enter the command to run: "
     read -r remote_command
+    # shellcheck disable=SC2029
     ssh "$host_alias" "$remote_command"
 }
 
 # Function to copy a file to a remote server
 copy_file_to_remote() {
-    printf "%b" "Enter the local file path: " 
+    printf "%b" "Enter the local file path: "
     read -r local_file
-    printf "%b" "Enter the alias of the host: " 
+    printf "%b" "Enter the alias of the host: "
     read -r host_alias
     printf "%b" "Enter the remote destination path: "
     read -r remote_path
@@ -116,31 +112,30 @@ copy_file_to_remote() {
 # Function to copy a directory to a remote server
 copy_directory_to_remote() {
     printf "%b" "Enter the local directory path: "
-    read -r  local_dir
+    read -r local_dir
-    printf "%b" "Enter the alias of the host: " 
+    printf "%b" "Enter the alias of the host: "
     read -r host_alias
     printf "%b" "Enter the remote destination path: "
     read -r remote_path
     scp -r "$local_dir" "$host_alias:$remote_path"
 }
 
-
 # Function to move a file to a remote server (copy and delete local)
 move_file_to_remote() {
     printf "%b" "Enter the local file path: "
     read -r local_file
     printf "%b" "Enter the alias of the host: "
     read -r host_alias
-    printf "%b" "Enter the remote destination path: " 
+    printf "%b" "Enter the remote destination path: "
     read -r remote_path
     scp "$local_file" "$host_alias:$remote_path" && rm "$local_file"
 }
 
 # Function to move a directory to a remote server (copy and delete local)
 move_directory_to_remote() {
-    printf "%b" "Enter the local directory path: " 
+    printf "%b" "Enter the local directory path: "
     read -r local_dir
-    printf "%b" "Enter the alias of the host: " 
+    printf "%b" "Enter the alias of the host: "
     read -r host_alias
     printf "%b" "Enter the remote destination path: "
     read -r remote_path
@@ -158,7 +153,7 @@ remove_system() {
 # Function to view SSH configuration
 view_ssh_config() {
     printf "%b\n" "Enter the alias of the host to view (or press Enter to view all): "
-    read -r  host_alias
+    read -r host_alias
     if [ -z "$host_alias" ]; then
         cat ~/.ssh/config
     else
@@ -179,11 +174,11 @@ backup_files() {
 
 # Function to sync directories with remote host
 sync_directories() {
-    printf "%b" "Enter the local directory path: " 
+    printf "%b" "Enter the local directory path: "
     read -r local_dir
-    printf "%b" "Enter the alias of the host: " 
+    printf "%b" "Enter the alias of the host: "
     read -r host_alias
-    printf "%b" "Enter the remote directory path: " 
+    printf "%b" "Enter the remote directory path: "
     read -r remote_dir
     rsync -avz "$local_dir" "$host_alias:$remote_dir"
 }
@@ -222,32 +217,35 @@ show_menu() {
 # Function to execute the selected SSH operation
 main() {
     while true; do
-    show_menu
+        show_menu
-    read -r choice
+        read -r choice
-    case $choice in
+        case $choice in
-        1) ask_for_host_details ;;
+            1) ask_for_host_details ;;
-        2) show_available_hosts && printf "%b" "Enter the alias of the host to connect to: " && read -r  host_alias; ssh "$host_alias" ;;
+            2)
-        3) generate_ssh_key ;;
+                show_available_hosts && printf "%b" "Enter the alias of the host to connect to: " && read -r host_alias
-        4) share_ssh_key ;;
+                ssh "$host_alias"
-        5) disable_password_auth ;;
+                ;;
-        6) enable_password_auth ;;
+            3) generate_ssh_key ;;
-        7) check_password_auth ;;
+            4) share_ssh_key ;;
-        8) check_ssh_key_authentication ;;
+            5) disable_password_auth ;;
-        9) run_remote_command ;;
+            6) enable_password_auth ;;
-        10) copy_file_to_remote ;;
+            7) check_password_auth ;;
-        11) copy_directory_to_remote ;;
+            8) check_ssh_key_authentication ;;
-        12) move_file_to_remote ;;
+            9) run_remote_command ;;
-        13) move_directory_to_remote ;;
+            10) copy_file_to_remote ;;
-        14) remove_system ;;
+            11) copy_directory_to_remote ;;
-        15) view_ssh_config ;;
+            12) move_file_to_remote ;;
-        16) backup_files ;;
+            13) move_directory_to_remote ;;
-        17) sync_directories ;;
+            14) remove_system ;;
-        18) exit ;;
+            15) view_ssh_config ;;
-        *) printf "%b\n" "Invalid choice. Please try again." ;;
+            16) backup_files ;;
-    esac
+            17) sync_directories ;;
-done
+            18) exit ;;
+            *) printf "%b\n" "Invalid choice. Please try again." ;;
+        esac
+    done
 }
 
 checkEnv
 checkEscalationTool
-main
+main

core/tabs/utils/timeshift.sh

@@ -2,7 +2,6 @@
 
 . ../common-script.sh
 
-# Function to install Timeshift
 install_timeshift() {
     clear
     printf "%b\n" "${YELLOW}Checking if Timeshift is installed...${RC}"
@@ -21,7 +20,6 @@ install_timeshift() {
     fi
 }
 
-# Function to display the menu
 display_menu() {
     clear
     printf "%b\n" "${CYAN}Timeshift CLI Automation${RC}"
@@ -34,19 +32,16 @@ display_menu() {
     printf "%b\n" "${CYAN}7) Exit${RC}"
 }
 
-# Function to list snapshots
 list_snapshots() {
     printf "%b\n" "${CYAN}Listing snapshots...${RC}"
     "$ESCALATION_TOOL" timeshift --list-snapshots
 }
 
-# Function to list devices
 list_devices() {
     printf "%b\n" "${CYAN}Listing available devices...${RC}"
     "$ESCALATION_TOOL" timeshift --list-devices
 }
 
-# Function to create a new snapshot
 create_snapshot() {
     printf "%b" "${CYAN}Enter a comment for the snapshot (optional): ${RC}"
     read -r COMMENT
@@ -64,14 +59,9 @@ create_snapshot() {
         "$ESCALATION_TOOL" timeshift --create --comments "$COMMENT" --tags "$TAG"
     fi
 
-    if [ $? -eq 0 ]; then
+    printf "%b\n" "${GREEN}Snapshot created successfully.${RC}"
-        printf "%b\n" "${GREEN}Snapshot created successfully.${RC}"
-    else
-        printf "%b\n" "${RED}Snapshot creation failed.${RC}"
-    fi
 }
 
-# Function to restore a snapshot
 restore_snapshot() {
     list_snapshots
 
@@ -90,14 +80,9 @@ restore_snapshot() {
         "$ESCALATION_TOOL" timeshift --restore --snapshot "$SNAPSHOT" --target-device "$TARGET_DEVICE" --grub-device "$GRUB_DEVICE" --yes
     fi
 
-    if [ $? -eq 0 ]; then
+    printf "%b\n" "${GREEN}Snapshot restored successfully.${RC}"
-        printf "%b\n" "${GREEN}Snapshot restored successfully.${RC}"
-    else
-        printf "%b\n" "${RED}Snapshot restore failed.${RC}"
-    fi
 }
 
-# Function to delete a snapshot
 delete_snapshot() {
     list_snapshots
 
@@ -107,14 +92,9 @@ delete_snapshot() {
     printf "%b\n" "${YELLOW}Deleting snapshot $SNAPSHOT...${RC}"
     "$ESCALATION_TOOL" timeshift --delete --snapshot "$SNAPSHOT" --yes
 
-    if [ $? -eq 0 ]; then
+    printf "%b\n" "${GREEN}Snapshot deleted successfully.${RC}"
-        printf "%b\n" "${GREEN}Snapshot deleted successfully.${RC}"
-    else
-        printf "%b\n" "${RED}Snapshot deletion failed.${RC}"
-    fi
 }
 
-# Function to delete all snapshots
 delete_all_snapshots() {
     printf "%b\n" "${RED}WARNING: This will delete all snapshots!${RC}"
     printf "%b" "${CYAN}Are you sure? (y/N): ${RC}"
@@ -123,11 +103,7 @@ delete_all_snapshots() {
     if [ "$CONFIRMATION" = "y" ] || [ "$CONFIRMATION" = "Y" ]; then
         printf "%b\n" "${CYAN}Deleting all snapshots...${RC}"
         "$ESCALATION_TOOL" timeshift --delete-all --yes
-        if [ $? -eq 0 ]; then
+        printf "%b\n" "${GREEN}All snapshots deleted successfully.${RC}"
-            printf "%b\n" "${GREEN}All snapshots deleted successfully.${RC}"
-        else
-            printf "%b\n" "${RED}Failed to delete snapshots.${RC}"
-        fi
     else
         printf "%b\n" "${RED}Operation cancelled.${RC}"
     fi
@@ -146,15 +122,18 @@ main_menu() {
             4) restore_snapshot ;;
             5) delete_snapshot ;;
             6) delete_all_snapshots ;;
-            7) printf "%b\n" "${GREEN}Exiting...${RC}"; exit 0 ;;
+            7)
+                printf "%b\n" "${GREEN}Exiting...${RC}"
+                exit 0
+                ;;
             *) printf "%b\n" "${RED}Invalid option. Please try again.${RC}" ;;
         esac
         printf "%b\n" "${CYAN}Press Enter to continue...${RC}"
-        read -r dummy
+        read -r _
     done
 }
 
 checkEnv
 checkEscalationTool
-install_timeshift  
+install_timeshift
 main_menu

core/tabs/utils/user-account-manager/add_to_group.sh

@@ -33,7 +33,7 @@ addToGroup() {
     groups_to_add=$(echo "$groups" | tr ' ' ',')
 
     printf "%b" "${YELLOW}Are you sure you want to add user $username to $groups_to_add? [Y/n]: ${RC}"
-    read -r confirm
+    read -r _
     confirmAction || exit 1
 
     "$ESCALATION_TOOL" usermod -aG "$groups_to_add" "$username"
@@ -44,4 +44,4 @@ addToGroup() {
 checkEnv
 checkEscalationTool
 checkGroups
-addToGroup
+addToGroup

core/tabs/utils/user-account-manager/add_user.sh

@@ -11,7 +11,7 @@ createUser() {
     printf "%b" "${YELLOW}Enter the username: ${RC}"
     read -r username
 
-    if ! echo "$username" | grep '^[a-zA-Z]*$' > /dev/null; then
+    if ! echo "$username" | grep '^[a-zA-Z]*$' >/dev/null; then
         printf "%b\n" "${RED}Username must only contain letters and cannot contain spaces.${RC}"
         exit 1
     fi

core/tabs/utils/user-account-manager/change_password.sh

@@ -12,12 +12,12 @@ changePassword() {
     printf "%b" "${YELLOW}Enter the username: ${RC}"
     read -r username
 
-    if id "$username" > /dev/null 2>&1; then
+    if id "$username" >/dev/null 2>&1; then
         printf "%b" "${YELLOW}Enter new password: ${RC}"
         read -r password
 
         printf "%b" "${YELLOW}Are you sure you want to change password for ""$username""? [Y/n]: ${RC}"
-        read -r confirm
+        read -r _
         confirmAction || exit 1
 
         echo "$username:$password" | "$ESCALATION_TOOL" chpasswd
@@ -30,4 +30,4 @@ changePassword() {
 
 checkEnv
 checkEscalationTool
-changePassword
+changePassword

core/tabs/utils/user-account-manager/delete_user.sh

@@ -12,12 +12,12 @@ deleteUser() {
     printf "%b" "${YELLOW}Enter the username: ${RC}"
     read -r username
 
-    if id "$username" > /dev/null 2>&1; then
+    if id "$username" >/dev/null 2>&1; then
         printf "%b" "${YELLOW}Are you sure you want to delete user ""$username""? [Y/n]: ${RC}"
-        read -r confirm
+        read -r _
         confirmAction || exit 1
 
-        $ESCALATION_TOOL userdel --remove "$username" 2>/dev/null
+        "$ESCALATION_TOOL" userdel --remove "$username" 2>/dev/null
         printf "%b\n" "${GREEN}User $username deleted successfully${RC}"
     else
         printf "%b\n" "${RED}User $username does not exist.${RC}"
@@ -27,4 +27,4 @@ deleteUser() {
 
 checkEnv
 checkEscalationTool
-deleteUser
+deleteUser

core/tabs/utils/user-account-manager/remove_from_group.sh

@@ -12,7 +12,7 @@ removeFromGroup() {
     printf "%b" "${YELLOW}Enter the username: ${RC}"
     read -r username
 
-    if ! id "$username" > /dev/null 2>&1; then
+    if ! id "$username" >/dev/null 2>&1; then
         printf "%b\n" "${RED}User $username does not exist.${RC}"
         exit 1
     fi
@@ -34,14 +34,15 @@ removeFromGroup() {
     groups_to_remove=$(echo "$groups" | tr ' ' ',')
 
     printf "%b" "${YELLOW}Are you sure you want to remove user $username from $groups_to_remove? [Y/n]: ${RC}"
-    read -r confirm
+    read -r _
     confirmAction || exit 1
 
-    $ESCALATION_TOOL usermod -rG $groups_to_remove "$username"
+    # shellcheck disable=SC2086
+    "$ESCALATION_TOOL" usermod -rG $groups_to_remove "$username"
 
     printf "%b\n" "${GREEN}User successfully removed from $groups_to_remove${RC}"
 }
 
 checkEnv
 checkEscalationTool
-removeFromGroup
+removeFromGroup

core/tabs/utils/utility_functions.sh

@@ -2,7 +2,6 @@
 
 . ../../common-script.sh
 
-# Function to check xrandr is installed
 setup_xrandr() {
     printf "%b\n" "${YELLOW}Installing xrandr...${RC}"
     if ! command_exists xrandr; then
@@ -10,7 +9,7 @@ setup_xrandr() {
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -S --noconfirm xorg-xrandr
                 ;;
-            apt-get|nala)
+            apt-get | nala)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y x11-xserver-utils
                 ;;
             *)
@@ -22,56 +21,52 @@ setup_xrandr() {
     fi
 }
 
-# Function to execute xrandr commands and handle errors
 execute_command() {
     command="$1"
     printf "Executing: %s\n" "$command"
     eval "$command" 2>&1 | tee /tmp/xrandr.log | tail -n 20
+    #shellcheck disable=SC2181
     if [ $? -ne 0 ]; then
         printf "%b\n" "${RED}An error occurred while executing the command. Check /tmp/xrandr.log for details.${RC}"
     fi
 }
 
-# Function to detect connected monitors
 detect_connected_monitors() {
     xrandr_output=$(xrandr)
     printf "%b\n" "$xrandr_output" | grep " connected" | awk '{print $1}'
 }
 
-# Function to get the current brightness for a monitor
 get_current_brightness() {
     monitor="$1"
     xrandr --verbose | grep -A 10 "^$monitor connected" | grep "Brightness:" | awk '{print $2}'
 }
 
-# Function to get resolutions for a monitor
 get_unique_resolutions() {
     monitor="$1"
     xrandr_output=$(xrandr)
     available_resolutions=$(printf "%s" "$xrandr_output" | sed -n "/$monitor connected/,/^[^ ]/p" | grep -oP '\d+x\d+' | sort -u)
-    
+
     standard_resolutions="1920x1080 1280x720 1600x900 2560x1440 3840x2160"
-    
+
     temp_file=$(mktemp)
-    printf "%s" "$available_resolutions" > "$temp_file"
+    printf "%s" "$available_resolutions" >"$temp_file"
-    
+
     filtered_standard_resolutions=$(printf "%s" "$standard_resolutions" | tr ' ' '\n' | grep -xF -f "$temp_file")
-    
+
     rm "$temp_file"
-    
+
     available_res_file=$(mktemp)
     filtered_standard_res_file=$(mktemp)
-    printf "%s" "$available_resolutions" | sort > "$available_res_file"
+    printf "%s" "$available_resolutions" | sort >"$available_res_file"
-    printf "%s" "$filtered_standard_resolutions" | sort > "$filtered_standard_res_file"
+    printf "%s" "$filtered_standard_resolutions" | sort >"$filtered_standard_res_file"
-    
+
     remaining_resolutions=$(comm -23 "$available_res_file" "$filtered_standard_res_file")
-    
+
     rm "$available_res_file" "$filtered_standard_res_file"
-    
+
     printf "%b\n" "$filtered_standard_resolutions\n$remaining_resolutions" | head -n 10
 }
 
-# Function to prompt for confirmation
 confirm_action() {
     action="$1"
     printf "%b\n" "${CYAN}$action${RC}"

core/tabs/utils/wifi-control.sh

@@ -2,7 +2,6 @@
 
 . ../common-script.sh
 
-# Function to check if NetworkManager is installed
 setupNetworkManager() {
     printf "%b\n" "${YELLOW}Installing NetworkManager...${RC}"
     if ! command_exists nmcli; then
@@ -20,19 +19,17 @@ setupNetworkManager() {
     else
         printf "%b\n" "${YELLOW}NetworkManager is already installed.${RC}"
     fi
-    
+
-    # Check if NetworkManager service is running
     if ! systemctl is-active --quiet NetworkManager; then
         printf "%b\n" "${YELLOW}NetworkManager service is not running. Starting it now...${RC}"
         "$ESCALATION_TOOL" systemctl start NetworkManager
-        
+
         if systemctl is-active --quiet NetworkManager; then
             printf "%b\n" "${GREEN}NetworkManager service started successfully.${RC}"
         fi
     fi
 }
 
-# Function to display the main menu
 main_menu() {
     while true; do
         clear
@@ -61,7 +58,6 @@ main_menu() {
     done
 }
 
-# Function to scan for WiFi networks
 scan_networks() {
     clear
     printf "%b\n" "${YELLOW}Scanning for WiFi networks...${RC}"
@@ -73,36 +69,33 @@ scan_networks() {
         echo "$networks" | awk -F: '{printf("%d. SSID: %-25s \n", NR, $1)}'
     fi
     printf "%b\n" "Press any key to return to the main menu..."
-    read -r dummy
+    read -r _
 }
 
-# Function to turn WiFi on
 wifi_on() {
     clear
     printf "%b\n" "${YELLOW}Turning WiFi on...${RC}"
-    nmcli radio wifi on && {
+    if nmcli radio wifi on; then
         printf "%b\n" "${GREEN}WiFi is now turned on.${RC}"
-    } || {
+    else
         printf "%b\n" "${RED}Failed to turn on WiFi.${RC}"
-    }
+    fi
     printf "%b\n" "Press any key to return to the main menu..."
-    read -r dummy
+    read -r _
 }
 
-# Function to turn WiFi off
 wifi_off() {
     clear
     printf "%b\n" "${YELLOW}Turning WiFi off...${RC}"
-    nmcli radio wifi off && {
+    if nmcli radio wifi off; then
         printf "%b\n" "${GREEN}WiFi is now turned off.${RC}"
-    } || {
+    else
         printf "%b\n" "${RED}Failed to turn off WiFi.${RC}"
-    }
+    fi
     printf "%b\n" "Press any key to return to the main menu..."
-    read -r dummy
+    read -r _
 }
 
-# Function to prompt for WiFi network selection
 prompt_for_network() {
     action=$1
     prompt_msg=$2
@@ -116,19 +109,19 @@ prompt_for_network() {
         if [ -z "$networks" ]; then
             printf "%b\n" "${RED}No networks available. Please scan for networks first.${RC}"
             printf "%b\n" "Press any key to return to the main menu..."
-            read -r dummy
+            read -r _
             rm -f "$temp_file"
             return
         fi
 
-        echo "$networks" > "$temp_file"
+        echo "$networks" >"$temp_file"
 
         i=1
         while IFS= read -r network; do
             ssid=$(echo "$network" | awk -F: '{print $1}')
             printf "%b\n" "$i. SSID: " "$ssid"
             i=$((i + 1))
-        done < "$temp_file"
+        done <"$temp_file"
 
         printf "%b\n" "0. Exit to main menu"
         printf "%b" "$prompt_msg"
@@ -140,40 +133,36 @@ prompt_for_network() {
                 printf "%b" "Enter password for SSID: " "$ssid"
                 read -r password
                 printf "\n"
-                nmcli dev wifi connect "$ssid" password "$password" && {
+                if nmcli dev wifi connect "$ssid" password "$password"; then
-                    printf "%b\n" "${GREEN}$success_msg${RC}"
+                    printf "%b\n" "${GREEN}${success_msg}${RC}"
-                } || {
+                else
-                    printf "%b\n" "${RED}$failure_msg${RC}"
+                    printf "%b\n" "${RED}${failure_msg}${RC}"
-                }
+                fi
             fi
         else
             printf "%b\n" "${RED}Invalid choice. Please try again.${RC}"
         fi
 
         printf "%b\n" "Press any key to return to the selection menu..."
-        read -r dummy
+        read -r _
     done
 
     rm -f "$temp_file"
 }
 
-# Function to connect to a WiFi network
 connect_network() {
     prompt_for_network "connect" "Enter the number of the network to connect: " "Connected to the network successfully." "Failed to connect to the network."
 }
 
-# Function to disconnect from a WiFi network
 disconnect_network() {
     prompt_for_network "disconnect" "Enter the number of the network to disconnect: " "Disconnected from the network successfully." "Failed to disconnect from the network."
 }
 
-# Function to remove a WiFi connection
 remove_network() {
     prompt_for_network "remove" "Enter the number of the network to remove: " "Network removed successfully." "Failed to remove the network."
 }
 
-# Initialize
 checkEnv
 checkEscalationTool
 setupNetworkManager
-main_menu
+main_menu

start.sh

@@ -2,50 +2,50 @@
 
 # Prevent execution if this script was only partially downloaded
 {
-rc='\033[0m'
+    rc='\033[0m'
-red='\033[0;31m'
+    red='\033[0;31m'
 
-check() {
+    check() {
-    exit_code=$1
+        exit_code=$1
-    message=$2
+        message=$2
 
-    if [ "$exit_code" -ne 0 ]; then
+        if [ "$exit_code" -ne 0 ]; then
-        printf '%sERROR: %s%s\n' "$red" "$message" "$rc"
+            printf '%sERROR: %s%s\n' "$red" "$message" "$rc"
-        exit 1
+            exit 1
-    fi
+        fi
 
-    unset exit_code
+        unset exit_code
-    unset message
+        unset message
-}
+    }
 
-findArch() {
+    findArch() {
-    case "$(uname -m)" in
+        case "$(uname -m)" in
-        x86_64|amd64) arch="x86_64" ;;
+            x86_64 | amd64) arch="x86_64" ;;
-        aarch64|arm64) arch="aarch64" ;;
+            aarch64 | arm64) arch="aarch64" ;;
-        *) check 1 "Unsupported architecture"
+            *) check 1 "Unsupported architecture" ;;
-    esac
+        esac
-}
+    }
 
-getUrl() {
+    getUrl() {
-    case "${arch}" in
+        case "${arch}" in
-        x86_64) echo "https://github.com/ChrisTitusTech/linutil/releases/latest/download/linutil";;
+            x86_64) echo "https://github.com/ChrisTitusTech/linutil/releases/latest/download/linutil" ;;
-        *) echo "https://github.com/ChrisTitusTech/linutil/releases/latest/download/linutil-${arch}";;
+            *) echo "https://github.com/ChrisTitusTech/linutil/releases/latest/download/linutil-${arch}" ;;
-    esac
+        esac
-}
+    }
 
-findArch
+    findArch
-temp_file=$(mktemp)
+    temp_file=$(mktemp)
-check $? "Creating the temporary file"
+    check $? "Creating the temporary file"
 
-curl -fsL "$(getUrl)" -o "$temp_file"
+    curl -fsL "$(getUrl)" -o "$temp_file"
-check $? "Downloading linutil"
+    check $? "Downloading linutil"
 
-chmod +x "$temp_file"
+    chmod +x "$temp_file"
-check $? "Making linutil executable"
+    check $? "Making linutil executable"
 
-"$temp_file"
+    "$temp_file"
-check $? "Executing linutil"
+    check $? "Executing linutil"
 
-rm -f "$temp_file"
+    rm -f "$temp_file"
-check $? "Deleting the temporary file"
+    check $? "Deleting the temporary file"
 } # End of wrapping

startdev.sh

@@ -2,76 +2,76 @@
 
 # Prevent execution if this script was only partially downloaded
 {
-RC='\033[0m'
+    RC='\033[0m'
-RED='\033[0;31m'
+    RED='\033[0;31m'
 
-# Function to fetch the latest release tag from the GitHub API
+    # Function to fetch the latest release tag from the GitHub API
-get_latest_release() {
+    get_latest_release() {
-  latest_release=$(curl -s https://api.github.com/repos/ChrisTitusTech/linutil/releases | 
+        latest_release=$(curl -s https://api.github.com/repos/ChrisTitusTech/linutil/releases |
-    grep -oP '"tag_name": "\K[^"]*' | 
+            grep -oP '"tag_name": "\K[^"]*' |
-    head -n 1)
+            head -n 1)
-  if [ -z "$latest_release" ]; then
+        if [ -z "$latest_release" ]; then
-    printf "%b\n" "Error fetching release data" >&2
+            printf "%b\n" "Error fetching release data" >&2
-    return 1
+            return 1
-  fi
+        fi
-  printf "%b\n" "$latest_release"
+        printf "%b\n" "$latest_release"
-}
+    }
 
-# Function to redirect to the latest pre-release version
+    # Function to redirect to the latest pre-release version
-redirect_to_latest_pre_release() {
+    redirect_to_latest_pre_release() {
-  latest_release=$(get_latest_release)
+        latest_release=$(get_latest_release)
-  if [ -n "$latest_release" ]; then
+        if [ -n "$latest_release" ]; then
-    url="https://github.com/ChrisTitusTech/linutil/releases/download/$latest_release/linutil"
+            url="https://github.com/ChrisTitusTech/linutil/releases/download/$latest_release/linutil"
-  else
+        else
-    printf "%b\n" 'Unable to determine latest pre-release version.' >&2
+            printf "%b\n" 'Unable to determine latest pre-release version.' >&2
-    printf "%b\n" "Using latest Full Release"
+            printf "%b\n" "Using latest Full Release"
-    url="https://github.com/ChrisTitusTech/linutil/releases/latest/download/linutil"
+            url="https://github.com/ChrisTitusTech/linutil/releases/latest/download/linutil"
-  fi
+        fi
-  addArch
+        addArch
-  printf "%b\n" "Using URL: $url"
+        printf "%b\n" "Using URL: $url"
-}
+    }
 
-check() {
+    check() {
-    exit_code=$1
+        exit_code=$1
-    message=$2
+        message=$2
 
-    if [ "$exit_code" -ne 0 ]; then
+        if [ "$exit_code" -ne 0 ]; then
-        printf "%b\n" "${RED}ERROR: $message${RC}"
+            printf "%b\n" "${RED}ERROR: $message${RC}"
-        exit 1
+            exit 1
-    fi
+        fi
-}
+    }
 
-addArch() {
+    addArch() {
-    case "${arch}" in
+        case "${arch}" in
-        x86_64);;
+            x86_64) ;;
-        *) url="${url}-${arch}";;
+            *) url="${url}-${arch}" ;;
-    esac
+        esac
-}
+    }
 
-findArch() {
+    findArch() {
-    case "$(uname -m)" in
+        case "$(uname -m)" in
-        x86_64|amd64) arch="x86_64" ;;
+            x86_64 | amd64) arch="x86_64" ;;
-        aarch64|arm64) arch="aarch64" ;;
+            aarch64 | arm64) arch="aarch64" ;;
-        *) check 1 "Unsupported architecture"
+            *) check 1 "Unsupported architecture" ;;
-    esac
+        esac
-}
+    }
 
-findArch
+    findArch
-redirect_to_latest_pre_release
+    redirect_to_latest_pre_release
 
-TMPFILE=$(mktemp)
+    TMPFILE=$(mktemp)
-check $? "Creating the temporary file"
+    check $? "Creating the temporary file"
 
-printf "%b\n" "Downloading linutil from $url"
+    printf "%b\n" "Downloading linutil from $url"
-curl -fsL "$url" -o "$TMPFILE"
+    curl -fsL "$url" -o "$TMPFILE"
-check $? "Downloading linutil"
+    check $? "Downloading linutil"
 
-chmod +x "$TMPFILE"
+    chmod +x "$TMPFILE"
-check $? "Making linutil executable"
+    check $? "Making linutil executable"
 
-"$TMPFILE"
+    "$TMPFILE"
-check $? "Executing linutil"
+    check $? "Executing linutil"
 
-rm -f "$TMPFILE"
+    rm -f "$TMPFILE"
-check $? "Deleting the temporary file"
+    check $? "Deleting the temporary file"
 } # End of wrapping