Merge branch 'main' into linux_neptune

* Btrfs Assistant(+snapper), grub-btrfs Setup added

Adds fedora-btrfs-assistant.sh, updates tab_data and documentation.

* updated doc, ta_data and sh

* enable grub-btrfsd service added

* updated some wording in notices.

* updated wording and add prompts for actions

* added fix for a possible grub error

also some more enhancements and wording improvements.

* user action removed

reinstall snapper action removed because removing and reinstalling snapper is a very unlikely action. and also snapper can't handle ./snapsots folder in the disk after reinstalling: "creating btrfs subvolume .snapshots failed since it already exists".

* firs snapshot order changed

home snapshot taken first because it's config can be saved to first root snapshot.

* better explanations in user prompts

* improved y/n loop

* formatting improvements

* formatting improvement

Co-authored-by: Adam Perkowski <adas1per@protonmail.com>

* formatting improvement

Co-authored-by: Adam Perkowski <adas1per@protonmail.com>

* Update task list

Co-authored-by: Adam Perkowski <adas1per@protonmail.com>

* removed a inline comment

Co-authored-by: Adam Perkowski <adas1per@protonmail.com>

* removed an unnececary inline comment

Co-authored-by: Adam Perkowski <adas1per@protonmail.com>

* removed an unnececary inline comment

Co-authored-by: Adam Perkowski <adas1per@protonmail.com>

* improved sed -i

Co-authored-by: Adam Perkowski <adas1per@protonmail.com>

* improved sed -i

Co-authored-by: Adam Perkowski <adas1per@protonmail.com>

* improved sed -i

Co-authored-by: Adam Perkowski <adas1per@protonmail.com>

* newlines removed from tab_data.toml

Co-authored-by: Nyx <nnyyxxxx@protonmail.com>

* btrfs detection moved to toml

Co-authored-by: Nyx <nnyyxxxx@protonmail.com>

* data.preconditions added - escalation tool used

* $PACKAGER replaced with dnf

* re-added packager

Co-authored-by: Adam Perkowski <adas1per@protonmail.com>

* re-added packager

Co-authored-by: Adam Perkowski <adas1per@protonmail.com>

* usergide updated with docgen

* typo fix

---------

Co-authored-by: Adam Perkowski <adas1per@protonmail.com>
Co-authored-by: Nyx <nnyyxxxx@protonmail.com>

.github/SECURITY.md

@@ -2,13 +2,20 @@
 
 ## Supported Versions
 
-It is recommended that you run the stable version as this is more tested and used by most. The dev branch is bleed-edge commits that are not well tested and aren't meant to be used in production environments
+It is recommended that you use the stable branch as it's tested and used by most. The dev branch may contain bleeding-edge commits that are not well tested and are not meant to be used in production environments.<br>
+Version tags lower than the [latest stable release](https://github.com/ChrisTitusTech/linutil/releases/latest) are **not** supported.
 
-| Version | Supported          |
-| ------- | ------------------ |
-| latest  | :white_check_mark: |
-| dev     | :x:                |
+| Branch  | Supported              |
+| ------- | ---------------------- |
+| Stable  | :white_check_mark: YES |
+| Dev     | :x:                 NO |
+
+| Version                                            | Supported              |
+| -------------------------------------------------- | ---------------------- |
+| [![LATEST](https://img.shields.io/github/v/release/ChrisTitusTech/linutil?color=%230567ff&label=Latest&style=for-the-badge)](https://github.com/ChrisTitusTech/linutil/releases/latest) | :white_check_mark: YES |
+| Below LATEST                                       | :x:                 NO |
+| Above LATEST                                       | :x:                 NO |
 
 ## Reporting a Vulnerability
 
-I'd recommend making an Issue for reporting a bug. If you would like privately submit the bug you can email me at contact@christitus.com
+If you have any reason to believe there are security vulnerabilities in Linutil, fill out the [report form](https://github.com/christitustech/linutil/security/advisories/new) or e-mail [contact@christitus.com](mailto:contact@christitus.com).

.github/release.yml

@@ -2,19 +2,34 @@ changelog:
   categories:
     - title: '🚀 Features'
       labels:
-        - 'feature'
         - 'enhancement'
     - title: '🐛 Bug Fixes'
       labels:
-        - 'fix'
-        - 'bugfix'
         - 'bug'
+    - title: '⚙️ Refactoring'
+      labels:
+        - 'refactor'
+    - title: '🧩 UI/UX'
+      labels:
+        - 'UI/UX'
     - title: '📚 Documentation'
-      label: 'documentation'
+      labels:
+        - 'documentation'
     - title: '🔒 Security'
-      label: 'security'
+      labels:
+        - 'security'
     - title: '🧰 GitHub Actions'
-      label: 'github actions'
+      labels:
+        - 'github_actions'
+    - title: '🦀 Rust'
+      labels:
+        - 'rust'
+    - title: '📃 Scripting'
+      labels:
+        - 'script'
+    - title: 'Other Changes'
+      labels:
+        - "*"
   exclude:
     labels:
       - 'skip-changelog'

.github/workflows/bashisms.yml

@@ -3,7 +3,7 @@ name: Check for bashisms
 on:
   pull_request:
     paths:
-      - core/tabs/**
+      - 'core/tabs/**/*.sh'
   merge_group:
   workflow_dispatch:
 
@@ -15,31 +15,33 @@ jobs:
       - uses: actions/checkout@v4
       - run: git fetch origin ${{ github.base_ref }}
 
-      - name: Get a list of changed script files
-        id: get_sh_files
+      - name: Install devscripts
+        run: sudo apt-get update && sudo apt-get install -y devscripts
+
+      - name: Get changed .sh files (PR only)
+        id: changed-sh-files
+        if: github.event_name == 'pull_request'
+        uses: tj-actions/changed-files@v45
+        with:
+          files: '**/*.sh'
+
+      - name: Get all .sh files (if workflow dispatched)
+        id: sh-files
+        if: github.event_name != 'pull_request'
         run: |
-          sh_files=$(git diff --name-only origin/${{ github.base_ref }} HEAD core/tabs | grep '\.sh$' || true)
-          if [ -n "$sh_files" ]; then
-            echo "$sh_files" > changed_files
-            echo "changed=1" >> $GITHUB_OUTPUT
+          files=$(find . -type f -name "*.sh" | tr '\n' ' ')
+          echo "files=${files:-none}" >> $GITHUB_ENV
+
+      - name: Set FILES for bashism check
+        id: set-files
+        run: |
+          if [[ "${{ steps.changed-sh-files.outputs.any_changed }}" == 'true' ]]; then
+            echo "FILES=${{ steps.changed-sh-files.outputs.all_changed_files }}" >> $GITHUB_ENV
           else
-            echo "changed=0" >> $GITHUB_OUTPUT
+            echo "FILES=${{ env.files }}" >> $GITHUB_ENV
           fi
 
-      - name: Install devscripts
-        if: steps.get_sh_files.outputs.changed == 1
-        run: sudo apt-get update && sudo apt-get install devscripts
-
       - name: Check for bashisms
-        if: steps.get_sh_files.outputs.changed == 1
         run: |
-          echo "Running for:\n$(cat changed_files)\n"
-          for file in $(cat changed_files); do
-            if [[ -f "$file" ]]; then
-              checkbashisms "$file"
-            fi
-          done
-
-      - name: Remove the created file
-        if: steps.get_sh_files.outputs.changed == 1
-        run: rm changed_files
+          IFS=' ' read -r -a file_array <<< "$FILES"
+          checkbashisms "${file_array[@]}"

.github/workflows/github-pages.yml

@@ -13,6 +13,10 @@ on:
 jobs:
   build-and-deploy:
     runs-on: ubuntu-latest
+    environment: linutil_env
+    permissions:
+      contents: write
+      pull-requests: write
 
     steps:
       - name: Checkout Repository
@@ -24,11 +28,17 @@ jobs:
         run: |
           echo -e "<!-- THIS FILE IS GENERATED AUTOMATICALLY. EDIT .github/CONTRIBUTING.md -->\n\n$(cat .github/CONTRIBUTING.md)" > 'docs/contributing.md'
 
-      - uses: stefanzweifel/git-auto-commit-action@v5
+      - name: Create Pull Request
+        uses: peter-evans/create-pull-request@v6
         with:
-          commit_message: Commit Contributing Guidelines
-          file_pattern: "docs/contributing.md"
-          add_options: '--force'
+          commit-message: Update Contributing Guidelines
+          title: 'docs: Update Contributing Guidelines'
+          body: 'Automated update of Contributing Guidelines from .github/CONTRIBUTING.md'
+          branch: update-contributing-guidelines
+          delete-branch: true
+          base: main
+          labels: documentation
+          token: ${{ secrets.PAT_TOKEN }}
         if: success()
 
       - name: Setup Python

.github/workflows/linutil.yml

@@ -46,19 +46,9 @@ jobs:
         run: cargo build --target-dir=build --release --verbose --target=x86_64-unknown-linux-musl --all-features
 
       - name: Build aarch64 binary
-        run: cross build --target-dir=build --release --verbose --target=aarch64-unknown-linux-musl --all-features
-
-      - name: Move binaries to build directory
         run: |
-          mv build/x86_64-unknown-linux-musl/release/linutil build/linutil
-          mv build/aarch64-unknown-linux-musl/release/linutil build/linutil-aarch64
-
-      - uses: stefanzweifel/git-auto-commit-action@v5
-        with:
-          commit_message: Commit Linutil
-          file_pattern: "build/linutil build/linutil-aarch64"
-          add_options: '--force'
-        if: success()
+          cross build --target-dir=build --release --verbose --target=aarch64-unknown-linux-musl --all-features
+          mv ./build/aarch64-unknown-linux-musl/release/linutil ./build/aarch64-unknown-linux-musl/release/linutil-aarch64
 
       - name: Extract Version
         id: extract_version
@@ -80,32 +70,11 @@ jobs:
           append_body: true
           generate_release_notes: true
           files: |
-            ./build/linutil
-            ./build/linutil-aarch64
+            ./build/x86_64-unknown-linux-musl/release/linutil
+            ./build/aarch64-unknown-linux-musl/release/linutil-aarch64
             ./start.sh
             ./startdev.sh
           prerelease: true
         env:
           version: ${{ env.version }}
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Setup Preview
-        run: |
-          echo "$(pwd)/build" >> $GITHUB_PATH
-      
-      - name: Generate preview 
-        uses: charmbracelet/vhs-action@v2.1.0
-        with:
-          path: "docs/assets/preview.tape"
-
-      - name: Move preview
-        run: |
-          mv preview.gif docs/assets/preview.gif
-
-      - name: Upload preview
-        uses: stefanzweifel/git-auto-commit-action@v5
-        with:
-          commit_message: Preview for ${{ env.version }}
-          file_pattern: "docs/assets/preview.gif"
-          add_options: "--force"
-        if: success()

.github/workflows/preview.yml

@@ -0,0 +1,78 @@
+name: LinUtil Preview
+
+on:
+  workflow_dispatch:
+    inputs:
+        tag_name:
+          description: 'Tag name'
+          required: true
+  workflow_run:
+    workflows: ["LinUtil Release"]
+    types:
+      - completed
+
+jobs:
+  generate_preview:
+    runs-on: ubuntu-latest
+    environment: linutil_env
+    permissions:
+      contents: write
+      pull-requests: write
+
+    steps:
+      - name: Checkout source
+        uses: actions/checkout@v4
+
+      - name: Get tag name ( Workflow Run )
+        id: latest_tag
+        uses: actions/github-script@v7
+        if: github.event_name == 'workflow_run'
+        with:
+          script: |
+            const releases = await github.rest.repos.listReleases({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              per_page: 1
+            });
+            core.setOutput('result', releases.data[0].tag_name);
+          result-encoding: string
+
+      - name: Set tag name ( Workflow Run )
+        if: github.event_name == 'workflow_run'
+        run: echo "tag_name=${{ steps.latest_tag.outputs.result }}" >> $GITHUB_ENV
+
+      - name: Set tag name ( Workflow Dispatch )
+        if: ${{ github.event_name }} == 'workflow_dispatch'
+        run: echo "tag_name=${{ github.event.inputs.tag_name }}" >> $GITHUB_ENV
+
+      - name: Download binary
+        run: |
+          curl -LO "https://github.com/${{ github.repository }}/releases/download/${{ env.tag_name }}/linutil"
+
+      - name: Set env
+        run: |
+          chmod +x linutil
+          mkdir -p build
+          mv linutil build/linutil
+          echo "${{ github.workspace }}/build" >> $GITHUB_PATH
+
+      - name: Generate preview
+        uses: charmbracelet/vhs-action@v2.1.0
+        with:
+          path: "docs/assets/preview.tape"
+
+      - name: Move preview
+        run: mv preview.gif docs/assets/preview.gif
+
+      - name: Create PR
+        uses: peter-evans/create-pull-request@v7.0.5
+        with:
+          commit-message: Preview for ${{ env.tag_name }}
+          file-pattern: "docs/assets/preview.gif"
+          add-options: "--force"
+          token: ${{ secrets.PAT_TOKEN }}
+          branch: feature/preview-${{ env.tag_name }}
+          title: "Update preview for ${{ env.tag_name }}"
+          body: |
+            Automated PR to update preview gif for version ${{ env.tag_name }}
+        if: success()

.github/workflows/rust.yml

@@ -5,7 +5,7 @@ on:
     branches: ["main"]
     paths:
       - '**/*.rs'
-      - 'Cargo.toml'
+      - '**/Cargo.toml'
       - 'Cargo.lock'
 
 env:

.github/workflows/shellcheck.yml

@@ -1,9 +1,9 @@
-name: ShellCheck
+name: Script Checks
 
 on:
   pull_request:
     paths:
-      - 'core/tabs/**/*.sh'
+      - '**/*.sh'
   workflow_dispatch:
 
 jobs:
@@ -11,45 +11,25 @@ jobs:
     name: Shellcheck
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
-      - run: git fetch origin ${{ github.base_ref }}
+      - name: Checkout sources
+        uses: actions/checkout@v4
 
-      - name: Download, setup, and run ShellCheck
-        shell: bash {0}
-        run : |
-          SC_URL="https://github.com/koalaman/shellcheck/releases/download/v0.10.0/shellcheck-v0.10.0.linux.x86_64.tar.xz"
-          curl -fsSL "$SC_URL" | tar -Jx
-          chmod +x "./shellcheck-v0.10.0/shellcheck"
+      - name: Run ShellCheck
+        uses: reviewdog/action-shellcheck@v1
+        with:
+          shellcheck_flags: '--source-path=${{ github.workspace }}/.shellcheckrc'
+          reviewdog_flags: '-fail-level=any'
 
-          error=0
-          files_to_check=$(git diff --name-only origin/${{ github.base_ref }} HEAD core/tabs)
+  shfmt:
+    name: Shell Fomatting
+    runs-on: ubuntu-latest
+    needs: shellcheck
+    steps:
+      - name: Checkout sources
+        uses: actions/checkout@v4
 
-          for file in $files_to_check; do
-              if [[ "$file" == *.sh ]] && [[ -f "$file" ]]; then
-                  sc_output=$(./shellcheck-v0.10.0/shellcheck -fgcc -Serror "$file")
-                  iter_safe_parsed_errors=$(echo -e "$sc_output" | sed -n 's/\(.\+\)\:\([0-9]\+\)\:\([0-9]\+\)\: \(.*\)/::error file=\1,line=\2,col=\3::\4/p' | sed 's/ /:space:/g')
-
-                  for error in $iter_safe_parsed_errors; do
-                      echo "$error" | sed 's/:space:/ /g'
-                      error=1
-                  done
-
-                  tabs_detected=$(grep -nP '^\t+\S+' "$file")
-
-                  # fast fail on the action runner would fail immediately if there weren't any tabs found
-                  # this check makes sure that we don't continue if there's something really weird going on
-                  if [ "$?" = "2" ]; then
-                      echo "::error file=$file::There was a critical error while grepping $file, aborting"
-                      exit 1
-                  fi
-
-                  iter_safe_parsed_tabs_detected=$(echo "$tabs_detected" | sed -n 's,\([0-9]\+\).*,::error file='"$file"'\,line=\1::Found tab indentations,p' | sed 's/ /:space:/g')
-
-                  for error in $iter_safe_parsed_tabs_detected; do
-                      echo "$error" | sed 's/:space:/ /g'
-                      error=1
-                  done
-              fi
-          done
-
-          exit $error
+      - name: Run shfmt
+        uses: reviewdog/action-shfmt@v1
+        with:
+          shfmt_flags: '-i 4 -ci'
+          reviewdog_flags: '-fail-level=any'

.github/workflows/typos.yml

@@ -12,4 +12,4 @@ jobs:
       - run: git fetch origin ${{ github.base_ref }}
 
       - name: Run spellcheck
-        uses: crate-ci/typos@v1.25.0
+        uses: crate-ci/typos@v1.26.0

.shellcheckrc

@@ -0,0 +1,2 @@
+external-sources=true
+source=core/tabs/common-script.sh

Cargo.lock

@@ -29,26 +29,11 @@ version = "0.2.18"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "5c6cb57a04249c6480766f7f7cef5467412af1490f8d1e243141daddada3264f"
 
-[[package]]
-name = "android-tzdata"
-version = "0.1.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e999941b234f3131b00bc13c22d06e8c5ff726d1b6318ac7eb276997bbb4fef0"
-
-[[package]]
-name = "android_system_properties"
-version = "0.1.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "819e7219dbd41043ac279b19830f2efc897156490d7fd6ea916720117ee66311"
-dependencies = [
- "libc",
-]
-
 [[package]]
 name = "ansi-to-tui"
-version = "6.0.0"
+version = "7.0.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "00c4af0bef1b514c9b6a32a773caf604c1390fa7913f4eaa23bfe76f251d6a42"
+checksum = "67555e1f1ece39d737e28c8a017721287753af3f93225e4a445b29ccb0f5912c"
 dependencies = [
  "nom",
  "ratatui",
@@ -136,12 +121,6 @@ version = "2.6.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "b048fb63fd8b5923fc5aa7b340d8e156aec7ec02f0c78fa8a6ddc2613f6f71de"
 
-[[package]]
-name = "bumpalo"
-version = "3.16.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "79296716171880943b8470b5f8d03aa55eb2e645a4874bdbb28adb49162e012c"
-
 [[package]]
 name = "byteorder"
 version = "1.5.0"
@@ -178,25 +157,11 @@ version = "1.0.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "baf1de4339761588bc0619e3cbc0120ee582ebb74b53b4efbf79117bd2da40fd"
 
-[[package]]
-name = "chrono"
-version = "0.4.38"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a21f936df1771bf62b77f047b726c4625ff2e8aa607c01ec06e5a05bd8463401"
-dependencies = [
- "android-tzdata",
- "iana-time-zone",
- "js-sys",
- "num-traits",
- "wasm-bindgen",
- "windows-targets",
-]
-
 [[package]]
 name = "clap"
-version = "4.5.19"
+version = "4.5.20"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7be5744db7978a28d9df86a214130d106a89ce49644cbc4e3f0c22c3fba30615"
+checksum = "b97f376d85a664d5837dbae44bf546e6477a679ff6610010f17276f686d867e8"
 dependencies = [
  "clap_builder",
  "clap_derive",
@@ -204,9 +169,9 @@ dependencies = [
 
 [[package]]
 name = "clap_builder"
-version = "4.5.19"
+version = "4.5.20"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a5fbc17d3ef8278f55b282b2a2e75ae6f6c7d4bb70ed3d0382375104bfafdb4b"
+checksum = "19bc80abd44e4bed93ca373a0704ccbd1b710dc5749406201bb018272808dc54"
 dependencies = [
  "anstream",
  "anstyle",
@@ -252,12 +217,6 @@ dependencies = [
  "static_assertions",
 ]
 
-[[package]]
-name = "core-foundation-sys"
-version = "0.8.7"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "773648b94d0e5d620f64f280777445740e61fe701025087ec8b57f45c791888b"
-
 [[package]]
 name = "crossterm"
 version = "0.28.1"
@@ -370,29 +329,6 @@ dependencies = [
  "windows-sys",
 ]
 
-[[package]]
-name = "iana-time-zone"
-version = "0.1.60"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e7ffbb5a1b541ea2561f8c41c087286cc091e21e556a4f09a8f6cbf17b69b141"
-dependencies = [
- "android_system_properties",
- "core-foundation-sys",
- "iana-time-zone-haiku",
- "js-sys",
- "wasm-bindgen",
- "windows-core",
-]
-
-[[package]]
-name = "iana-time-zone-haiku"
-version = "0.1.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f31827a206f56af32e590ba56d5d2d085f558508192593743f16b2306495269f"
-dependencies = [
- "cc",
-]
-
 [[package]]
 name = "include_dir"
 version = "0.7.4"
@@ -422,6 +358,12 @@ dependencies = [
  "hashbrown",
 ]
 
+[[package]]
+name = "indoc"
+version = "2.0.5"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "b248f5224d1d606005e02c97f5aa4e88eeb230488bcc03bc9ca4d7991399f2b5"
+
 [[package]]
 name = "instability"
 version = "0.3.2"
@@ -462,15 +404,6 @@ version = "1.0.11"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "49f1f14873335454500d59611f1cf4a4b0f786f9ac11f4312a78e4cf2566695b"
 
-[[package]]
-name = "js-sys"
-version = "0.3.70"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1868808506b929d7b0cfa8f75951347aa71bb21144b7791bae35d9bccfcfe37a"
-dependencies = [
- "wasm-bindgen",
-]
-
 [[package]]
 name = "lazy_static"
 version = "1.5.0"
@@ -501,7 +434,6 @@ version = "24.9.28"
 dependencies = [
  "ansi-to-tui",
  "anstyle",
- "chrono",
  "clap",
  "crossterm",
  "ego-tree",
@@ -511,6 +443,7 @@ dependencies = [
  "rand",
  "ratatui",
  "temp-dir",
+ "textwrap",
  "tree-sitter-bash",
  "tree-sitter-highlight",
  "tui-term",
@@ -607,15 +540,6 @@ dependencies = [
  "minimal-lexical",
 ]
 
-[[package]]
-name = "num-traits"
-version = "0.2.19"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "071dfc062690e90b734c0b2273ce72ad0ffa95f0c74596bc250dcfd960262841"
-dependencies = [
- "autocfg",
-]
-
 [[package]]
 name = "once_cell"
 version = "1.19.0"
@@ -743,23 +667,23 @@ dependencies = [
 
 [[package]]
 name = "ratatui"
-version = "0.28.1"
+version = "0.29.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "fdef7f9be5c0122f890d58bdf4d964349ba6a6161f705907526d891efabba57d"
+checksum = "eabd94c2f37801c20583fc49dd5cd6b0ba68c716787c2dd6ed18571e1e63117b"
 dependencies = [
  "bitflags 2.6.0",
  "cassowary",
  "compact_str",
  "crossterm",
+ "indoc",
  "instability",
  "itertools",
  "lru",
  "paste",
  "strum",
- "strum_macros",
  "unicode-segmentation",
  "unicode-truncate",
- "unicode-width 0.1.14",
+ "unicode-width 0.2.0",
 ]
 
 [[package]]
@@ -966,6 +890,12 @@ version = "1.13.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "3c5e1a9a646d36c3599cd173a41282daf47c44583ad367b8e6837255952e5c67"
 
+[[package]]
+name = "smawk"
+version = "0.3.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "b7c388c1b5e93756d0c740965c41e8822f866621d41acbdf6336a6a168f8840c"
+
 [[package]]
 name = "static_assertions"
 version = "1.1.0"
@@ -1032,6 +962,17 @@ dependencies = [
  "libc",
 ]
 
+[[package]]
+name = "textwrap"
+version = "0.16.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "23d434d3f8967a09480fb04132ebe0a3e088c173e6d0ee7897abbdf4eab0f8b9"
+dependencies = [
+ "smawk",
+ "unicode-linebreak",
+ "unicode-width 0.1.14",
+]
+
 [[package]]
 name = "thiserror"
 version = "1.0.64"
@@ -1088,9 +1029,9 @@ dependencies = [
 
 [[package]]
 name = "tree-sitter"
-version = "0.24.2"
+version = "0.24.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "23b84f60031bf8245b563a80c92c1034e557a914f7958f474bc0afa2eed78b98"
+checksum = "f9871f16d6cf5c4757dcf30d5d2172a2df6987c510c017bbb7abfb7f9aa24d06"
 dependencies = [
  "cc",
  "regex",
@@ -1111,9 +1052,9 @@ dependencies = [
 
 [[package]]
 name = "tree-sitter-highlight"
-version = "0.24.2"
+version = "0.24.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5c727fb31f816c09fc54dc0e971d101318926866f7261b2acb820e84a61bf52d"
+checksum = "48859aa39513716018d81904220960f415dbb72e071234a721304d20bf245e4c"
 dependencies = [
  "lazy_static",
  "regex",
@@ -1130,9 +1071,9 @@ checksum = "2545046bd1473dac6c626659cc2567c6c0ff302fc8b84a56c4243378276f7f57"
 
 [[package]]
 name = "tui-term"
-version = "0.1.13"
+version = "0.2.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d07f0233f0d4795d2dc6663cfc3ce56b87bebcee66d6bcc088aa6aff5c072361"
+checksum = "72af159125ce32b02ceaced6cffae6394b0e6b6dfd4dc164a6c59a2db9b3c0b0"
 dependencies = [
  "ratatui",
  "vt100",
@@ -1144,6 +1085,12 @@ version = "1.0.13"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "e91b56cd4cadaeb79bbf1a5645f6b4f8dc5bde8834ad5894a8db35fda9efa1fe"
 
+[[package]]
+name = "unicode-linebreak"
+version = "0.1.5"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "3b09c83c3c29d37506a3e260c08c03743a6bb66a9cd432c6934ab501a190571f"
+
 [[package]]
 name = "unicode-segmentation"
 version = "1.11.0"
@@ -1223,61 +1170,6 @@ version = "0.11.0+wasi-snapshot-preview1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "9c8d87e72b64a3b4db28d11ce29237c246188f4f51057d65a7eab63b7987e423"
 
-[[package]]
-name = "wasm-bindgen"
-version = "0.2.93"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a82edfc16a6c469f5f44dc7b571814045d60404b55a0ee849f9bcfa2e63dd9b5"
-dependencies = [
- "cfg-if",
- "once_cell",
- "wasm-bindgen-macro",
-]
-
-[[package]]
-name = "wasm-bindgen-backend"
-version = "0.2.93"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9de396da306523044d3302746f1208fa71d7532227f15e347e2d93e4145dd77b"
-dependencies = [
- "bumpalo",
- "log",
- "once_cell",
- "proc-macro2",
- "quote",
- "syn",
- "wasm-bindgen-shared",
-]
-
-[[package]]
-name = "wasm-bindgen-macro"
-version = "0.2.93"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "585c4c91a46b072c92e908d99cb1dcdf95c5218eeb6f3bf1efa991ee7a68cccf"
-dependencies = [
- "quote",
- "wasm-bindgen-macro-support",
-]
-
-[[package]]
-name = "wasm-bindgen-macro-support"
-version = "0.2.93"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "afc340c74d9005395cf9dd098506f7f44e38f2b4a21c6aaacf9a105ea5e1e836"
-dependencies = [
- "proc-macro2",
- "quote",
- "syn",
- "wasm-bindgen-backend",
- "wasm-bindgen-shared",
-]
-
-[[package]]
-name = "wasm-bindgen-shared"
-version = "0.2.93"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c62a0a307cb4a311d3a07867860911ca130c3494e8c2719593806c08bc5d0484"
-
 [[package]]
 name = "which"
 version = "6.0.3"
@@ -1312,15 +1204,6 @@ version = "0.4.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "712e227841d057c1ee1cd2fb22fa7e5a5461ae8e48fa2ca79ec42cfc1931183f"
 
-[[package]]
-name = "windows-core"
-version = "0.52.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "33ab640c8d7e35bf8ba19b884ba838ceb4fba93a4e8c65a9059d08afcfc683d9"
-dependencies = [
- "windows-targets",
-]
-
 [[package]]
 name = "windows-sys"
 version = "0.52.0"

core/src/inner.rs

@@ -1,6 +1,7 @@
 use std::{
     fs::File,
     io::{BufRead, BufReader, Read},
+    ops::{Deref, DerefMut},
     os::unix::fs::PermissionsExt,
     path::{Path, PathBuf},
     rc::Rc,
@@ -14,8 +15,34 @@ use temp_dir::TempDir;
 
 const TAB_DATA: Dir = include_dir!("$CARGO_MANIFEST_DIR/tabs");
 
-pub fn get_tabs(validate: bool) -> (TempDir, Vec<Tab>) {
-    let (temp_dir, tab_files) = TabList::get_tabs();
+// Allow the unused TempDir to be stored for later destructor call
+#[allow(dead_code)]
+pub struct TabList(pub Vec<Tab>, TempDir);
+
+// Implement deref to allow Vec<Tab> methods to be called on TabList
+impl Deref for TabList {
+    type Target = Vec<Tab>;
+
+    fn deref(&self) -> &Self::Target {
+        &self.0
+    }
+}
+impl DerefMut for TabList {
+    fn deref_mut(&mut self) -> &mut Self::Target {
+        &mut self.0
+    }
+}
+impl IntoIterator for TabList {
+    type Item = Tab;
+    type IntoIter = std::vec::IntoIter<Self::Item>;
+
+    fn into_iter(self) -> Self::IntoIter {
+        self.0.into_iter()
+    }
+}
+
+pub fn get_tabs(validate: bool) -> TabList {
+    let (temp_dir, tab_files) = TabDirectories::get_tabs();
 
     let tabs: Vec<_> = tab_files
         .into_iter()
@@ -33,40 +60,28 @@ pub fn get_tabs(validate: bool) -> (TempDir, Vec<Tab>) {
 
     let tabs: Vec<Tab> = tabs
         .into_iter()
-        .map(
-            |(
-                TabEntry {
-                    name,
-                    data,
-                    multi_selectable,
-                },
-                directory,
-            )| {
-                let mut tree = Tree::new(Rc::new(ListNode {
-                    name: "root".to_string(),
-                    description: String::new(),
-                    command: Command::None,
-                    task_list: String::new(),
-                }));
-                let mut root = tree.root_mut();
-                create_directory(data, &mut root, &directory, validate);
-                Tab {
-                    name,
-                    tree,
-                    multi_selectable,
-                }
-            },
-        )
+        .map(|(TabEntry { name, data }, directory)| {
+            let mut tree = Tree::new(Rc::new(ListNode {
+                name: "root".to_string(),
+                description: String::new(),
+                command: Command::None,
+                task_list: String::new(),
+                multi_select: false,
+            }));
+            let mut root = tree.root_mut();
+            create_directory(data, &mut root, &directory, validate, true);
+            Tab { name, tree }
+        })
         .collect();
 
     if tabs.is_empty() {
         panic!("No tabs found");
     }
-    (temp_dir, tabs)
+    TabList(tabs, temp_dir)
 }
 
 #[derive(Deserialize)]
-struct TabList {
+struct TabDirectories {
     directories: Vec<PathBuf>,
 }
 
@@ -74,12 +89,6 @@ struct TabList {
 struct TabEntry {
     name: String,
     data: Vec<Entry>,
-    #[serde(default = "default_multi_selectable")]
-    multi_selectable: bool,
-}
-
-fn default_multi_selectable() -> bool {
-    true
 }
 
 #[derive(Deserialize)]
@@ -94,6 +103,12 @@ struct Entry {
     entry_type: EntryType,
     #[serde(default)]
     task_list: String,
+    #[serde(default = "default_true")]
+    multi_select: bool,
+}
+
+fn default_true() -> bool {
+    true
 }
 
 #[derive(Deserialize)]
@@ -174,8 +189,11 @@ fn create_directory(
     node: &mut NodeMut<Rc<ListNode>>,
     command_dir: &Path,
     validate: bool,
+    parent_multi_select: bool,
 ) {
     for entry in data {
+        let multi_select = parent_multi_select && entry.multi_select;
+
         match entry.entry_type {
             EntryType::Entries(entries) => {
                 let mut node = node.append(Rc::new(ListNode {
@@ -183,8 +201,9 @@ fn create_directory(
                     description: entry.description,
                     command: Command::None,
                     task_list: String::new(),
+                    multi_select,
                 }));
-                create_directory(entries, &mut node, command_dir, validate);
+                create_directory(entries, &mut node, command_dir, validate, multi_select);
             }
             EntryType::Command(command) => {
                 node.append(Rc::new(ListNode {
@@ -192,6 +211,7 @@ fn create_directory(
                     description: entry.description,
                     command: Command::Raw(command),
                     task_list: String::new(),
+                    multi_select,
                 }));
             }
             EntryType::Script(script) => {
@@ -210,6 +230,7 @@ fn create_directory(
                             file: script,
                         },
                         task_list: entry.task_list,
+                        multi_select,
                     }));
                 }
             }
@@ -252,9 +273,9 @@ fn is_executable(path: &Path) -> bool {
         .unwrap_or(false)
 }
 
-impl TabList {
+impl TabDirectories {
     fn get_tabs() -> (TempDir, Vec<PathBuf>) {
-        let temp_dir = TempDir::new().unwrap();
+        let temp_dir = TempDir::with_prefix("linutil_scripts").unwrap();
         TAB_DATA
             .extract(&temp_dir)
             .expect("Failed to extract the saved directory");

core/src/lib.rs

@@ -5,7 +5,7 @@ use std::rc::Rc;
 use ego_tree::Tree;
 use std::path::PathBuf;
 
-pub use inner::get_tabs;
+pub use inner::{get_tabs, TabList};
 
 #[derive(Clone, Hash, Eq, PartialEq)]
 pub enum Command {
@@ -23,7 +23,6 @@ pub enum Command {
 pub struct Tab {
     pub name: String,
     pub tree: Tree<Rc<ListNode>>,
-    pub multi_selectable: bool,
 }
 
 #[derive(Clone, Hash, Eq, PartialEq)]
@@ -32,4 +31,5 @@ pub struct ListNode {
     pub description: String,
     pub command: Command,
     pub task_list: String,
+    pub multi_select: bool,
 }

core/tabs/applications-setup/Developer-tools/jetbrains-toolbox.sh

@@ -0,0 +1,48 @@
+#!/bin/sh -e
+
+. ../../common-script.sh
+
+manualInstall() {
+    JETBRAINS_TOOLBOX_DIR="/opt/jetbrains-toolbox"
+
+    case "$ARCH" in
+        x86_64) ARCHIVE_URL=$(curl -s "https://data.services.jetbrains.com/products/releases?code=TBA&latest=true&type=release" | jq -r ".TBA[0].downloads.linux.link") ;;
+        aarch64) ARCHIVE_URL=$(curl -s "https://data.services.jetbrains.com/products/releases?code=TBA&latest=true&type=release" | jq -r ".TBA[0].downloads.linuxARM64.link") ;;
+    esac
+
+    curl -fSL "$ARCHIVE_URL" -o "jetbrains-toolbox.tar.gz"
+
+    if [ -d "$JETBRAINS_TOOLBOX_DIR" ]; then
+        "$ESCALATION_TOOL" rm -rf "$JETBRAINS_TOOLBOX_DIR"
+    fi
+
+    "$ESCALATION_TOOL" mkdir -p "$JETBRAINS_TOOLBOX_DIR"
+    "$ESCALATION_TOOL" tar -xzf "jetbrains-toolbox.tar.gz" -C "$JETBRAINS_TOOLBOX_DIR" --strip-components=1
+    "$ESCALATION_TOOL" ln -sf "$JETBRAINS_TOOLBOX_DIR/jetbrains-toolbox" "/usr/bin/jetbrains-toolbox"
+}
+
+installJetBrainsToolBox() {
+    if ! command_exists jetbrains-toolbox; then
+        printf "%b\n" "${YELLOW}Installing Jetbrains Toolbox...${RC}"
+        case "$PACKAGER" in
+            pacman)
+                "$AUR_HELPER" -S --needed --noconfirm jetbrains-toolbox
+                ;;
+            dnf)
+                manualInstall
+                ;;
+            *)
+                "$ESCALATION_TOOL" "$PACKAGER" install -y libfuse2
+                manualInstall
+                ;;
+        esac
+        printf "%b\n" "${GREEN}Successfully installed Jetbrains Toolbox.${RC}"
+    else
+        printf "%b\n" "${GREEN}Jetbrains toolbox is already installed.${RC}"
+    fi
+}
+
+checkEnv
+checkEscalationTool
+checkAURHelper
+installJetBrainsToolBox

core/tabs/applications-setup/Developer-tools/meld-setup.sh

@@ -3,7 +3,7 @@
 . ../../common-script.sh
 
 installMeld() {
-    if ! command_exists meld; then
+    if ! command_exists org.gnome.meld && ! command_exists meld; then
         printf "%b\n" "${YELLOW}Installing Meld...${RC}"
         case "$PACKAGER" in
             pacman)
@@ -13,7 +13,7 @@ installMeld() {
                 "$ESCALATION_TOOL" "$PACKAGER" -y install meld
                 ;;
             *)
-                . ../setup-flatpak.sh
+                checkFlatpak
                 flatpak install -y flathub org.gnome.meld
                 ;;
         esac

core/tabs/applications-setup/bottles-setup.sh

@@ -3,14 +3,9 @@
 . ../common-script.sh
 
 installBottles() {
-    if ! command_exists flatpak; then
-    printf "%b\n" "${YELLOW}Installing Bottles...${RC}"
-        case "$PACKAGER" in
-            *)
-                . ./setup-flatpak.sh
-                flatpak install -y flathub com.usebottles.bottles
-                ;;
-        esac
+    if ! command_exists com.usebottles.bottles; then
+        printf "%b\n" "${YELLOW}Installing Bottles...${RC}"
+        flatpak install -y flathub com.usebottles.bottles
     else
         printf "%b\n" "${GREEN}Bottles is already installed.${RC}"
     fi
@@ -18,4 +13,5 @@ installBottles() {
 
 checkEnv
 checkEscalationTool
+checkFlatpak
 installBottles

core/tabs/applications-setup/browsers/vivaldi.sh

@@ -2,22 +2,39 @@
 
 . ../../common-script.sh
 
-installLynx() {
-    if ! command_exists lynx; then
-        printf "%b\n" "${YELLOW}Installing Lynx...${RC}"
+installVivaldi() {
+    if ! command_exists vivaldi; then
+        printf "%b\n" "${YELLOW}Installing Vivaldi...${RC}"
         case "$PACKAGER" in
+            apt-get|nala)
+                "$ESCALATION_TOOL" "$PACKAGER" install -y curl
+                "$ESCALATION_TOOL" curl -fsSL https://repo.vivaldi.com/archive/linux_signing_key.pub | gpg --dearmor | sudo dd of=/usr/share/keyrings/vivaldi-browser.gpg
+                "$ESCALATION_TOOL" echo "deb [signed-by=/usr/share/keyrings/vivaldi-browser.gpg arch=$(dpkg --print-architecture)] https://repo.vivaldi.com/archive/deb/ stable main" | sudo dd of=/etc/apt/sources.list.d/vivaldi-archive.list
+                "$ESCALATION_TOOL" "$PACKAGER" update
+                "$ESCALATION_TOOL" "$PACKAGER" install -y vivaldi-stable
+                ;;
+            dnf)
+                "$ESCALATION_TOOL" "$PACKAGER" install -y dnf-plugins-core
+                "$ESCALATION_TOOL" "$PACKAGER" config-manager --add-repo https://repo.vivaldi.com/stable/vivaldi-fedora.repo
+                "$ESCALATION_TOOL" "$PACKAGER" install -y vivaldi-stable
+                ;;
+            zypper)
+                "$ESCALATION_TOOL" zypper ar https://repo.vivaldi.com/archive/vivaldi-suse.repo
+                "$ESCALATION_TOOL" zypper --non-interactive --gpg-auto-import-keys in vivaldi-stable
+                ;;
             pacman)
-                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm lynx
+                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm vivaldi
                 ;;
             *)
-                "$ESCALATION_TOOL" "$PACKAGER" install -y lynx
+                printf "%b\n" "${RED}Unsupported package manager: ""$PACKAGER""${RC}"
+                exit 1
                 ;;
         esac
     else
-        printf "%b\n" "${GREEN}Lynx TUI Browser is already installed.${RC}"
+        printf "%b\n" "${GREEN}Vivaldi Browser is already installed.${RC}"
     fi
 }
 
 checkEnv
 checkEscalationTool
-installLynx
+installVivaldi

core/tabs/applications-setup/browsers/waterfox.sh

@@ -0,0 +1,25 @@
+#!/bin/sh -e
+
+. ../../common-script.sh
+
+installWaterfox() {
+    if ! command_exists waterfox; then
+        printf "%b\n" "${YELLOW}Installing waterfox...${RC}"
+        case "$PACKAGER" in
+            pacman)
+		"$AUR_HELPER" -S --needed --noconfirm waterfox-bin
+                ;;
+            *)
+		. ../setup-flatpak.sh
+                flatpak install -y flathub net.waterfox.waterfox
+                ;;
+        esac
+    else
+        printf "%b\n" "${GREEN}Waterfox is already installed.${RC}"
+    fi
+}
+
+checkEnv
+checkEscalationTool
+checkAURHelper
+installWaterfox

core/tabs/applications-setup/communication-apps/signal-setup.sh

@@ -3,7 +3,7 @@
 . ../../common-script.sh
 
 installSignal() {
-    if ! command_exists signal; then
+    if ! command_exists org.signal.Signal && ! command_exists signal; then
         printf "%b\n" "${YELLOW}Installing Signal...${RC}"
         case "$PACKAGER" in
             apt-get|nala)
@@ -20,8 +20,8 @@ installSignal() {
                 "$ESCALATION_TOOL" "$PACKAGER" -S --noconfirm signal-desktop
                 ;;
             dnf)
-                "$ESCALATION_TOOL" "$PACKAGER" copr enable luminoso/Signal-Desktop
-                "$ESCALATION_TOOL" "$PACKAGER" install -y signal-desktop 
+                checkFlatpak
+                flatpak install -y flathub org.signal.Signal
                 ;;
             *)
                 printf "%b\n" "${RED}Unsupported package manager: ""$PACKAGER""${RC}"

core/tabs/applications-setup/communication-apps/slack-setup.sh

@@ -3,14 +3,14 @@
 . ../../common-script.sh
 
 installSlack() {
-    if ! command_exists slack; then
+    if ! command_exists com.slack.Slack && ! command_exists slack; then
         printf "%b\n" "${YELLOW}Installing Slack...${RC}"
         case "$PACKAGER" in
             pacman)
                 "$AUR_HELPER" -S --needed --noconfirm slack-desktop
                 ;;
             *)  
-                . ../setup-flatpak.sh
+                checkFlatpak
                 flatpak install -y flathub com.slack.Slack
                 ;;
         esac

core/tabs/applications-setup/communication-apps/zoom-setup.sh

@@ -3,14 +3,14 @@
 . ../../common-script.sh
 
 installZoom() {
-    if ! command_exists zoom; then
+    if ! command_exists us.zoom.Zoom && ! command_exists zoom; then
         printf "%b\n" "${YELLOW}Installing Zoom...${RC}"
         case "$PACKAGER" in
             pacman)
                 "$AUR_HELPER" -S --needed --noconfirm zoom
                 ;;
             *)
-                . ../setup-flatpak.sh
+                checkFlatpak
                 flatpak install -y flathub us.zoom.Zoom
                 ;;
         esac

core/tabs/applications-setup/docker-setup.sh

@@ -26,6 +26,12 @@ install_docker() {
         apt-get|nala)
             curl -fsSL https://get.docker.com | sh 
             ;;
+        dnf)
+            "$ESCALATION_TOOL" "$PACKAGER" -y install dnf-plugins-core
+            "$ESCALATION_TOOL" "$PACKAGER" config-manager --add-repo https://download.docker.com/linux/fedora/docker-ce.repo
+            "$ESCALATION_TOOL" "$PACKAGER" -y install docker-ce docker-ce-cli containerd.io docker-buildx-plugin
+            "$ESCALATION_TOOL" systemctl enable --now docker
+            ;;
         zypper)
             "$ESCALATION_TOOL" "$PACKAGER" --non-interactive install docker
             "$ESCALATION_TOOL" systemctl enable docker
@@ -49,6 +55,11 @@ install_docker_compose() {
         apt-get|nala)
             "$ESCALATION_TOOL" "$PACKAGER" install -y docker-compose-plugin
             ;;
+        dnf)
+            "$ESCALATION_TOOL" "$PACKAGER" -y install dnf-plugins-core
+            "$ESCALATION_TOOL" "$PACKAGER" config-manager --add-repo https://download.docker.com/linux/fedora/docker-ce.repo
+            "$ESCALATION_TOOL" "$PACKAGER" install -y docker-compose-plugin
+            ;;
         zypper)
             "$ESCALATION_TOOL" "$PACKAGER" --non-interactive install docker-compose
             ;;

core/tabs/applications-setup/dwmtitus-setup.sh

@@ -214,10 +214,28 @@ setupDisplayManager() {
         printf "%b\n" "${YELLOW}3. GDM ${RC}" 
         printf "%b\n" "${YELLOW} ${RC}" 
         printf "%b" "${YELLOW}Please select one: ${RC}"
-        read -r DM
+        read -r choice
+        case "$choice" in
+        1)
+            DM="sddm"
+            ;;
+        2)
+            DM="lightdm"
+            ;;
+        3)
+            DM="gdm"
+            ;;
+        *)
+            printf "%b\n" "${RED}Invalid selection! Please choose 1, 2, or 3.${RC}"
+            exit 1
+            ;;
+        esac
         case "$PACKAGER" in
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm "$DM"
+                if [ "$DM" = "lightdm" ]; then
+                    "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm lightdm-gtk-greeter
+                fi
                 ;;
             apt-get|nala)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y "$DM"

core/tabs/applications-setup/mybash-setup.sh

@@ -5,16 +5,16 @@
 gitpath="$HOME/.local/share/mybash"
 
 installDepend() {
-    if ! command_exists bash bash-completion tar bat tree unzip fontconfig git; then
-    printf "%b\n" "${YELLOW}Installing Bash...${RC}"
-    case "$PACKAGER" in
-        pacman)
-            "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm bash bash-completion tar bat tree unzip fontconfig git
-            ;;
-        *)
-            "$ESCALATION_TOOL" "$PACKAGER" install -y bash bash-completion tar bat tree unzip fontconfig git
-            ;;
-    esac
+    if [ ! -f "/usr/share/bash-completion/bash_completion" ] || ! command_exists bash tar bat tree unzip fc-list git; then
+        printf "%b\n" "${YELLOW}Installing Bash...${RC}"
+        case "$PACKAGER" in
+            pacman)
+                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm bash bash-completion tar bat tree unzip fontconfig git
+                ;;
+            *)
+                "$ESCALATION_TOOL" "$PACKAGER" install -y bash bash-completion tar bat tree unzip fontconfig git
+                ;;
+        esac
     fi
 }
 

core/tabs/applications-setup/office-suites/freeoffice.sh

@@ -1,6 +1,6 @@
 #!/bin/sh -e
 
-. ../common-script.sh
+. ../../common-script.sh
 
 installFreeOffice() {  
     if ! command_exists softmaker-freeoffice-2024 freeoffice softmaker; then

core/tabs/applications-setup/office-suites/libreoffice.sh

@@ -1,16 +1,16 @@
 #!/bin/sh -e
 
-. ../common-script.sh
+. ../../common-script.sh
 
 installLibreOffice() {
-    if ! command_exists libreoffice; then
+    if ! command_exists org.libreoffice.LibreOffice && ! command_exists libreoffice; then
         printf "%b\n" "${YELLOW}Installing Libre Office...${RC}"
         case "$PACKAGER" in
             apt-get|nala)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y libreoffice-core
                 ;;
             zypper|dnf)
-                . ./setup-flatpak.sh
+                checkFlatpak
                 flatpak install -y flathub org.libreoffice.LibreOffice
                 ;;
             pacman)

core/tabs/applications-setup/office-suites/onlyoffice.sh

@@ -1,9 +1,9 @@
 #!/bin/sh -e
 
-. ../common-script.sh
+. ../../common-script.sh
 
 installOnlyOffice() {
-    if ! command_exists onlyoffice-desktopeditors; then
+    if ! command_exists org.onlyoffice.desktopeditors && ! command_exists onlyoffice-desktopeditors; then
         printf "%b\n" "${YELLOW}Installing Only Office..${RC}."
         case "$PACKAGER" in
             apt-get|nala)
@@ -11,7 +11,7 @@ installOnlyOffice() {
                 "$ESCALATION_TOOL" "$PACKAGER" install -y ./onlyoffice-desktopeditors_amd64.deb
                 ;;
             zypper|dnf)
-                . ./setup-flatpak.sh
+                checkFlatpak
                 flatpak install -y flathub org.onlyoffice.desktopeditors
                 ;;
             pacman)

core/tabs/applications-setup/office-suites/wpsoffice.sh

@@ -1,16 +1,16 @@
 #!/bin/sh -e
 
-. ../common-script.sh
+. ../../common-script.sh
 
 installWpsOffice() {
-    if ! command_exists com.wps.Office; then
+    if ! command_exists com.wps.Office && ! command_exists wps; then
         printf "%b\n" "${YELLOW}Installing WPS Office...${RC}"
         case "$PACKAGER" in
             pacman)
                 "$AUR_HELPER" -S --needed --noconfirm wps-office
                 ;;
             *)
-                . ./setup-flatpak.sh
+                checkFlatpak
                 flatpak install flathub com.wps.Office
                 ;;
         esac

core/tabs/applications-setup/pdf-suites/evince.sh

@@ -1,6 +1,6 @@
 #!/bin/sh -e
 
-. ../common-script.sh
+. ../../common-script.sh
 
 installEvince() {
     if ! command_exists evince; then

core/tabs/applications-setup/pdf-suites/okular.sh

@@ -1,6 +1,6 @@
 #!/bin/sh -e
 
-. ../common-script.sh
+. ../../common-script.sh
 
 installOkular() {
     if ! command_exists okular; then

core/tabs/applications-setup/pdf-suites/pdfstudio.sh

@@ -1,6 +1,6 @@
 #!/bin/sh -e
 
-. ../common-script.sh
+. ../../common-script.sh
 
 installPdfstudio() {
     if ! command_exists pdfstudio2024; then

core/tabs/applications-setup/pdf-suites/pdfstudioviewer.sh

@@ -1,6 +1,6 @@
 #!/bin/sh -e
 
-. ../common-script.sh
+. ../../common-script.sh
 
 installPdfstudioviewer() {
     if ! command_exists pdfstudioviewer2024; then

core/tabs/applications-setup/podman-compose-setup.sh

@@ -0,0 +1,33 @@
+#!/bin/sh -e
+
+. ../common-script.sh
+
+installPodmanCompose() {
+    if ! command_exists podman-compose; then
+        printf "%b\n" "${YELLOW}Installing Podman Compose...${RC}"
+        case "$PACKAGER" in
+            apt-get|nala)
+                "$ESCALATION_TOOL" "$PACKAGER" install -y podman-compose
+                ;;
+            zypper)
+                "$ESCALATION_TOOL" "$PACKAGER" --non-interactive install podman-compose
+                ;;
+            pacman)
+                "$ESCALATION_TOOL" "$PACKAGER" -S --noconfirm --needed podman-compose
+                ;;
+            dnf)
+                "$ESCALATION_TOOL" "$PACKAGER" install -y podman-compose
+                ;;
+            *)
+                printf "%b\n" "${RED}Unsupported package manager: ${PACKAGER}${RC}"
+                exit 1
+                ;;
+        esac
+    else
+        printf "%b\n" "${GREEN}Podman Compose is already installed.${RC}"
+    fi
+}
+
+checkEnv
+checkEscalationTool
+installPodmanCompose

core/tabs/applications-setup/podman-setup.sh

@@ -0,0 +1,33 @@
+#!/bin/sh -e
+
+. ../common-script.sh
+
+installPodman() {
+    if ! command_exists podman; then
+        printf "%b\n" "${YELLOW}Installing Podman...${RC}"
+        case "$PACKAGER" in
+            apt-get|nala)
+                "$ESCALATION_TOOL" "$PACKAGER" install -y podman
+                ;;
+            zypper)
+                "$ESCALATION_TOOL" "$PACKAGER" --non-interactive install podman
+                ;;
+            pacman)
+                "$ESCALATION_TOOL" "$PACKAGER" -S --noconfirm --needed podman
+                ;;
+            dnf)
+                "$ESCALATION_TOOL" "$PACKAGER" install -y podman
+                ;;
+            *)
+                printf "%b\n" "${RED}Unsupported package manager: ${PACKAGER}${RC}"
+                exit 1
+                ;;
+        esac
+    else
+        printf "%b\n" "${GREEN}Podman is already installed.${RC}"
+    fi
+}
+
+checkEnv
+checkEscalationTool
+installPodman

core/tabs/applications-setup/setup-flatpak.sh

@@ -2,9 +2,7 @@
 
 . ../common-script.sh
 
-# Used to detect the desktop environment, Only used for the If statement in the setup_flatpak function.
-# Perhaps this should be moved to common-script.sh later on?
-detect_de() {
+checkDE() {
     if [ -n "$XDG_CURRENT_DESKTOP" ]; then
         case "$XDG_CURRENT_DESKTOP" in
             *GNOME*)
@@ -17,42 +15,11 @@ detect_de() {
     fi
 }
 
-# Install Flatpak if not already installed.
-setup_flatpak() {
-    if ! command_exists flatpak; then
-    printf "%b\n" "${YELLOW}Installing Flatpak...${RC}"
-        case "$PACKAGER" in
-            pacman)
-                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm flatpak
-                ;;
-            *)
-                "$ESCALATION_TOOL" "$PACKAGER" install -y flatpak
-                ;;
-        esac
-        printf "%b\n" "Adding Flathub remote..."
-        "$ESCALATION_TOOL" flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
-    else
-        if command_exists flatpak; then
-            if ! flatpak remotes | grep -q "flathub"; then
-                printf "%b" "${YELLOW}Detected Flatpak package manager but Flathub remote is not added. Would you like to add it? (y/N): ${RC}"
-                read -r add_remote
-                case "$add_remote" in
-                    [Yy]*)
-                        printf "%b\n" "Adding Flathub remote..."
-                        "$ESCALATION_TOOL" flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
-                        ;;
-                esac
-            else
-                # Needed mostly for systems without a polkit agent running (Error: updating: Unable to connect to system bus)
-                printf "%b\n" "${GREEN}Flathub already setup. You can quit.${RC}"
-            fi
-        fi
-    fi
-
+installExtra() {
     if [ "$PACKAGER" = "apt-get" ] || [ "$PACKAGER" = "nala" ]; then
-        detect_de
+        checkDE
         # Only used for Ubuntu GNOME. Ubuntu GNOME doesnt allow flathub to be added as a remote to their store.
-        # So in case the user wants to use a GUI siftware manager they can setup it here
+        # So in case the user wants to use a GUI software manager they can setup it here
         if [ "$DE" = "GNOME" ]; then
             printf "%b" "${YELLOW}Detected GNOME desktop environment. Would you like to install GNOME Software plugin for Flatpak? (y/N): ${RC}"
             read -r install_gnome
@@ -72,4 +39,5 @@ setup_flatpak() {
 
 checkEnv
 checkEscalationTool
-setup_flatpak
+checkFlatpak
+installExtra

core/tabs/applications-setup/tab_data.toml

@@ -1,50 +1,5 @@
 name = "Applications Setup"
 
-[[data]]
-name = "Developer Tools"
-
-[[data.entries]]
-name = "Github Desktop"
-description = "GitHub Desktop is a user-friendly application that simplifies the process of managing Git repositories and interacting with GitHub, providing a graphical interface for tasks like committing, branching, and syncing changes."
-script = "Developer-tools/githubdesktop-setup.sh"
-task_list = "I"
-
-[[data.entries]]
-name = "Neovim"
-description = "Neovim is a refactor, and sometimes redactor, in the tradition of Vim.\nIt is not a rewrite but a continuation and extension of Vim.\nThis command configures neovim from CTT's neovim configuration.\nhttps://github.com/ChrisTitusTech/neovim"
-script = "Developer-tools/neovim-setup.sh"
-task_list = "I FM"
-
-[[data.entries]]
-name = "Sublime Text"
-description = "Sublime Text is a fast, lightweight, and customizable text editor known for its simplicity, powerful features, and wide range of plugins for various programming languages."
-script = "Developer-tools/sublime-setup.sh"
-task_list = "I"
-
-[[data.entries]]
-name = "VS Code"
-description = "Visual Studio Code (VS Code) is a lightweight, open-source code editor with built-in support for debugging, version control, and extensions for various programming languages and frameworks."
-script = "Developer-tools/vscode-setup.sh"
-task_list = "I"
-
-[[data.entries]]
-name = "VS Codium"
-description = "VSCodium is a free, open-source version of Visual Studio Code (VS Code) that removes Microsoft-specific telemetry and branding."
-script = "Developer-tools/vscodium-setup.sh"
-task_list = "I"
-
-[[data.entries]]
-name = "Meld"
-description = "Meld is a visual diff and merge tool that helps compare files, directories, and version-controlled projects."
-script = "Developer-tools/meld-setup.sh"
-task_list = "I FI"
-
-[[data.entries]]
-name = "Ngrok"
-description = "Ngrok is a tool that creates secure, temporary tunnels to expose local servers to the internet for testing and development."
-script = "Developer-tools/ngrok-setup.sh"
-task_list = "I"
-
 [[data]]
 name = "Communication Apps"
 
@@ -78,21 +33,77 @@ description = "Telegram is a cloud-based messaging app known for its speed and s
 script = "communication-apps/telegram-setup.sh"
 task_list = "I"
 
-[[data.entries]]
-name = "Zoom"
-description = "Zoom is a widely-used video conferencing platform that allows users to host virtual meetings, webinars, and online collaboration with features like screen sharing and recording."
-script = "communication-apps/zoom-setup.sh"
-task_list = "I"
-
 [[data.entries]]
 name = "Thunderbird"
 description = "Thunderbird is a free, open-source email client that offers powerful features like customizable email management, a built-in calendar, and extensive add-ons for enhanced functionality."
 script = "communication-apps/thunderbird-setup.sh"
 task_list = "I"
 
+[[data.entries]]
+name = "Zoom"
+description = "Zoom is a widely-used video conferencing platform that allows users to host virtual meetings, webinars, and online collaboration with features like screen sharing and recording."
+script = "communication-apps/zoom-setup.sh"
+task_list = "I"
+
+[[data]]
+name = "Developer Tools"
+
+[[data.entries]]
+name = "Github Desktop"
+description = "GitHub Desktop is a user-friendly application that simplifies the process of managing Git repositories and interacting with GitHub, providing a graphical interface for tasks like committing, branching, and syncing changes."
+script = "Developer-tools/githubdesktop-setup.sh"
+task_list = "I"
+
+[[data.entries]]
+name = "JetBrains Toolbox"
+description = "JetBrains Toolbox is a collection of tools and an app that help developers work with JetBrains products."
+script = "Developer-tools/jetbrains-toolbox.sh"
+task_list = "I"
+
+[[data.entries]]
+name = "Meld"
+description = "Meld is a visual diff and merge tool that helps compare files, directories, and version-controlled projects."
+script = "Developer-tools/meld-setup.sh"
+task_list = "I FI"
+
+[[data.entries]]
+name = "Neovim"
+description = "Neovim is a refactor, and sometimes redactor, in the tradition of Vim.\nIt is not a rewrite but a continuation and extension of Vim.\nThis command configures neovim from CTT's neovim configuration.\nhttps://github.com/ChrisTitusTech/neovim"
+script = "Developer-tools/neovim-setup.sh"
+task_list = "I FM"
+
+[[data.entries]]
+name = "Ngrok"
+description = "Ngrok is a tool that creates secure, temporary tunnels to expose local servers to the internet for testing and development."
+script = "Developer-tools/ngrok-setup.sh"
+task_list = "I"
+
+[[data.entries]]
+name = "Sublime Text"
+description = "Sublime Text is a fast, lightweight, and customizable text editor known for its simplicity, powerful features, and wide range of plugins for various programming languages."
+script = "Developer-tools/sublime-setup.sh"
+task_list = "I"
+
+[[data.entries]]
+name = "VS Code"
+description = "Visual Studio Code (VS Code) is a lightweight, open-source code editor with built-in support for debugging, version control, and extensions for various programming languages and frameworks."
+script = "Developer-tools/vscode-setup.sh"
+task_list = "I"
+
+[[data.entries]]
+name = "VS Codium"
+description = "VSCodium is a free, open-source version of Visual Studio Code (VS Code) that removes Microsoft-specific telemetry and branding."
+script = "Developer-tools/vscodium-setup.sh"
+task_list = "I"
+
 [[data]]
 name = "Office Suites"
 
+[[data.entries]]
+name = "FreeOffice"
+script = "office-suites/freeoffice.sh"
+task_list = "I"
+
 [[data.entries]]
 name = "LibreOffice"
 script = "office-suites/libreoffice.sh"
@@ -103,11 +114,6 @@ name = "OnlyOffice"
 script = "office-suites/onlyoffice.sh"
 task_list = "I"
 
-[[data.entries]]
-name = "FreeOffice"
-script = "office-suites/freeoffice.sh"
-task_list = "I"
-
 [[data.entries]]
 name = "WPS Office"
 script = "office-suites/wpsoffice.sh"
@@ -186,9 +192,15 @@ description = "Vivaldi is a freeware, cross-platform web browser developed by Vi
 script = "browsers/vivaldi.sh"
 task_list = "I"
 
+[[data.entries]]
+name = "waterfox"
+description = "Waterfox is the privacy-focused web browser engineered to give you speed, control, and peace of mind on the internet."
+script = "browsers/waterfox.sh"
+task_list = "FI"
+
 [[data]]
 name = "Alacritty"
-description = "Alacritty is a modern terminal emulator that comes with sensible defaults, but allows for extensive configuration. By integrating with other applications, rather than reimplementing their functionality, it manages to provide a flexible set of features with high performance. The supported platforms currently consist of BSD, Linux, macOS and Windows.\nThis command installs and condifures alacritty terminal emulator."
+description = "Alacritty is a modern terminal emulator that comes with sensible defaults, but allows for extensive configuration. By integrating with other applications, rather than reimplementing their functionality, it manages to provide a flexible set of features with high performance. The supported platforms currently consist of BSD, Linux, macOS and Windows. This command installs and configures alacritty terminal emulator."
 script = "alacritty-setup.sh"
 task_list = "I FM"
 
@@ -200,37 +212,49 @@ task_list = "I"
 
 [[data]]
 name = "Bash Prompt"
-description = "The .bashrc file is a script that runs every time a new terminal session is started in Unix-like operating systems.\nIt is used to configure the shell session, set up aliases, define functions, and more, making the terminal easier to use and more powerful.\nThis command configures the key sections and functionalities defined in the .bashrc file from CTT's mybash repository.\nhttps://github.com/ChrisTitusTech/mybash"
+description = "The .bashrc file is a script that runs every time a new terminal session is started in Unix-like operating systems. It is used to configure the shell session, set up aliases, define functions, and more, making the terminal easier to use and more powerful. This command configures the key sections and functionalities defined in the .bashrc file from CTT's mybash repository. https://github.com/ChrisTitusTech/mybash"
 script = "mybash-setup.sh"
 task_list = "I FM"
 
 [[data]]
 name = "Bottles"
-description = "Bottles allows Windows software, like applications and games, to run on Linux.\nBottles also provides tools to categorize, organize and optimize your applications."
+description = "Bottles allows Windows software, like applications and games, to run on Linux. Bottles also provides tools to categorize, organize and optimize your applications."
 script = "bottles-setup.sh"
 task_list = "FI"
 
-[[data]]
-name = "DWM-Titus"
-description = "DWM is a dynamic window manager for X.\nIt manages windows in tiled, monocle and floating layouts.\nAll of the layouts can be applied dynamically, optimising the environment for the application in use and the task performed.\nThis command installs and configures DWM and a desktop manager.\nThe list of patches applied can be found in CTT's DWM repository\nhttps://github.com/ChrisTitusTech/dwm-titus"
-script = "dwmtitus-setup.sh"
-task_list = "I PFM SS"
-
 [[data]]
 name = "Docker"
 description = "Docker is an open platform that uses OS-level virtualization to deliver software in packages called containers."
 script = "docker-setup.sh"
 task_list = "I SS"
 
+[[data]]
+name = "Podman"
+description = "Podman is a daemon-less open platform that uses OS-level virtualization to deliver software in packages called containers."
+script = "podman-setup.sh"
+task_list = "I SS"
+
+[[data]]
+name = "Podman-compose"
+description = "Podman Compose is a tool for defining and running multi-container applications using Podman."
+script = "podman-compose-setup.sh"
+task_list = "I SS"
+
+[[data]]
+name = "DWM-Titus"
+description = "DWM is a dynamic window manager for X.\nIt manages windows in tiled, monocle and floating layouts.\nAll of the layouts can be applied dynamically, optimising the environment for the application in use and the task performed.\nThis command installs and configures DWM and a desktop manager.\nThe list of patches applied can be found in CTT's DWM repository\nhttps://github.com/ChrisTitusTech/dwm-titus"
+script = "dwmtitus-setup.sh"
+task_list = "I PFM SS"
+
 [[data]]
 name = "Fastfetch"
-description = "Fastfetch is a neofetch-like tool for fetching system information and displaying it prettily.\nIt is written mainly in C, with performance and customizability in mind.\nThis command installs fastfetch and configures from CTT's mybash repository.\nhttps://github.com/ChrisTitusTech/mybash"
+description = "Fastfetch is a neofetch-like tool for fetching system information and displaying it prettily. It is written mainly in C, with performance and customizability in mind. This command installs fastfetch and configures from CTT's mybash repository. https://github.com/ChrisTitusTech/mybash"
 script = "fastfetch-setup.sh"
 task_list = "I FM"
 
 [[data]]
 name = "Flatpak / Flathub"
-description = "Flatpak is a universal application sandbox for Linux that uses isolated packages from Flathub to prevent conflicts and system alterations, while alleviating dependency concerns.\nThis command installs Flatpak and adds the Flathub repository"
+description = "Flatpak is a universal application sandbox for Linux that uses isolated packages from Flathub to prevent conflicts and system alterations, while alleviating dependency concerns. This command installs Flatpak and adds the Flathub repository"
 script = "setup-flatpak.sh"
 task_list = "I"
 
@@ -242,7 +266,7 @@ task_list = "PFM"
 
 [[data]]
 name = "Kitty"
-description = "kitty is a free and open-source GPU-accelerated terminal emulator for Linux, macOS, and some BSD distributions, focused on performance and features.\nkitty is written in a mix of C and Python programming languages.\n This command installs and configures kitty."
+description = "kitty is a free and open-source GPU-accelerated terminal emulator for Linux, macOS, and some BSD distributions, focused on performance and features. kitty is written in a mix of C and Python programming languages. This command installs and configures kitty."
 script = "kitty-setup.sh"
 task_list = "I FM"
 
@@ -270,7 +294,7 @@ values = [ "linutil" ]
 
 [[data]]
 name = "Rofi"
-description = "Rofi is a window switcher, run dialog, ssh-launcher and dmenu replacement that started as a clone of simpleswitcher, written by Sean Pringle and later expanded by Dave Davenport.\nThis command installs and configures rofi with configuration from CTT's DWM repo.\nhttps://github.com/ChrisTitusTech/dwm-titus"
+description = "Rofi is a window switcher, run dialog, ssh-launcher and dmenu replacement that started as a clone of simpleswitcher, written by Sean Pringle and later expanded by Dave Davenport. This command installs and configures rofi with configuration from CTT's DWM repo. https://github.com/ChrisTitusTech/dwm-titus"
 script = "rofi-setup.sh"
 task_list = "I FM"
 
@@ -286,6 +310,6 @@ values = [ "wayland", "Wayland" ]
 
 [[data]]
 name = "ZSH Prompt"
-description = "The Z shell is a Unix shell that can be used as an interactive login shell and as a command interpreter for shell scripting. Zsh is an extended Bourne shell with many improvements, including some features of Bash, ksh, and tcsh.\nThis command installs ZSH prompt and provides basic configuration."
+description = "The Z shell is a Unix shell that can be used as an interactive login shell and as a command interpreter for shell scripting. Zsh is an extended Bourne shell with many improvements, including some features of Bash, ksh, and tcsh. This command installs ZSH prompt and provides basic configuration."
 script = "zsh-setup.sh"
 task_list = "I FM"

core/tabs/applications-setup/waydroid-setup.sh

@@ -15,10 +15,17 @@ installWaydroid() {
         case "$PACKAGER" in
             pacman)
                 "$AUR_HELPER" -S --needed --noconfirm waydroid
-                if command_exists dkms; then
-                    "$AUR_HELPER" -S --needed --noconfirm binder_linux-dkms
-                    "$ESCALATION_TOOL" modprobe binder-linux device=binder,hwbinder,vndbinder
+                if ! command_exists dkms; then
+                    installed_kernels=$("$PACKAGER" -Q | grep -E '^linux(| |-rt|-rt-lts|-hardened|-zen|-lts)[^-headers]' | cut -d ' ' -f 1)
+                    for kernel in $installed_kernels; do
+                        header="${kernel}-headers"
+                        printf "%b\n" "${CYAN}Installing headers for $kernel...${RC}"
+                        "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm "$header"
+                    done
+                    "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm dkms
                 fi
+                "$AUR_HELPER" -S --needed --noconfirm binder_linux-dkms
+                "$ESCALATION_TOOL" modprobe binder-linux device=binder,hwbinder,vndbinder
                 ;;
             apt-get|nala)
                 curl https://repo.waydro.id | "$ESCALATION_TOOL" sh

core/tabs/common-script.sh

@@ -9,7 +9,48 @@ CYAN='\033[36m'
 GREEN='\033[32m'
 
 command_exists() {
-    command -v "$1" >/dev/null 2>&1
+for cmd in "$@"; do
+    export PATH="$HOME/.local/share/flatpak/exports/bin:/var/lib/flatpak/exports/bin:$PATH"
+    command -v "$cmd" >/dev/null 2>&1 || return 1
+done
+return 0
+}
+
+checkFlatpak() {
+    if ! command_exists flatpak; then
+        printf "%b\n" "${YELLOW}Installing Flatpak...${RC}"
+        case "$PACKAGER" in
+            pacman)
+                "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm flatpak
+                ;;
+            apk)
+                "$ESCALATION_TOOL" "$PACKAGER" add flatpak
+                ;;
+            *)
+                "$ESCALATION_TOOL" "$PACKAGER" install -y flatpak
+                ;;
+        esac
+        printf "%b\n" "${YELLOW}Adding Flathub remote...${RC}"
+        "$ESCALATION_TOOL" flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
+        printf "%b\n" "${YELLOW}Applications installed by Flatpak may not appear on your desktop until the user session is restarted...${RC}"
+    else
+        if ! flatpak remotes | grep -q "flathub"; then
+            printf "%b\n" "${YELLOW}Adding Flathub remote...${RC}"
+            "$ESCALATION_TOOL" flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
+        else
+            printf "%b\n" "${CYAN}Flatpak is installed${RC}"
+        fi
+    fi
+}
+
+checkArch() {
+    case "$(uname -m)" in
+        x86_64 | amd64) ARCH="x86_64" ;;
+        aarch64 | arm64) ARCH="aarch64" ;;
+        *) printf "%b\n" "${RED}Unsupported architecture: $(uname -m)${RC}" && exit 1 ;;
+    esac
+
+    printf "%b\n" "${CYAN}System architecture: ${ARCH}${RC}"
 }
 
 checkAURHelper() {
@@ -125,6 +166,7 @@ checkDistro() {
 }
 
 checkEnv() {
+    checkArch
     checkEscalationTool
     checkCommandRequirements "curl groups $ESCALATION_TOOL"
     checkPackageManager 'nala apt-get dnf pacman zypper'

core/tabs/gaming/tab_data.toml

@@ -5,6 +5,6 @@ name = "Diablo II Resurrected"
 
 [[data.entries]]
 name = "Loot Filter"
-description = "This is a loot filter for Diablo II Resurrected.\nIt's designed to be a simple, clean, and easy to read loot filter that highlights the most important items.\nWorks on battle.net and single player.\nNo frills, no config, just highlights high runes and other valuable items.\nFor more information visit: https://github.com/ChrisTitusTech/d2r-loot-filter"
+description = "This is a loot filter for Diablo II Resurrected. It's designed to be a simple, clean, and easy to read loot filter that highlights the most important items. Works on battle.net and single player. No frills, no config, just highlights high runes and other valuable items. For more information visit: https://github.com/ChrisTitusTech/d2r-loot-filter"
 script = "diablo-ii/d2r-loot-filters.sh"
 task_list = "FM"

core/tabs/security/tab_data.toml

@@ -2,6 +2,6 @@ name = "Security"
 
 [[data]]
 name = "Firewall Baselines (CTT)"
-description = "Developed to ease iptables firewall configuration, UFW provides a user friendly way to create an IPv4 or IPv6 host-based firewall.\nThis command installs UFW and configures UFW based on CTT's recommended rules.\nFor more information visit: https://christitus.com/linux-security-mistakes"
+description = "Developed to ease iptables firewall configuration, UFW provides a user friendly way to create an IPv4 or IPv6 host-based firewall. This command installs UFW and configures UFW based on CTT's recommended rules. For more information visit: https://christitus.com/linux-security-mistakes"
 script = "firewall-baselines.sh"
 task_list = "I SS"

core/tabs/system-setup/arch/paru-setup.sh

@@ -8,8 +8,8 @@ installDepend() {
             if ! command_exists paru; then
                 printf "%b\n" "${YELLOW}Installing paru as AUR helper...${RC}"
                 "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm base-devel git
-                cd /opt && "$ESCALATION_TOOL" git clone https://aur.archlinux.org/paru.git && "$ESCALATION_TOOL" chown -R "$USER": ./paru
-                cd paru && makepkg --noconfirm -si
+                cd /opt && "$ESCALATION_TOOL" git clone https://aur.archlinux.org/paru-bin.git && "$ESCALATION_TOOL" chown -R "$USER": ./paru-bin
+                cd paru-bin && makepkg --noconfirm -si
                 printf "%b\n" "${GREEN}Paru installed${RC}"
             else
                 printf "%b\n" "${GREEN}Paru already installed${RC}"

core/tabs/system-setup/arch/server-setup.sh

@@ -386,33 +386,36 @@ fi
 
 if [[ "${FS}" == "btrfs" ]]; then
     mkfs.vfat -F32 -n "EFIBOOT" "${partition2}"
-    mkfs.btrfs -L ROOT "${partition3}" -f
+    mkfs.btrfs -f "${partition3}"
     mount -t btrfs "${partition3}" /mnt
     subvolumesetup
 elif [[ "${FS}" == "ext4" ]]; then
     mkfs.vfat -F32 -n "EFIBOOT" "${partition2}"
-    mkfs.ext4 -L ROOT "${partition3}"
+    mkfs.ext4 "${partition3}"
     mount -t ext4 "${partition3}" /mnt
 elif [[ "${FS}" == "luks" ]]; then
-    mkfs.vfat -F32 -n "EFIBOOT" "${partition2}"
+    mkfs.vfat -F32 "${partition2}"
 # enter luks password to cryptsetup and format root partition
     echo -n "${LUKS_PASSWORD}" | cryptsetup -y -v luksFormat "${partition3}" -
 # open luks container and ROOT will be place holder
     echo -n "${LUKS_PASSWORD}" | cryptsetup open "${partition3}" ROOT -
 # now format that container
-    mkfs.btrfs -L ROOT "${partition3}"
+    mkfs.btrfs "${partition3}"
 # create subvolumes for btrfs
     mount -t btrfs "${partition3}" /mnt
     subvolumesetup
+    ENCRYPTED_PARTITION_UUID=$(blkid -s UUID -o value "${partition3}")
 fi
 
+BOOT_UUID=$(blkid -s UUID -o value "${partition2}")
+
 sync
 if ! mountpoint -q /mnt; then
     echo "ERROR! Failed to mount ${partition3} to /mnt after multiple attempts."
     exit 1
 fi
 mkdir -p /mnt/boot/efi
-mount -t vfat -L EFIBOOT /mnt/boot/
+mount -t vfat -U "${BOOT_UUID}" /mnt/boot/
 
 if ! grep -qs '/mnt' /proc/mounts; then
     echo "Drive is not mounted can not continue"
@@ -435,7 +438,7 @@ fi
 echo "keyserver hkp://keyserver.ubuntu.com" >> /mnt/etc/pacman.d/gnupg/gpg.conf
 cp /etc/pacman.d/mirrorlist /mnt/etc/pacman.d/mirrorlist
 
-genfstab -L /mnt >> /mnt/etc/fstab
+genfstab -U /mnt >> /mnt/etc/fstab
 echo "
   Generated /etc/fstab:
 "
@@ -526,6 +529,9 @@ sed -i 's/^# %wheel ALL=(ALL:ALL) NOPASSWD: ALL/%wheel ALL=(ALL:ALL) NOPASSWD: A
 #Add parallel downloading
 sed -i 's/^#ParallelDownloads/ParallelDownloads/' /etc/pacman.conf
 
+#Set colors and enable the easter egg
+sed -i 's/^#Color/Color\nILoveCandy/' /etc/pacman.conf
+
 #Enable multilib
 sed -i "/\[multilib\]/,/Include/"'s/^#//' /etc/pacman.conf
 pacman -Sy --noconfirm --needed

core/tabs/system-setup/fedora/fedora-btrfs-assistant.sh

@@ -0,0 +1,168 @@
+#!/bin/sh -e
+
+. ../../common-script.sh
+
+# This script automates the installation and root and home snapshot configuration of Snapper and installs Grub-Btrfs on Fedora.
+# Also installs python3-dnf-plugin-snapper package for automatic snapshots after dnf commands.
+
+# Install Btrfs-Assistant/snapper and dependencies
+installBtrfsStack() {
+    if ! command_exists btrfs-assistant; then
+        printf "%b\n" "${YELLOW}==========================================${RC}"
+        printf "%b\n" "${YELLOW}Installing Btrfs Assistant with snapper...${RC}"
+        printf "%b\n" "${YELLOW}==========================================${RC}"
+        case "$PACKAGER" in
+            dnf)
+                "$ESCALATION_TOOL" "$PACKAGER" install -y btrfs-assistant python3-dnf-plugin-snapper
+                ;;
+            *)
+                printf "%b\n" "${RED}Unsupported package manager: ""$PACKAGER""${RC}"
+                exit 1
+                ;;
+        esac
+    else
+        printf "%b\n" "${GREEN}Btrfs Assistant is already installed.${RC}"
+    fi
+}
+
+# Create first snapper config for root and home and create new manual snapshots
+configureSnapper() {
+    printf "%b\n" "${YELLOW}===========================================================================${RC}"
+    printf "%b\n" "${YELLOW}Creating snapper root(/) and /home config and taking the first snapshots...${RC}"
+    printf "%b\n" "${YELLOW}===========================================================================${RC}"
+    "$ESCALATION_TOOL" snapper -c home create-config /home && "$ESCALATION_TOOL" snapper -c home create --description "First home Snapshot"
+    "$ESCALATION_TOOL" snapper -c root create-config / && "$ESCALATION_TOOL" snapper -c root create --description "First root Snapshot"
+    printf "%b\n" "${YELLOW}Updating timeline settings...${RC}"
+    # Modifyling default timeline root config
+    "$ESCALATION_TOOL" sed -i'' '
+        s/^TIMELINE_LIMIT_HOURLY="[^"]*"/TIMELINE_LIMIT_HOURLY="1"/;
+        s/^TIMELINE_LIMIT_DAILY="[^"]*"/TIMELINE_LIMIT_DAILY="2"/;
+        s/^TIMELINE_LIMIT_WEEKLY="[^"]*"/TIMELINE_LIMIT_WEEKLY="1"/;
+        s/^TIMELINE_LIMIT_MONTHLY="[^"]*"/TIMELINE_LIMIT_MONTHLY="0"/;
+        s/^TIMELINE_LIMIT_YEARLY="[^"]*"/TIMELINE_LIMIT_YEARLY="0"/
+    ' /etc/snapper/configs/root
+    # Modifyling default timeline for home config
+    "$ESCALATION_TOOL" sed -i'' '
+        s/^TIMELINE_LIMIT_HOURLY="[^"]*"/TIMELINE_LIMIT_HOURLY="2"/;
+        s/^TIMELINE_LIMIT_DAILY="[^"]*"/TIMELINE_LIMIT_DAILY="1"/;
+        s/^TIMELINE_LIMIT_WEEKLY="[^"]*"/TIMELINE_LIMIT_WEEKLY="0"/;
+        s/^TIMELINE_LIMIT_MONTHLY="[^"]*"/TIMELINE_LIMIT_MONTHLY="1"/;
+        s/^TIMELINE_LIMIT_YEARLY="[^"]*"/TIMELINE_LIMIT_YEARLY="0"/
+    ' /etc/snapper/configs/home
+    printf "%b\n" "${GREEN}Snapper configs and first snapshots created.${RC}"
+}
+
+# Starting services
+serviceStartEnable() {
+    printf "%b\n" "${YELLOW}==================================================================================${RC}"
+    printf "%b\n" "${YELLOW}Starting and enabling snapper-timeline.timer and snapper-cleanup.timer services...${RC}"
+    printf "%b\n" "${YELLOW}==================================================================================${RC}"
+    "$ESCALATION_TOOL" systemctl enable --now snapper-timeline.timer
+    "$ESCALATION_TOOL" systemctl enable --now snapper-cleanup.timer
+    printf "%b\n" "${GREEN}Snapper services started and enabled.${RC}"
+}
+
+# Ask user if they want to install grub-btrfs
+askInstallGrubBtrfs() {
+    printf "%b\n" "${YELLOW}=====================================${RC}"
+    printf "%b\n" "${YELLOW}(optional) grub-btrfs installation...${RC}"
+    printf "%b\n" "${YELLOW}=====================================${RC}"
+    printf "%b\n" "${YELLOW}You can skip installing grub-btrfs and use only Btrfs Assistant GUI or snapper CLI.${RC}"
+    printf "%b\n" "${CYAN}Notice: grub-btrfs may cause problems with booting into snapshots and other OSes on systems with secure boot/tpm. You will be asked to apply mitigation for this issue in next step.${RC}"
+
+    while true; do
+        printf "%b" "${YELLOW}Do you want to install grub-btrfs? Press (y) for yes, (n) for no, (f) to apply tpm mitigation to already installed grub-btrfs: ${RC}"
+        read -r response
+        case "$response" in
+            [yY]*)
+                installGrubBtrfs
+                break
+                ;;
+            [nN]*)
+                printf "%b\n" "${GREEN}Skipping grub-btrfs installation.${RC}"
+                break
+                ;;
+            [fF]*)
+                mitigateTpmError
+                break
+                ;;
+            *)
+                printf "%b\n" "${RED}Invalid input. Please enter 'y' for yes, 'n' for no, or (f) to apply tpm mitigation to already installed grub-btrfs.${RC}"
+                ;;
+        esac
+    done
+}
+
+# Install grub-btrfs
+installGrubBtrfs() {
+    # Check if the grub-btrfs dir exists before attempting to clone into it.
+    printf "%b\n" "${YELLOW}Downloading grub-btrfs and installing dependencies...${RC}"
+    if [ -d "$HOME/grub-btrfs" ]; then
+        rm -rf "$HOME/grub-btrfs"
+    fi
+    "$ESCALATION_TOOL" "$PACKAGER" install -y make git inotify-tools
+    cd "$HOME" && git clone https://github.com/Antynea/grub-btrfs
+    printf "%b\n" "${YELLOW}Installing grub-btrfs...${RC}"
+    cd "$HOME/grub-btrfs"
+    printf "%b\n" "${YELLOW}Modifying grub-btrfs configuration for Fedora...${RC}"
+    sed -i'' '/#GRUB_BTRFS_SNAPSHOT_KERNEL/a GRUB_BTRFS_SNAPSHOT_KERNEL_PARAMETERS="systemd.volatile=state"' config
+    sed -i'' '/#GRUB_BTRFS_GRUB_DIRNAME/a GRUB_BTRFS_GRUB_DIRNAME="/boot/grub2"' config
+    sed -i'' '/#GRUB_BTRFS_MKCONFIG=/a GRUB_BTRFS_MKCONFIG=/sbin/grub2-mkconfig' config
+    sed -i'' '/#GRUB_BTRFS_SCRIPT_CHECK=/a GRUB_BTRFS_SCRIPT_CHECK=grub2-script-check' config
+    "$ESCALATION_TOOL" make install
+    printf "%b\n" "${YELLOW}Updating grub configuration and enabling grub-btrfsd service...${RC}"
+    "$ESCALATION_TOOL" grub2-mkconfig -o /boot/grub2/grub.cfg && "$ESCALATION_TOOL" systemctl enable --now grub-btrfsd.service
+    printf "%b\n" "${YELLOW}Cleaning up installation files...${RC}"
+    cd .. && rm -rf "$HOME/grub-btrfs"
+    printf "%b\n" "${GREEN}Grub-btrfs installed and service enabled.${RC}"
+    printf "%b\n" "${CYAN}Notice: To perform a system recovery via grub-btrfs, perform a restore operation with Btrfs Assistant GUI after booting into the snapshot.${RC}"
+    mitigateTpmError
+}
+
+mitigateTpmError() {
+    printf "%b\n" "${YELLOW}===============================================${RC}"
+    printf "%b\n" "${YELLOW}Mitigation for 'tpm.c:150:unknown TPM error'...${RC}"
+    printf "%b\n" "${YELLOW}===============================================${RC}"
+    printf "%b\n" "${YELLOW}Some systems with secure boot/tpm may encounter 'tpm.c:150:unknown TPM error' when booting into snapshots.${RC}"
+    printf "%b\n" "${YELLOW}If you encounter this issue, you can come back later and apply this mitigation or you can apply it now.${RC}"
+    while true; do
+        printf "%b\n" "${YELLOW}Do you want to apply the TPM error mitigation? (y/n): ${RC}"
+        read -r response
+        case "$response" in
+            [yY]*)
+                printf "%b\n" "${YELLOW}Creating /etc/grub.d/02_tpm file...${RC}"
+                echo '#!/bin/sh' | "$ESCALATION_TOOL" tee /etc/grub.d/02_tpm > /dev/null
+                echo 'echo "rmmod tpm"' | "$ESCALATION_TOOL" tee -a /etc/grub.d/02_tpm > /dev/null
+                "$ESCALATION_TOOL" chmod +x /etc/grub.d/02_tpm # makes the file executable
+                "$ESCALATION_TOOL" grub2-mkconfig -o /boot/grub2/grub.cfg # updates grub config
+                printf "%b\n" "${GREEN}Mitigation applied and grub config updated.${RC}"
+                break
+                ;;
+            [nN]*)
+                printf "%b\n" "${GREEN}Skipping TPM error mitigation.${RC}"
+                break
+                ;;
+            *)
+                printf "%b\n" "${RED}Invalid input. Please enter 'y' for yes or 'n' for no.${RC}"
+                ;;
+        esac
+    done
+}
+
+# Post install information
+someNotices() {
+    printf "%b\n" "${YELLOW}================================NOTICES================================${RC}"
+    printf "%b\n" "${YELLOW}Notice: You can manage snapshots from GUI with Btrfs Assistant or CLI with snapper.${RC}"
+    printf "%b\n" "${YELLOW}Notice: You may change (Hourly, daily, weekly, monthly, yearly) timeline settings with Btrfs Assistant GUI.${RC}"
+    printf "%b\n" "${RED}Notice: If you used the default Fedora disk partitioning during OS installation, the /boot configured as an separate EXT4 partition. Therefore, it cannot be included in root snapshots. Backup separately...${RC}"
+    printf "%b\n" "${YELLOW}================================NOTICES================================${RC}"
+    printf "%b\n" "${GREEN}Setup process completed.${RC}"
+}
+
+checkEnv
+checkEscalationTool
+installBtrfsStack
+configureSnapper
+serviceStartEnable
+askInstallGrubBtrfs
+someNotices

core/tabs/system-setup/fedora/fedora-upgrade.sh

@@ -0,0 +1,83 @@
+#!/bin/sh -e
+
+. ../../common-script.sh
+
+current_version=$(rpm -E '%{fedora}')
+next_version=$((current_version + 1))
+
+update() {
+    printf "%b\n" "${YELLOW}Make sure your system is fully updated; if not, update it first and reboot once.${RC}"
+    printf "%b\n" "${CYAN}Your current Fedora version is $current_version.${RC}"
+    printf "%b\n" "${CYAN}The next available version is $next_version.${RC}"
+    
+    printf "%b\n" "${YELLOW}Do you want to update to $next_version? (y/n): ${RC}"  
+    read -r response
+    
+    case "$response" in
+        y|Y)
+            printf "%b\n" "${CYAN}Preparing to update to $next_version...${RC}"
+        
+            if ! "$ESCALATION_TOOL" "$PACKAGER" install dnf-plugin-system-upgrade -y; then
+                printf "%b\n" "${RED}Failed to install dnf-plugin-system-upgrade.${RC}"
+                exit 1
+            fi
+        
+            if ! "$ESCALATION_TOOL" "$PACKAGER" system-upgrade download --releasever="$next_version" -y ; then
+                printf "%b\n" "${RED}Failed to download the upgrade packages.${RC}"
+                exit 1
+            fi
+
+            printf "%b\n" "${YELLOW}Do you want to reboot now to apply the upgrade? (y/n): ${RC}"
+            read -r reboot_response
+
+            case "$reboot_response" in
+                y|Y)
+                    printf "%b\n" "${YELLOW}Rebooting to apply the upgrade...${RC}"
+                    "$ESCALATION_TOOL" "$PACKAGER" system-upgrade reboot
+                    ;;
+                *)
+                    printf "%b\n" "${YELLOW}You can reboot later to apply the upgrade.${RC}"
+                    ;;
+            esac
+            ;;
+        *)
+            printf "%b\n" "${RED}No upgrade performed.${RC}"
+            ;;
+    esac
+}
+
+post_upgrade() {
+    printf "%b\n" "${YELLOW}Running post-upgrade tasks...${RC}"
+    
+    case "$PACKAGER" in
+        dnf)
+            "$ESCALATION_TOOL" "$PACKAGER" autoremove  
+            "$ESCALATION_TOOL" "$PACKAGER" distro-sync -y
+            ;;
+        *)
+            printf "%b\n" "${RED}Unsupported package manager: $PACKAGER.${RC}"
+            exit 1
+            ;;
+    esac
+}
+
+checkEnv
+checkEscalationTool
+
+printf "%b\n" "${YELLOW}Select an option:${RC}"
+printf "%b\n" "${GREEN}1. Upgrade to the next Fedora version${RC}"
+printf "%b\n" "${GREEN}2. Run post-upgrade tasks${RC}"
+read -r choice
+
+case "$choice" in
+    1)
+        update
+        ;;
+    2)
+        post_upgrade
+        ;;
+    *)
+        printf "%b\n" "${RED}Invalid option. Please select 1 or 2.${RC}"
+        exit 1
+        ;;
+esac

core/tabs/system-setup/gaming-setup.sh

@@ -21,12 +21,12 @@ installDepend() {
                 alsa-utils alsa-plugins lib32-alsa-plugins alsa-lib lib32-alsa-lib giflib lib32-giflib libpng lib32-libpng \
                 libldap lib32-libldap openal lib32-openal libxcomposite lib32-libxcomposite libxinerama lib32-libxinerama \
                 ncurses lib32-ncurses vulkan-icd-loader lib32-vulkan-icd-loader ocl-icd lib32-ocl-icd libva lib32-libva \
-                gst-plugins-base-libs lib32-gst-plugins-base-libs sdl2"
+                gst-plugins-base-libs lib32-gst-plugins-base-libs sdl2 lib32-sdl2 v4l-utils lib32-v4l-utils sqlite lib32-sqlite"
 
             $AUR_HELPER -S --needed --noconfirm $DEPENDENCIES $DISTRO_DEPS
             ;;
         apt-get|nala)
-            DISTRO_DEPS="libasound2 libsdl2 wine64 wine32"
+            DISTRO_DEPS="libasound2-plugins:i386 libsdl2-2.0-0:i386 libdbus-1-3:i386 libsqlite3-0:i386 wine64 wine32"
 
             "$ESCALATION_TOOL" "$PACKAGER" update
             "$ESCALATION_TOOL" dpkg --add-architecture i386

core/tabs/system-setup/system-cleanup.sh

@@ -8,9 +8,7 @@ cleanup_system() {
         apt-get|nala)
             "$ESCALATION_TOOL" "$PACKAGER" clean
             "$ESCALATION_TOOL" "$PACKAGER" autoremove -y 
-            "$ESCALATION_TOOL" "$PACKAGER" autoclean
             "$ESCALATION_TOOL" du -h /var/cache/apt
-            "$ESCALATION_TOOL" "$PACKAGER" clean
             ;;
         zypper)
             "$ESCALATION_TOOL" "$PACKAGER" clean -a

core/tabs/system-setup/tab_data.toml

@@ -1,5 +1,4 @@
 name = "System Setup"
-multi_selectable = false
 
 [[data]]
 name = "Arch Linux"
@@ -14,6 +13,7 @@ name = "Arch Server Setup"
 description = "This command installs a minimal arch server setup under 5 minutes."
 script = "arch/server-setup.sh"
 task_list = "SI D"
+multi_select = false
 
 [[data.entries]]
 name ="Linux Neptune for SteamDeck"
@@ -28,13 +28,13 @@ values = [ "Valve" ]
 
 [[data.entries]]
 name = "Paru AUR Helper"
-description = "Paru is your standard pacman wrapping AUR helper with lots of features and minimal interaction.\nTo know more about AUR helpers visit: https://wiki.archlinux.org/title/AUR_helpers"
+description = "Paru is your standard pacman wrapping AUR helper with lots of features and minimal interaction. To know more about AUR helpers visit: https://wiki.archlinux.org/title/AUR_helpers"
 script = "arch/paru-setup.sh"
 task_list = "I"
 
 [[data.entries]]
 name = "Yay AUR Helper"
-description = "Yet Another Yogurt - An AUR Helper Written in Go.\nTo know more about AUR helpers visit: https://wiki.archlinux.org/title/AUR_helpers"
+description = "Yet Another Yogurt - An AUR Helper Written in Go. To know more about AUR helpers visit: https://wiki.archlinux.org/title/AUR_helpers"
 script = "arch/yay-setup.sh"
 task_list = "I"
 
@@ -66,16 +66,33 @@ task_list = "I"
 
 [[data.entries]]
 name = "RPM Fusion"
-description = "RPM Fusion provides software that the Fedora Project or Red Hat doesn't want to ship.\nThat software is provided as precompiled RPMs for all current Fedora versions and current Red Hat Enterprise Linux or clones versions; you can use the RPM Fusion repositories with tools like yum and PackageKit.\nFor more information visit: https://rpmfusion.org/"
+description = "RPM Fusion provides software that the Fedora Project or Red Hat doesn't want to ship. That software is provided as precompiled RPMs for all current Fedora versions and current Red Hat Enterprise Linux or clones versions; you can use the RPM Fusion repositories with tools like yum and PackageKit. For more information visit: https://rpmfusion.org/"
 script = "fedora/rpm-fusion-setup.sh"
 task_list = "MP"
 
+[[data.entries]]
+name = "Upgrade to a New Fedora Release"
+description = "Upgrades system to the next Fedora release"
+script = "fedora/fedora-upgrade.sh"
+task_list = "MP"
+
 [[data.entries]]
 name = "Virtualization"
 description = "Enables Virtualization through dnf"
 script = "fedora/virtualization.sh"
 task_list = "I"
 
+[[data.entries]]
+name = "Btrfs Assistant, Snapper Config, grub-btrfs"
+description = "Installs Btrfs Assistant, Snapper, dnf snapper plugin and takes the first root(/) and /home snapshots. Enables snapper-timeline and snapper-cleanup services. Installs Grub-Btrfs. Notice: To perform a system recovery via grub-btrfs, perform a restore operation with Btrfs Assistant GUI after booting into the snapshot. Notice: If you used the default Fedora disk partitioning during OS installation, the /boot configured as an separate EXT4 partition. Therefore, it cannot be included in root snapshots. Backup separately."
+script = "fedora/fedora-btrfs-assistant.sh"
+task_list = "I PFM SS"
+
+[[data.preconditions]]
+matches = true
+data = "command_exists"
+values = [ "btrfs" ]
+
 [[data]]
 name = "Build Prerequisites"
 description = "This script is designed to handle the installation of various software dependencies across different Linux distributions"
@@ -87,12 +104,14 @@ name = "Full System Cleanup"
 description = "This script is designed to remove unnecessary packages, clean old cache files, remove temporary files, and to empty the trash."
 script = "system-cleanup.sh"
 task_list = "RP PFM"
+multi_select = false
 
 [[data]]
 name = "Full System Update"
 description = "This command updates your system to the latest packages available for your distro"
 script = "system-update.sh"
 task_list = "PFM"
+multi_select = false
 
 [[data]]
 name = "Gaming Dependencies"

core/tabs/utils/create-bootable-usb.sh

@@ -2,12 +2,7 @@
 
 . ../common-script.sh  
 
-# Function to display usage instructions
-usage() {
-    printf "%b\n" "${RED} Usage: $0 ${RC}"
-    printf "%b\n" "No arguments needed. The script will prompt for ISO path and USB device."
-    exit 1
-}
+CONFIGURATION_URL="https://github.com/quickemu-project/quickget_configs/releases/download/daily/quickget_data.json"
 
 # Function to display all available block devices
 list_devices() {
@@ -17,53 +12,23 @@ list_devices() {
     printf "\n"
 }
 
-# Function to fetch the latest Arch Linux ISO
-fetch_arch_latest_iso() {
-    ARCH_BASE_URL="https://archive.archlinux.org/iso/"
-    ARCH_LATEST=$(curl -s "$ARCH_BASE_URL" | grep -oP '(?<=href=")[0-9]{4}\.[0-9]{2}\.[0-9]{2}(?=/)' | sort -V | tail -1)
-    ARCH_URL="${ARCH_BASE_URL}${ARCH_LATEST}/archlinux-${ARCH_LATEST}-x86_64.iso"
-    printf "%b\n" "${GREEN} Selected Arch Linux (latest) ISO URL: ${RC} $ARCH_URL"
-}
-
-# Function to fetch older Arch Linux ISOs and display in a table format
-fetch_arch_older_isos() {
-    ARCH_BASE_URL="https://archive.archlinux.org/iso/"
-    ARCH_VERSIONS=$(curl -s "$ARCH_BASE_URL" | grep -oP '(?<=href=")[0-9]{4}\.[0-9]{2}\.[0-9]{2}(?=/)' | sort -V)
-
-    # Filter versions to include only those from 2017-04-01 and later
-    MIN_DATE="2017.04.01"
-    ARCH_VERSIONS=$(echo "$ARCH_VERSIONS" | awk -v min_date="$MIN_DATE" '$0 >= min_date')
-
-    if [ -z "$ARCH_VERSIONS" ]; then
-        printf "%b\n" "${RED}No Arch Linux versions found from ${MIN_DATE} onwards.${RC}"
-        exit 1
+installDependencies() {
+    DEPENDENCIES="xz gzip bzip2 jq"
+    if ! command_exists ${DEPENDENCIES}; then
+        printf "%b\n" "${YELLOW}Installing dependencies...${RC}"
+        case "${PACKAGER}" in
+            apt-get|nala)
+                "${ESCALATION_TOOL}" "${PACKAGER}" install -y xz-utils gzip bzip2 jq;;
+            dnf|zypper)
+                "${ESCALATION_TOOL}" "${PACKAGER}" install -y ${DEPENDENCIES};;
+            pacman)
+                "${ESCALATION_TOOL}" "${PACKAGER}" -S --noconfirm --needed ${DEPENDENCIES};;
+            *)
+                printf "%b\n" "${RED}Unsupported package manager.${RC}"
+                exit 1
+                ;;
+        esac
     fi
-
-    printf "%b\n" "${YELLOW}Available Arch Linux versions from ${MIN_DATE} onwards:${RC}"
-    
-    COUNTER=1
-    ROW_ITEMS=6  # Number of versions to show per row
-    for VERSION in $ARCH_VERSIONS; do
-        printf "%-5s${YELLOW}%-15s ${RC}" "$COUNTER)" "$VERSION"
-        
-        if [ $(( COUNTER % ROW_ITEMS )) -eq 0 ]; then
-            printf "\n"  # New line after every 6 versions
-        fi
-        
-        COUNTER=$((COUNTER + 1))
-    done
-    printf "\n"  # New line after the last row
-    printf "%b" "Select an Arch Linux version (1-$((COUNTER - 1))): "
-    read -r ARCH_OPTION
-    ARCH_DIR=$(echo "$ARCH_VERSIONS" | sed -n "${ARCH_OPTION}p")
-    ARCH_URL="${ARCH_BASE_URL}${ARCH_DIR}/archlinux-${ARCH_DIR}-x86_64.iso"
-    printf "%b\n" "${GREEN}Selected Arch Linux (older) ISO URL: $ARCH_URL${RC}"
-}
-
-# Function to fetch the latest Debian Linux ISO
-fetch_debian_latest_iso() {
-    DEBIAN_URL=$(curl -s https://www.debian.org/distrib/netinst | grep -oP '(?<=href=")[^"]+debian-[0-9.]+-amd64-netinst.iso(?=")' | head -1)
-    printf "%b\n" "${GREEN} Selected Debian Linux (latest) ISO URL: ${RC} $DEBIAN_URL"
 }
 
 # Function to ask whether to use local or online ISO
@@ -77,7 +42,7 @@ choose_iso_source() {
 
     case $ISO_SOURCE_OPTION in
         1)
-            fetch_iso_urls  # Call the function to fetch online ISO URLs
+            get_online_iso
             ;;
         2)
             printf "Enter the path to the already downloaded ISO file: "
@@ -94,45 +59,156 @@ choose_iso_source() {
     esac
 }
 
-# Function to fetch ISO URLs
-fetch_iso_urls() {
-    clear
-    printf "%b\n" "${YELLOW}Available ISOs for download:${RC}"
-    printf "%b\n" "1) Arch Linux (latest)"
-    printf "%b\n" "2) Arch Linux (older versions)"
-    printf "%b\n" "3) Debian Linux (latest)"
-    printf "\n"
-    printf "%b" "Select the ISO you want to download (1-3): "
-    read -r ISO_OPTION
-
-    case $ISO_OPTION in
-        1)
-            fetch_arch_latest_iso
-            ISO_URL=$ARCH_URL
-            ;;
-        2)
-            fetch_arch_older_isos
-            ISO_URL=$ARCH_URL
-            ;;
-        3)
-            fetch_debian_latest_iso
-            ISO_URL=$DEBIAN_URL
-            ;;
+decompress_iso() {
+    printf "%b\n" "${YELLOW}Decompressing ISO file...${RC}"
+    case "${ISO_ARCHIVE_FORMAT}" in
+        xz)
+            xz -d "${ISO_PATH}"
+            ISO_PATH="$(echo "${ISO_PATH}" | sed 's/\.xz//')";;
+        gz)
+            gzip -d "${ISO_PATH}"
+            ISO_PATH="$(echo "${ISO_PATH}" | sed 's/\.gz//')";;
+        bz2)
+            bzip2 -d "${ISO_PATH}"
+            ISO_PATH="$(echo "${ISO_PATH}" | sed 's/\.bz2//')";;
         *) 
-            printf "%b\n" "${RED}Invalid option selected.${RC}"
+            printf "%b\n" "${RED}Unsupported archive format. Try manually decompressing the ISO and choosing it as a local file instead.${RC}"
             exit 1
             ;;
     esac
 
-    ISO_PATH=$(basename "$ISO_URL")
-    printf "%b\n" "${YELLOW}Downloading ISO...${RC}"
-    curl -L -o "$ISO_PATH" "$ISO_URL"
-    if [ $? -ne 0 ]; then
+    printf "%b\n" "${GREEN}ISO file decompressed successfully.${RC}"
+}
+
+check_hash() {
+    case "${#ISO_CHECKSUM}" in
+        32) HASH_ALGO="md5sum";;
+        40) HASH_ALGO="sha1sum";;
+        64) HASH_ALGO="sha256sum";;
+        128) HASH_ALGO="sha512sum";;
+        *) printf "%b\n" "${RED}Invalid checksum length. Skipping checksum verification.${RC}"
+            return;;
+    esac
+    printf "%b\n" "Checking ISO integrity using ${HASH_ALGO}..."
+    if ! echo "${ISO_CHECKSUM} ${ISO_PATH}" | "${HASH_ALGO}" --check --status; then
+        printf "%b\n" "${RED}Checksum verification failed.${RC}"
+        exit 1
+    else
+        printf "%b\n" "${GREEN}Checksum verification successful.${RC}"
+    fi
+}
+
+download_iso() {
+    printf "\n%b\n" "${YELLOW}Found URL: ${ISO_URL}${RC}"
+    printf "%b\n" "${YELLOW}Downloading ISO to ${ISO_PATH}...${RC}"
+    if ! curl -L -o "$ISO_PATH" "$ISO_URL"; then
         printf "%b\n" "${RED}Failed to download the ISO file.${RC}"
         exit 1
     fi
 }
 
+get_architecture() {
+    printf "%b\n" "${YELLOW}Select the architecture of the ISO to flash${RC}"
+    printf "%b\n" "1) x86_64"
+    printf "%b\n" "2) AArch64"
+    printf "%b\n" "3) riscv64"
+    printf "%b" "Select an option (1-3): "
+    read -r ARCH
+    case "${ARCH}" in
+        1) ARCH="x86_64";;
+        2) ARCH="aarch64";;
+        3) ARCH="riscv64";;
+        *)
+            printf "%b\n" "${RED}Invalid architecture selected. ${RC}"
+            exit 1
+            ;;
+    esac
+}
+
+comma_delimited_list() {
+    echo "${1}" | tr '\n' ',' | sed 's/,/, /g; s/, $//'
+}
+
+get_online_iso() {
+    get_architecture
+    printf "%b\n" "${YELLOW}Fetching available operating systems...${RC}"
+    clear
+
+    # Download available operating systems, filter to to those that match requirements
+    # Remove entries with more than 1 ISO or any other medium, they could cause issues
+    OS_JSON="$(curl -L -s "$CONFIGURATION_URL" | jq -c "[.[] | \
+        .releases |= map(select( \
+        (.arch // \"x86_64\") == "\"${ARCH}\"" \
+        and (.iso | length == 1) and (.iso[0] | has(\"web\")) \
+        and .img == null and .fixed_iso == null and .floppy == null and .disk_images == null)) \
+        | select(.releases | length > 0)]")"
+
+    if echo "${OS_JSON}" | jq -e 'length == 0' >/dev/null; then
+        printf "%b\n" "${RED}No operating systems found.${RC}"
+        exit 1
+    fi
+
+    printf "%b\n" "${YELLOW}Available Operating Systems:${RC}"
+    comma_delimited_list "$(echo "${OS_JSON}" | jq -r '.[].name')"
+    printf "\n%b" "Select an operating system: "
+    read -r OS
+
+    OS_JSON="$(echo "${OS_JSON}" | jq --arg os "${OS}" -c '.[] | select(.name == $os)')"
+    if [ -z "${OS_JSON}" ]; then
+        printf "%b\n" "${RED}Invalid operating system selected.${RC}"
+        exit 1
+    fi
+    PRETTY_NAME="$(echo "${OS_JSON}" | jq -r '.pretty_name')"
+
+    printf "\n%b\n" "${YELLOW}Available releases for ${PRETTY_NAME}:${RC}"
+    comma_delimited_list "$(echo "${OS_JSON}" | jq -r '.releases[].release' | sort -Vur)"
+    printf "\n%b" "Select a release: "
+    read -r RELEASE
+    printf "\n"
+
+    OS_JSON="$(echo "${OS_JSON}" | jq --arg release "${RELEASE}" -c '.releases |= map(select(.release == $release))')"
+    if echo "${OS_JSON}" | jq -e '.releases | length == 0' >/dev/null; then
+        printf "%b\n" "${RED}Invalid release selected.${RC}"
+        exit 1
+    fi
+
+    if echo "${OS_JSON}" | jq -e '.releases[] | select(.edition != null) | any' >/dev/null; then
+        printf "%b\n" "${YELLOW}Available editions for ${PRETTY_NAME} ${RELEASE}:${RC}"
+        comma_delimited_list "$(echo "${OS_JSON}" | jq -r '.releases[].edition' | sort -Vur)"
+        printf "\n%b" "Select an edition: "
+        read -r EDITION
+        ENTRY="$(echo "${OS_JSON}" | jq --arg edition "${EDITION}" -c '.releases[] | select(.edition == $edition)')"
+    else
+        ENTRY="$(echo "${OS_JSON}" | jq -c '.releases[0]')"
+    fi
+
+    if [ -z "${ENTRY}" ]; then
+        printf "%b\n" "${RED}Invalid edition selected.${RC}"
+        exit 1
+    fi
+
+    WEB_DATA="$(echo "${ENTRY}" | jq -c '.iso[0].web')"
+
+    ISO_URL="$(echo "${WEB_DATA}" | jq -r '.url')"
+    ISO_CHECKSUM="$(echo "${WEB_DATA}" | jq -r '.checksum')"
+    ISO_ARCHIVE_FORMAT="$(echo "${WEB_DATA}" | jq -r '.archive_format')"
+
+    ISO_FILENAME="$(echo "${WEB_DATA}" | jq -r '.file_name')"
+    if [ "${ISO_FILENAME}" = "null" ]; then
+        ISO_FILENAME="$(basename "${ISO_URL}")"
+    fi
+
+    ISO_PATH="${HOME}/Downloads/${ISO_FILENAME}"
+    download_iso
+
+    if [ "${ISO_CHECKSUM}" != "null" ]; then
+        check_hash
+    fi
+    if [ "${ISO_ARCHIVE_FORMAT}" != "null" ]; then
+        decompress_iso
+    fi
+}
+
 write_iso(){  
     clear
 
@@ -191,4 +267,5 @@ write_iso(){
 
 checkEnv
 checkEscalationTool
+installDependencies
 write_iso

core/tabs/utils/encrypt_decrypt_tool.sh

@@ -8,7 +8,7 @@ printf "%b\n" "${YELLOW}Ensuring OpenSSL is installed...${RC}"
 if ! command_exists openssl; then
     case "$PACKAGER" in
         pacman)
-            "$ESCALATION_TOOL" "$PACKAGER" -Syu --noconfirm openssl
+            "$ESCALATION_TOOL" "$PACKAGER" -S --noconfirm --needed openssl
             ;;
         apt-get|nala)
             "$ESCALATION_TOOL" "$PACKAGER" install -y openssl

core/tabs/utils/monitor-control/set_brightness.sh

@@ -6,8 +6,6 @@
 adjust_monitor_brightness() {
     while true; do
         monitor_list=$(detect_connected_monitors)
-        monitor_array=$(echo "$monitor_list" | tr '\n' ' ')
-        set -- "$monitor_array"
         count=1
 
         clear
@@ -15,7 +13,7 @@ adjust_monitor_brightness() {
         printf "%b\n" "${YELLOW}  Adjust Monitor Brightness${RC}"
         printf "%b\n" "${YELLOW}=========================================${RC}"
         printf "%b\n" "${YELLOW}Choose a monitor to adjust brightness:${RC}"
-        for monitor in "$@"; do
+        echo "$monitor_list" | while IFS= read -r monitor; do
             echo "$count. $monitor"
             count=$((count + 1))
         done
@@ -35,18 +33,18 @@ adjust_monitor_brightness() {
             continue
         fi
 
-        if [ "$monitor_choice" -lt 1 ] || [ "$monitor_choice" -gt "$#" ]; then
+        monitor_count=$(echo "$monitor_list" | wc -l)
+        if [ "$monitor_choice" -lt 1 ] || [ "$monitor_choice" -gt "$monitor_count" ]; then
             printf "%b\n" "${RED}Invalid selection. Please try again.${RC}"
             printf "Press [Enter] to continue..."
             read -r dummy
             continue
         fi
 
-        monitor_name=$(eval echo "\${$monitor_choice}")
+        monitor_name=$(echo "$monitor_list" | sed -n "${monitor_choice}p")
         current_brightness=$(get_current_brightness "$monitor_name")
 
-        # Correctly calculate the brightness percentage
-        current_brightness_percentage=$(awk "BEGIN {printf \"%.0f\", $current_brightness * 100}")
+        current_brightness_percentage=$(awk -v brightness="$current_brightness" 'BEGIN {printf "%.0f", brightness * 100}')
         printf "%b\n" "${YELLOW}Current brightness for $monitor_name${RC}: ${GREEN}$current_brightness_percentage%${RC}"
 
         while true; do

core/tabs/utils/numlock.sh

@@ -2,11 +2,6 @@
 
 . ../common-script.sh
 
-# setleds can be used in all distros
-# This method works by calling a script using systemd service
-
-# Create a script to toggle numlock
-
 create_file() {
   printf "%b\n" "Creating script..."
   "$ESCALATION_TOOL" tee "/usr/local/bin/numlock" >/dev/null <<'EOF'
@@ -21,7 +16,6 @@ EOF
   "$ESCALATION_TOOL" chmod +x /usr/local/bin/numlock
 }
 
-# Create a systemd service to run the script on boot
 create_service() {
   printf "%b\n" "Creating service..."
   "$ESCALATION_TOOL" tee "/etc/systemd/system/numlock.service" >/dev/null <<'EOF'
@@ -39,7 +33,6 @@ EOF
 }
 
 numlockSetup() {
-  # Check if the script and service files exists
   if [ ! -f "/usr/local/bin/numlock" ]; then
     create_file
   fi

core/tabs/utils/ssh.sh

@@ -4,14 +4,15 @@
 
 # Check if ~/.ssh/config exists, if not, create it
 if [ ! -f ~/.ssh/config ]; then
-    touch ~/.ssh/config
-    chmod 600 ~/.ssh/config
+    mkdir -p "$HOME/.ssh"
+    touch "$HOME/.ssh/config"
+    chmod 600 "$HOME/.ssh/config"
 fi
 
 # Function to show available hosts from ~/.ssh/config
 show_available_hosts() {
     printf "%b\n" "Available Systems:"
-    grep -E "^Host " ~/.ssh/config | awk '{print $2}'
+    grep -E "^Host " "$HOME/.ssh/config" | awk '{print $2}'
     printf "%b\n" "-------------------"
 }
 

core/tabs/utils/tab_data.toml

@@ -1,8 +1,8 @@
 name = "Utilities"
-multi_selectable = false
 
 [[data]]
 name = "Monitor Control"
+multi_select = false
 
 [[data.preconditions]]
 matches = true
@@ -78,6 +78,7 @@ script = "monitor-control/set_resolutions.sh"
 
 [[data]]
 name = "User Account Manager"
+multi_select = false
 
 [[data.entries]]
 name = "Add User"
@@ -104,6 +105,7 @@ name = "Auto Mount Drive"
 description = "This utility is designed to help with automating the process of mounting a drive on to your system."
 script = "auto-mount.sh"
 task_list = "PFM"
+multi_select = false
 
 [[data]]
 name = "Auto Login"
@@ -120,6 +122,7 @@ name = "Bluetooth Manager"
 description = "This utility is designed to manage bluetooth in your system"
 script = "bluetooth-control.sh"
 task_list = "I SS"
+multi_select = false
 
 [[data]]
 name = "Bootable USB Creator"
@@ -133,7 +136,7 @@ task_list = "I FM"
 
 [[data]]
 name = "Numlock on Startup"
-description = "This utility is designed to configure auto enabling of numlock on boot"
+description = "This utility is designed to enable Num Lock at boot, rather than within desktop environments like KDE or GNOME"
 script = "numlock.sh"
 task_list = "PFM SS"
 
@@ -164,6 +167,11 @@ name = "Timeshift Backup"
 script = "timeshift.sh"
 task_list = "I"
 
+[[data.preconditions]]
+matches = false
+data = "command_exists"
+values = [ "dnf" ]
+
 [[data]]
 name = "WiFi Manager"
 description = "This utility is designed to manage wifi in your system"

docs/roadmap.md

@@ -5,19 +5,23 @@
 
 ## Goals
 - [ ] Focus on tasks that take time in Linux and automate them. (Example: Removing a user, adding a user, etc. - but mostly BASH scripts with POSIX compliance.)
-- [ ] Remove Binary linutil from being tracked in git and make it a github action.
+- [x] Remove Binary linutil from being tracked in git and make it a github action.
 - [ ] Document every function and feature of linutil. (Preview panel description addition)
 - [x] Create a discord server for linutil and invite the community.
-- [ ] Power Optimizations for Laptops
+- [x] Power Optimizations for Laptops
 
 ## Milestones
-### Q3 2024
-- [ ] Finish the foundation of the project in CLI mode.
-- [ ] DENY ALL GUI Pull Requests while CLI and foundation is being established.
-
 ### Q4 2024
+- [x] Finish the foundation of the project's CLI
+- [ ] Implement CLI arguments and configuration support
+- [ ] Add an option for logging script executions
+
+### Q1 2025
 - [ ] GUI Brainstorming and Planning
-- [ ] GUI Implementation towards the end of Q4
+- [ ] Basic GUI Implementation
+
+### Q2 2025
+- [ ] Full GUI Implementation
 
 ## Community Feedback
 - Encourage community input and suggestions for future development.

docs/userguide.md

@@ -4,19 +4,6 @@
 ## Applications Setup
 
 
-### Developer Tools
-
-- **Github Desktop**: GitHub Desktop is a user-friendly application that simplifies the process of managing Git repositories and interacting with GitHub, providing a graphical interface for tasks like committing, branching, and syncing changes.
-- **Neovim**: Neovim is a refactor, and sometimes redactor, in the tradition of Vim.
-It is not a rewrite but a continuation and extension of Vim.
-This command configures neovim from CTT's neovim configuration.
-https://github.com/ChrisTitusTech/neovim
-- **Sublime Text**: Sublime Text is a fast, lightweight, and customizable text editor known for its simplicity, powerful features, and wide range of plugins for various programming languages.
-- **VS Code**: Visual Studio Code (VS Code) is a lightweight, open-source code editor with built-in support for debugging, version control, and extensions for various programming languages and frameworks.
-- **VS Codium**: VSCodium is a free, open-source version of Visual Studio Code (VS Code) that removes Microsoft-specific telemetry and branding.
-- **Meld**: Meld is a visual diff and merge tool that helps compare files, directories, and version-controlled projects.
-- **Ngrok**: Ngrok is a tool that creates secure, temporary tunnels to expose local servers to the internet for testing and development.
-
 ### Communication Apps
 
 - **Discord**: Discord is a versatile communication platform for gamers and communities, offering voice, video, and text chat features.
@@ -24,8 +11,22 @@ https://github.com/ChrisTitusTech/neovim
 - **Signal**: Signal is a privacy-focused messaging app that provides end-to-end encryption for secure text, voice, and video communication.
 - **Slack**: Slack is a collaboration platform designed for team communication, featuring channels, direct messaging, file sharing, and integrations with various productivity tools.
 - **Telegram**: Telegram is a cloud-based messaging app known for its speed and security, offering features like group chats, channels, and end-to-end encrypted calls.
-- **Zoom**: Zoom is a widely-used video conferencing platform that allows users to host virtual meetings, webinars, and online collaboration with features like screen sharing and recording.
 - **Thunderbird**: Thunderbird is a free, open-source email client that offers powerful features like customizable email management, a built-in calendar, and extensive add-ons for enhanced functionality.
+- **Zoom**: Zoom is a widely-used video conferencing platform that allows users to host virtual meetings, webinars, and online collaboration with features like screen sharing and recording.
+
+### Developer Tools
+
+- **Github Desktop**: GitHub Desktop is a user-friendly application that simplifies the process of managing Git repositories and interacting with GitHub, providing a graphical interface for tasks like committing, branching, and syncing changes.
+- **JetBrains Toolbox**: JetBrains Toolbox is a collection of tools and an app that help developers work with JetBrains products.
+- **Meld**: Meld is a visual diff and merge tool that helps compare files, directories, and version-controlled projects.
+- **Neovim**: Neovim is a refactor, and sometimes redactor, in the tradition of Vim.
+It is not a rewrite but a continuation and extension of Vim.
+This command configures neovim from CTT's neovim configuration.
+https://github.com/ChrisTitusTech/neovim
+- **Ngrok**: Ngrok is a tool that creates secure, temporary tunnels to expose local servers to the internet for testing and development.
+- **Sublime Text**: Sublime Text is a fast, lightweight, and customizable text editor known for its simplicity, powerful features, and wide range of plugins for various programming languages.
+- **VS Code**: Visual Studio Code (VS Code) is a lightweight, open-source code editor with built-in support for debugging, version control, and extensions for various programming languages and frameworks.
+- **VS Codium**: VSCodium is a free, open-source version of Visual Studio Code (VS Code) that removes Microsoft-specific telemetry and branding.
 
 ### Office Suites
 
@@ -43,15 +44,12 @@ https://github.com/ChrisTitusTech/neovim
 - **Mozilla Firefox**: Mozilla Firefox is a free and open-source web browser developed by the Mozilla Foundation.
 - **Thorium**: Thorium is a Chromium-based browser focused on privacy and performance.
 - **Vivaldi**: Vivaldi is a freeware, cross-platform web browser developed by Vivaldi Technologies.
-- **Alacritty**: Alacritty is a modern terminal emulator that comes with sensible defaults, but allows for extensive configuration. By integrating with other applications, rather than reimplementing their functionality, it manages to provide a flexible set of features with high performance. The supported platforms currently consist of BSD, Linux, macOS and Windows.
-This command installs and condifures alacritty terminal emulator.
+- **waterfox**: Waterfox is the privacy-focused web browser engineered to give you speed, control, and peace of mind on the internet.
+- **Alacritty**: Alacritty is a modern terminal emulator that comes with sensible defaults, but allows for extensive configuration. By integrating with other applications, rather than reimplementing their functionality, it manages to provide a flexible set of features with high performance. The supported platforms currently consist of BSD, Linux, macOS and Windows. This command installs and configures alacritty terminal emulator.
 - **Android Debloater**: Universal Android Debloater (UAD) is a tool designed to help users remove bloatware and unnecessary pre-installed applications from Android devices, enhancing performance and user experience.
-- **Bash Prompt**: The .bashrc file is a script that runs every time a new terminal session is started in Unix-like operating systems.
-It is used to configure the shell session, set up aliases, define functions, and more, making the terminal easier to use and more powerful.
-This command configures the key sections and functionalities defined in the .bashrc file from CTT's mybash repository.
-https://github.com/ChrisTitusTech/mybash
-- **Bottles**: Bottles allows Windows software, like applications and games, to run on Linux.
-Bottles also provides tools to categorize, organize and optimize your applications.
+- **Bash Prompt**: The .bashrc file is a script that runs every time a new terminal session is started in Unix-like operating systems. It is used to configure the shell session, set up aliases, define functions, and more, making the terminal easier to use and more powerful. This command configures the key sections and functionalities defined in the .bashrc file from CTT's mybash repository. https://github.com/ChrisTitusTech/mybash
+- **Bottles**: Bottles allows Windows software, like applications and games, to run on Linux. Bottles also provides tools to categorize, organize and optimize your applications.
+- **Docker**: Docker is an open platform that uses OS-level virtualization to deliver software in packages called containers.
 - **DWM-Titus**: DWM is a dynamic window manager for X.
 It manages windows in tiled, monocle and floating layouts.
 All of the layouts can be applied dynamically, optimising the environment for the application in use and the task performed.
@@ -59,41 +57,28 @@ This command installs and configures DWM and a desktop manager.
 The list of patches applied can be found in CTT's DWM repository
 https://github.com/ChrisTitusTech/dwm-titus
 - **Docker**: Docker is an open platform that uses OS-level virtualization to deliver software in packages called containers.
-- **Fastfetch**: Fastfetch is a neofetch-like tool for fetching system information and displaying it prettily.
-It is written mainly in C, with performance and customizability in mind.
-This command installs fastfetch and configures from CTT's mybash repository.
-https://github.com/ChrisTitusTech/mybash
-- **Flatpak / Flathub**: Flatpak is a universal application sandbox for Linux that uses isolated packages from Flathub to prevent conflicts and system alterations, while alleviating dependency concerns.
-This command installs Flatpak and adds the Flathub repository
+- **Podman**: Podman is a daemon-less open platform that uses OS-level virtualization to deliver software in packages called containers.
+- **Podman-compose**: Podman Compose is a tool for defining and running multi-container applications using Podman.
+- **Fastfetch**: Fastfetch is a neofetch-like tool for fetching system information and displaying it prettily. It is written mainly in C, with performance and customizability in mind. This command installs fastfetch and configures from CTT's mybash repository. https://github.com/ChrisTitusTech/mybash
+- **Flatpak / Flathub**: Flatpak is a universal application sandbox for Linux that uses isolated packages from Flathub to prevent conflicts and system alterations, while alleviating dependency concerns. This command installs Flatpak and adds the Flathub repository
 - **Grub Theme**: Installs ChrisTitusTech's Top 5 Bootloader Themes script to allow for easy customization of GRUB.
-- **Kitty**: kitty is a free and open-source GPU-accelerated terminal emulator for Linux, macOS, and some BSD distributions, focused on performance and features.
-kitty is written in a mix of C and Python programming languages.
- This command installs and configures kitty.
+- **Kitty**: kitty is a free and open-source GPU-accelerated terminal emulator for Linux, macOS, and some BSD distributions, focused on performance and features. kitty is written in a mix of C and Python programming languages. This command installs and configures kitty.
 - **Linutil Installer**: Installs a distro-specific Linutil package locally.
 - **Linutil Updater**: Updates your local Linutil crate installation.
-- **Rofi**: Rofi is a window switcher, run dialog, ssh-launcher and dmenu replacement that started as a clone of simpleswitcher, written by Sean Pringle and later expanded by Dave Davenport.
-This command installs and configures rofi with configuration from CTT's DWM repo.
-https://github.com/ChrisTitusTech/dwm-titus
+- **Rofi**: Rofi is a window switcher, run dialog, ssh-launcher and dmenu replacement that started as a clone of simpleswitcher, written by Sean Pringle and later expanded by Dave Davenport. This command installs and configures rofi with configuration from CTT's DWM repo. https://github.com/ChrisTitusTech/dwm-titus
 - **Waydroid**: Waydroid is an emulator that allows you to run Android apps and games on Linux.
-- **ZSH Prompt**: The Z shell is a Unix shell that can be used as an interactive login shell and as a command interpreter for shell scripting. Zsh is an extended Bourne shell with many improvements, including some features of Bash, ksh, and tcsh.
-This command installs ZSH prompt and provides basic configuration.
+- **ZSH Prompt**: The Z shell is a Unix shell that can be used as an interactive login shell and as a command interpreter for shell scripting. Zsh is an extended Bourne shell with many improvements, including some features of Bash, ksh, and tcsh. This command installs ZSH prompt and provides basic configuration.
 
 ## Gaming
 
 
 ### Diablo II Resurrected
 
-- **Loot Filter**: This is a loot filter for Diablo II Resurrected.
-It's designed to be a simple, clean, and easy to read loot filter that highlights the most important items.
-Works on battle.net and single player.
-No frills, no config, just highlights high runes and other valuable items.
-For more information visit: https://github.com/ChrisTitusTech/d2r-loot-filter
+- **Loot Filter**: This is a loot filter for Diablo II Resurrected. It's designed to be a simple, clean, and easy to read loot filter that highlights the most important items. Works on battle.net and single player. No frills, no config, just highlights high runes and other valuable items. For more information visit: https://github.com/ChrisTitusTech/d2r-loot-filter
 
 ## Security
 
-- **Firewall Baselines (CTT)**: Developed to ease iptables firewall configuration, UFW provides a user friendly way to create an IPv4 or IPv6 host-based firewall.
-This command installs UFW and configures UFW based on CTT's recommended rules.
-For more information visit: https://christitus.com/linux-security-mistakes
+- **Firewall Baselines (CTT)**: Developed to ease iptables firewall configuration, UFW provides a user friendly way to create an IPv4 or IPv6 host-based firewall. This command installs UFW and configures UFW based on CTT's recommended rules. For more information visit: https://christitus.com/linux-security-mistakes
 
 ## System Setup
 
@@ -102,20 +87,18 @@ For more information visit: https://christitus.com/linux-security-mistakes
 
 - **Arch Server Setup**: This command installs a minimal arch server setup under 5 minutes.
 - **Linux Neptune for SteamDeck**: Valve's fork of Linux Kernel for the SteamDeck
-- **Paru AUR Helper**: Paru is your standard pacman wrapping AUR helper with lots of features and minimal interaction.
-To know more about AUR helpers visit: https://wiki.archlinux.org/title/AUR_helpers
-- **Yay AUR Helper**: Yet Another Yogurt - An AUR Helper Written in Go.
-To know more about AUR helpers visit: https://wiki.archlinux.org/title/AUR_helpers
+- **Paru AUR Helper**: Paru is your standard pacman wrapping AUR helper with lots of features and minimal interaction. To know more about AUR helpers visit: https://wiki.archlinux.org/title/AUR_helpers
+- **Yay AUR Helper**: Yet Another Yogurt - An AUR Helper Written in Go. To know more about AUR helpers visit: https://wiki.archlinux.org/title/AUR_helpers
 
 ### Fedora
 
 - **Configure DNF**: Optimizes DNF for parallel downloads
 - **Multimedia Codecs**: This script is designed to install multimedia codecs, and to ensure RPM Fusion repositories are installed.
 - **Nvidia Proprietary Drivers**: This script is designed to download the proprietary NVIDIA drivers in Fedora.
-- **RPM Fusion**: RPM Fusion provides software that the Fedora Project or Red Hat doesn't want to ship.
-That software is provided as precompiled RPMs for all current Fedora versions and current Red Hat Enterprise Linux or clones versions; you can use the RPM Fusion repositories with tools like yum and PackageKit.
-For more information visit: https://rpmfusion.org/
+- **RPM Fusion**: RPM Fusion provides software that the Fedora Project or Red Hat doesn't want to ship. That software is provided as precompiled RPMs for all current Fedora versions and current Red Hat Enterprise Linux or clones versions; you can use the RPM Fusion repositories with tools like yum and PackageKit. For more information visit: https://rpmfusion.org/
+- **Upgrade to a New Fedora Release**: Upgrades system to the next Fedora release
 - **Virtualization**: Enables Virtualization through dnf
+- **Btrfs Assistant, Snapper Config, grub-btrfs**: Installs Btrfs Assistant, Snapper, dnf snapper plugin and takes the first root(/) and /home snapshots. Enables snapper-timeline and snapper-cleanup services. Installs Grub-Btrfs. Notice: To perform a system recovery via grub-btrfs, perform a restore operation with Btrfs Assistant GUI after booting into the snapshot. Notice: If you used the default Fedora disk partitioning during OS installation, the /boot configured as an separate EXT4 partition. Therefore, it cannot be included in root snapshots. Backup separately.
 - **Build Prerequisites**: This script is designed to handle the installation of various software dependencies across different Linux distributions
 - **Full System Cleanup**: This script is designed to remove unnecessary packages, clean old cache files, remove temporary files, and to empty the trash.
 - **Full System Update**: This command updates your system to the latest packages available for your distro
@@ -146,7 +129,7 @@ For more information visit: https://rpmfusion.org/
 
 - **Auto Mount Drive**: This utility is designed to help with automating the process of mounting a drive on to your system.
 - **Bluetooth Manager**: This utility is designed to manage bluetooth in your system
-- **Numlock on Startup**: This utility is designed to configure auto enabling of numlock on boot
+- **Numlock on Startup**: This utility is designed to enable Num Lock at boot, rather than within desktop environments like KDE or GNOME
 - **Ollama**: This utility is designed to manage ollama in your system
 - **Service Manager**: This utility is designed to manage services in your system
 - **WiFi Manager**: This utility is designed to manage wifi in your system

man/linutil.1

@@ -36,6 +36,10 @@ Defaults to \fIdefault\fR.
 \fB\-\-override\-validation\fR
 Show all available entries, disregarding compatibility checks. (\fBUNSAFE\fR)
 
+.TP
+\fB\-\-size\-bypass\fR
+Bypass the terminal size limit
+
 .TP
 \fB\-h\fR, \fB\-\-help\fR
 Print help.

tui/Cargo.toml

@@ -7,34 +7,31 @@ edition = "2021"
 license.workspace = true
 repository = "https://github.com/ChrisTitusTech/linutil/tree/main/tui"
 version.workspace = true
-include = ["src/*.rs", "Cargo.toml", "build.rs", "cool_tips.txt", "../man/linutil.1"]
-build = "build.rs"
+include = ["src/*.rs", "Cargo.toml", "cool_tips.txt", "../man/linutil.1"]
 
 [features]
 default = ["tips"]
 tips = ["rand"]
 
 [dependencies]
-clap = { version = "4.5.19", features = ["derive"] }
+clap = { version = "4.5.20", features = ["derive"] }
 crossterm = "0.28.1"
 ego-tree = { workspace = true }
 oneshot = "0.1.8"
 portable-pty = "0.8.1"
-ratatui = "0.28.1"
-tui-term = "0.1.12"
+ratatui = "0.29.0"
+tui-term = "0.2.0"
 temp-dir = "0.1.14"
 unicode-width = "0.2.0"
 rand = { version = "0.8.5", optional = true }
 linutil_core = { path = "../core", version = "24.9.28" }
-tree-sitter-highlight = "0.24.2"
+tree-sitter-highlight = "0.24.3"
 tree-sitter-bash = "0.23.1"
+textwrap = "0.16.1"
 anstyle = "1.0.8"
-ansi-to-tui = "6.0.0"
+ansi-to-tui = "7.0.0"
 zips = "0.1.7"
 
-[build-dependencies]
-chrono = "0.4.33"
-
 [[bin]]
 name = "linutil"
 path = "src/main.rs"

tui/build.rs

@@ -1,7 +0,0 @@
-fn main() {
-    // Add current date as a variable to be displayed in the 'Linux Toolbox' text.
-    println!(
-        "cargo:rustc-env=BUILD_DATE={}",
-        chrono::Local::now().format("%Y-%m-%d")
-    );
-}

tui/src/confirmation.rs

@@ -60,6 +60,7 @@ impl FloatContent for ConfirmPrompt {
     fn draw(&mut self, frame: &mut Frame, area: Rect) {
         let block = Block::default()
             .borders(Borders::ALL)
+            .border_set(ratatui::symbols::border::ROUNDED)
             .title(" Confirm selections ")
             .title_bottom(" [y] to continue, [n] to abort ")
             .title_alignment(Alignment::Center)
@@ -88,7 +89,7 @@ impl FloatContent for ConfirmPrompt {
         use KeyCode::*;
         self.status = match key.code {
             Char('y') | Char('Y') => ConfirmStatus::Confirm,
-            Char('n') | Char('N') | Esc => ConfirmStatus::Abort,
+            Char('n') | Char('N') | Esc | Char('q') => ConfirmStatus::Abort,
             Char('j') => {
                 self.scroll_down();
                 ConfirmStatus::None
@@ -116,10 +117,10 @@ impl FloatContent for ConfirmPrompt {
             "Confirmation prompt",
             Box::new([
                 Shortcut::new("Continue", ["Y", "y"]),
-                Shortcut::new("Abort", ["N", "n"]),
-                Shortcut::new("Scroll up", ["j"]),
-                Shortcut::new("Scroll down", ["k"]),
-                Shortcut::new("Close linutil", ["CTRL-c", "q"]),
+                Shortcut::new("Abort", ["N", "n", "q", "Esc"]),
+                Shortcut::new("Scroll up", ["k"]),
+                Shortcut::new("Scroll down", ["j"]),
+                Shortcut::new("Close linutil", ["CTRL-c"]),
             ]),
         )
     }

tui/src/filter.rs

@@ -4,7 +4,7 @@ use ego_tree::NodeId;
 use linutil_core::Tab;
 use ratatui::{
     layout::{Position, Rect},
-    style::Style,
+    style::{Color, Style},
     text::Span,
     widgets::{Block, Borders, Paragraph},
     Frame,
@@ -22,6 +22,7 @@ pub struct Filter {
     in_search_mode: bool,
     input_position: usize,
     items: Vec<ListEntry>,
+    completion_preview: Option<String>,
 }
 
 impl Filter {
@@ -31,17 +32,23 @@ impl Filter {
             in_search_mode: false,
             input_position: 0,
             items: vec![],
+            completion_preview: None,
         }
     }
+
     pub fn item_list(&self) -> &[ListEntry] {
         &self.items
     }
+
     pub fn activate_search(&mut self) {
         self.in_search_mode = true;
     }
+
     pub fn deactivate_search(&mut self) {
         self.in_search_mode = false;
+        self.completion_preview = None;
     }
+
     pub fn update_items(&mut self, tabs: &[Tab], current_tab: usize, node: NodeId) {
         if self.search_input.is_empty() {
             let curr = tabs[current_tab].tree.get(node).unwrap();
@@ -78,13 +85,34 @@ impl Filter {
             }
             self.items.sort_by(|a, b| a.node.name.cmp(&b.node.name));
         }
+
+        self.update_completion_preview();
     }
+
+    fn update_completion_preview(&mut self) {
+        if self.search_input.is_empty() {
+            self.completion_preview = None;
+            return;
+        }
+
+        let input = self.search_input.iter().collect::<String>().to_lowercase();
+        self.completion_preview = self.items.iter().find_map(|item| {
+            let item_name_lower = item.node.name.to_lowercase();
+            if item_name_lower.starts_with(&input) {
+                Some(item_name_lower[input.len()..].to_string())
+            } else {
+                None
+            }
+        });
+    }
+
     pub fn draw_searchbar(&self, frame: &mut Frame, area: Rect, theme: &Theme) {
         //Set the search bar text (If empty use the placeholder)
         let display_text = if !self.in_search_mode && self.search_input.is_empty() {
             Span::raw("Press / to search")
         } else {
-            Span::raw(self.search_input.iter().collect::<String>())
+            let input_text = self.search_input.iter().collect::<String>();
+            Span::styled(input_text, Style::default().fg(theme.focused_color()))
         };
 
         let search_color = if self.in_search_mode {
@@ -95,7 +123,12 @@ impl Filter {
 
         //Create the search bar widget
         let search_bar = Paragraph::new(display_text)
-            .block(Block::default().borders(Borders::ALL).title("Search"))
+            .block(
+                Block::default()
+                    .borders(Borders::ALL)
+                    .border_set(ratatui::symbols::border::ROUNDED)
+                    .title(" Search "),
+            )
             .style(Style::default().fg(search_color));
 
         //Render the search bar (First chunk of the screen)
@@ -110,11 +143,22 @@ impl Filter {
             let x = area.x + cursor_position as u16 + 1;
             let y = area.y + 1;
             frame.set_cursor_position(Position::new(x, y));
+
+            if let Some(preview) = &self.completion_preview {
+                let preview_span = Span::styled(preview, Style::default().fg(Color::DarkGray));
+                let preview_paragraph = Paragraph::new(preview_span).style(Style::default());
+                let preview_area = Rect::new(
+                    x,
+                    y,
+                    (preview.len() as u16).min(area.width - cursor_position as u16 - 1),
+                    1,
+                );
+                frame.render_widget(preview_paragraph, preview_area);
+            }
         }
     }
     // Handles key events. Returns true if search must be exited
     pub fn handle_key(&mut self, event: &KeyEvent) -> SearchAction {
-        //Insert user input into the search bar
         match event.code {
             KeyCode::Char('c') if event.modifiers.contains(KeyModifiers::CONTROL) => {
                 return self.exit_search()
@@ -124,10 +168,17 @@ impl Filter {
             KeyCode::Delete => self.remove_next(),
             KeyCode::Left => return self.cursor_left(),
             KeyCode::Right => return self.cursor_right(),
+            KeyCode::Tab => return self.complete_search(),
+            KeyCode::Esc => {
+                self.input_position = 0;
+                self.search_input.clear();
+                self.completion_preview = None;
+                return SearchAction::Exit;
+            }
             KeyCode::Enter => return SearchAction::Exit,
-            KeyCode::Esc => return self.exit_search(),
             _ => return SearchAction::None,
         };
+        self.update_completion_preview();
         SearchAction::Update
     }
 
@@ -141,16 +192,19 @@ impl Filter {
         self.input_position = self.input_position.saturating_sub(1);
         SearchAction::None
     }
+
     fn cursor_right(&mut self) -> SearchAction {
         if self.input_position < self.search_input.len() {
             self.input_position += 1;
         }
         SearchAction::None
     }
+
     fn insert_char(&mut self, input: char) {
         self.search_input.insert(self.input_position, input);
         self.cursor_right();
     }
+
     fn remove_previous(&mut self) {
         let current = self.input_position;
         if current > 0 {
@@ -158,10 +212,27 @@ impl Filter {
             self.cursor_left();
         }
     }
+
     fn remove_next(&mut self) {
         let current = self.input_position;
         if current < self.search_input.len() {
             self.search_input.remove(current);
         }
     }
+
+    fn complete_search(&mut self) -> SearchAction {
+        if let Some(completion) = self.completion_preview.take() {
+            self.search_input.extend(completion.chars());
+            self.input_position = self.search_input.len();
+            self.update_completion_preview();
+            SearchAction::Update
+        } else {
+            SearchAction::None
+        }
+    }
+
+    pub fn clear_search(&mut self) {
+        self.search_input.clear();
+        self.input_position = 0;
+    }
 }

tui/src/floating_text.rs

@@ -20,16 +20,20 @@ use ratatui::{
 
 use ansi_to_tui::IntoText;
 
+use textwrap::wrap;
 use tree_sitter_bash as hl_bash;
 use tree_sitter_highlight::{self as hl, HighlightEvent};
 use zips::zip_result;
 
 pub struct FloatingText {
-    pub src: Vec<String>,
+    pub src: String,
+    wrapped_lines: Vec<String>,
     max_line_width: usize,
     v_scroll: usize,
     h_scroll: usize,
     mode_title: String,
+    wrap_words: bool,
+    frame_height: usize,
 }
 
 macro_rules! style {
@@ -107,12 +111,6 @@ fn get_highlighted_string(s: &str) -> Option<String> {
     Some(output)
 }
 
-macro_rules! max_width {
-    ($($lines:tt)+) => {{
-        $($lines)+.iter().fold(0, |accum, val| accum.max(val.len()))
-    }}
-}
-
 #[inline]
 fn get_lines(s: &str) -> Vec<&str> {
     s.lines().collect::<Vec<_>>()
@@ -124,54 +122,56 @@ fn get_lines_owned(s: &str) -> Vec<String> {
 }
 
 impl FloatingText {
-    pub fn new(text: String, title: &str) -> Self {
-        let src = get_lines(&text)
-            .into_iter()
-            .map(|s| s.to_string())
-            .collect::<Vec<_>>();
+    pub fn new(text: String, title: &str, wrap_words: bool) -> Self {
+        let max_line_width = 80;
+        let wrapped_lines = if wrap_words {
+            wrap(&text, max_line_width)
+                .into_iter()
+                .map(|cow| cow.into_owned())
+                .collect()
+        } else {
+            get_lines_owned(&text)
+        };
 
-        let max_line_width = max_width!(src);
         Self {
-            src,
+            src: text,
+            wrapped_lines,
             mode_title: title.to_string(),
             max_line_width,
             v_scroll: 0,
             h_scroll: 0,
+            wrap_words,
+            frame_height: 0,
         }
     }
 
     pub fn from_command(command: &Command, title: String) -> Option<Self> {
-        let (max_line_width, src) = match command {
-            Command::Raw(cmd) => {
-                // just apply highlights directly
-                (max_width!(get_lines(cmd)), Some(cmd.clone()))
-            }
-            Command::LocalFile { file, .. } => {
-                // have to read from tmp dir to get cmd src
-                let raw = std::fs::read_to_string(file)
-                    .map_err(|_| format!("File not found: {:?}", file))
-                    .unwrap();
+        let src = match command {
+            Command::Raw(cmd) => Some(cmd.clone()),
+            Command::LocalFile { file, .. } => std::fs::read_to_string(file)
+                .map_err(|_| format!("File not found: {:?}", file))
+                .ok(),
+            Command::None => None,
+        }?;
 
-                (max_width!(get_lines(&raw)), Some(raw))
-            }
-
-            // If command is a folder, we don't display a preview
-            Command::None => (0usize, None),
-        };
-
-        let src = get_lines_owned(&get_highlighted_string(&src?)?);
+        let max_line_width = 80;
+        let wrapped_lines = get_lines_owned(&get_highlighted_string(&src)?);
 
         Some(Self {
             src,
+            wrapped_lines,
             mode_title: title,
             max_line_width,
             h_scroll: 0,
             v_scroll: 0,
+            wrap_words: false,
+            frame_height: 0,
         })
     }
 
     fn scroll_down(&mut self) {
-        if self.v_scroll + 1 < self.src.len() {
+        let visible_lines = self.frame_height.saturating_sub(2);
+        if self.v_scroll + visible_lines < self.src.len() {
             self.v_scroll += 1;
         }
     }
@@ -193,30 +193,57 @@ impl FloatingText {
             self.h_scroll += 1;
         }
     }
+
+    fn update_wrapping(&mut self, width: usize) {
+        if self.max_line_width != width {
+            self.max_line_width = width;
+            self.wrapped_lines = if self.wrap_words {
+                wrap(&self.src, width)
+                    .into_iter()
+                    .map(|cow| cow.into_owned())
+                    .collect()
+            } else {
+                get_lines_owned(&get_highlighted_string(&self.src).unwrap_or(self.src.clone()))
+            };
+        }
+    }
 }
 
 impl FloatContent for FloatingText {
     fn draw(&mut self, frame: &mut Frame, area: Rect) {
+        self.frame_height = area.height as usize;
+
         // Define the Block with a border and background color
         let block = Block::default()
             .borders(Borders::ALL)
+            .border_set(ratatui::symbols::border::ROUNDED)
             .title(self.mode_title.clone())
             .title_alignment(ratatui::layout::Alignment::Center)
             .title_style(Style::default().reversed())
             .style(Style::default());
 
-        // Draw the Block first
+        frame.render_widget(Clear, area);
+
         frame.render_widget(block.clone(), area);
 
         // Calculate the inner area to ensure text is not drawn over the border
         let inner_area = block.inner(area);
-        let Rect { height, .. } = inner_area;
+        let Rect { width, height, .. } = inner_area;
+
+        self.update_wrapping(width as usize);
+
         let lines = self
-            .src
+            .wrapped_lines
             .iter()
             .skip(self.v_scroll)
             .take(height as usize)
-            .flat_map(|l| l.into_text().unwrap())
+            .flat_map(|l| {
+                if self.wrap_words {
+                    vec![Line::raw(l.clone())]
+                } else {
+                    l.into_text().unwrap().lines
+                }
+            })
             .map(|line| {
                 let mut skipped = 0;
                 let mut spans = line
@@ -253,9 +280,6 @@ impl FloatContent for FloatingText {
             .block(Block::default())
             .highlight_style(Style::default().reversed());
 
-        // Clear the text underneath the floats rendered area
-        frame.render_widget(Clear, inner_area);
-
         // Render the list inside the bordered area
         frame.render_widget(list, inner_area);
     }

tui/src/hint.rs

@@ -27,41 +27,33 @@ pub fn create_shortcut_list(
     shortcuts: impl IntoIterator<Item = Shortcut>,
     render_width: u16,
 ) -> Box<[Line<'static>]> {
-    let hints = shortcuts.into_iter().collect::<Box<[Shortcut]>>();
+    let shortcut_spans: Vec<Vec<Span<'static>>> =
+        shortcuts.into_iter().map(|h| h.to_spans()).collect();
 
-    let mut shortcut_spans: Vec<Vec<Span<'static>>> = hints.iter().map(|h| h.to_spans()).collect();
+    let max_shortcut_width = shortcut_spans
+        .iter()
+        .map(|s| span_vec_len(s))
+        .max()
+        .unwrap_or(0);
 
-    let mut lines: Vec<Line<'static>> = vec![];
+    let columns = (render_width as usize / (max_shortcut_width + 4)).max(1);
+    let rows = (shortcut_spans.len() + columns - 1) / columns;
 
-    loop {
-        let split_idx = shortcut_spans
-            .iter()
-            .scan(0usize, |total_len, s| {
-                // take at least one so that we guarantee that we drain the list
-                // otherwise, this might lock up if there's a shortcut that exceeds the window width
-                if *total_len == 0 {
-                    *total_len += span_vec_len(s) + 4;
-                    Some(())
-                } else {
-                    *total_len += span_vec_len(s);
-                    if *total_len > render_width as usize {
-                        None
-                    } else {
-                        *total_len += 4;
-                        Some(())
-                    }
-                }
+    let mut lines: Vec<Line<'static>> = Vec::new();
+
+    for row in 0..rows {
+        let row_spans: Vec<_> = (0..columns)
+            .filter_map(|col| {
+                let index = row * columns + col;
+                shortcut_spans.get(index).map(|span| {
+                    let padding = max_shortcut_width - span_vec_len(span);
+                    let mut span_clone = span.clone();
+                    span_clone.push(Span::raw(" ".repeat(padding)));
+                    span_clone
+                })
             })
-            .count();
-
-        let rest = shortcut_spans.split_off(split_idx);
-        lines.push(add_spacing(shortcut_spans));
-
-        if rest.is_empty() {
-            break;
-        } else {
-            shortcut_spans = rest;
-        }
+            .collect();
+        lines.push(add_spacing(row_spans));
     }
 
     lines.into_boxed_slice()

tui/src/main.rs

@@ -33,12 +33,15 @@ struct Args {
     #[arg(long, default_value_t = false)]
     #[clap(help = "Show all available options, disregarding compatibility checks (UNSAFE)")]
     override_validation: bool,
+    #[arg(long, default_value_t = false)]
+    #[clap(help = "Bypass the terminal size limit")]
+    size_bypass: bool,
 }
 
 fn main() -> io::Result<()> {
     let args = Args::parse();
 
-    let mut state = AppState::new(args.theme, args.override_validation);
+    let mut state = AppState::new(args.theme, args.override_validation, args.size_bypass);
 
     stdout().execute(EnterAlternateScreen)?;
     enable_raw_mode()?;

tui/src/running_command.rs

@@ -53,6 +53,7 @@ impl FloatContent for RunningCommand {
             // Display a block indicating the command is running
             Block::default()
                 .borders(Borders::ALL)
+                .border_set(ratatui::symbols::border::ROUNDED)
                 .title_top(Line::from("Running the command....").centered())
                 .title_style(Style::default().reversed())
                 .title_bottom(Line::from("Press Ctrl-C to KILL the command"))
@@ -74,12 +75,13 @@ impl FloatContent for RunningCommand {
 
             title_line.push_span(
                 Span::default()
-                    .content(" press <ENTER> to close this window ")
+                    .content(" Press <ENTER> to close this window ")
                     .style(Style::default()),
             );
 
             Block::default()
                 .borders(Borders::ALL)
+                .border_set(ratatui::symbols::border::ROUNDED)
                 .title_top(title_line.centered())
         };
 

tui/src/state.rs

@@ -9,7 +9,7 @@ use crate::{
 };
 use crossterm::event::{KeyCode, KeyEvent, KeyEventKind, KeyModifiers};
 use ego_tree::NodeId;
-use linutil_core::{ListNode, Tab};
+use linutil_core::{ListNode, TabList};
 #[cfg(feature = "tips")]
 use rand::Rng;
 use ratatui::{
@@ -20,11 +20,10 @@ use ratatui::{
     Frame,
 };
 use std::rc::Rc;
-use temp_dir::TempDir;
 
-const MIN_WIDTH: u16 = 77;
-const MIN_HEIGHT: u16 = 19;
-const TITLE: &str = concat!("Linux Toolbox - ", env!("BUILD_DATE"));
+const MIN_WIDTH: u16 = 100;
+const MIN_HEIGHT: u16 = 25;
+const TITLE: &str = concat!(" Linux Toolbox - ", env!("CARGO_PKG_VERSION"), " ");
 const ACTIONS_GUIDE: &str = "List of important tasks performed by commands' names:
 
 D  - disk modifications (ex. partitioning) (privileged)
@@ -41,19 +40,17 @@ P* - privileged *
 ";
 
 pub struct AppState {
-    /// This must be passed to retain the temp dir until the end of the program
-    _temp_dir: TempDir,
     /// Selected theme
     theme: Theme,
     /// Currently focused area
     pub focus: Focus,
     /// List of tabs
-    tabs: Vec<Tab>,
+    tabs: TabList,
     /// Current tab
     current_tab: ListState,
     /// This stack keeps track of our "current directory". You can think of it as `pwd`. but not
     /// just the current directory, all paths that took us here, so we can "cd .."
-    visit_stack: Vec<NodeId>,
+    visit_stack: Vec<(NodeId, usize)>,
     /// This is the state associated with the list widget, used to display the selection in the
     /// widget
     selection: ListState,
@@ -62,7 +59,8 @@ pub struct AppState {
     selected_commands: Vec<Rc<ListNode>>,
     drawable: bool,
     #[cfg(feature = "tips")]
-    tip: &'static str,
+    tip: String,
+    size_bypass: bool,
 }
 
 pub enum Focus {
@@ -79,18 +77,24 @@ pub struct ListEntry {
     pub has_children: bool,
 }
 
+enum SelectedItem {
+    UpDir,
+    Directory,
+    Command,
+    None,
+}
+
 impl AppState {
-    pub fn new(theme: Theme, override_validation: bool) -> Self {
-        let (temp_dir, tabs) = linutil_core::get_tabs(!override_validation);
+    pub fn new(theme: Theme, override_validation: bool, size_bypass: bool) -> Self {
+        let tabs = linutil_core::get_tabs(!override_validation);
         let root_id = tabs[0].tree.root().id();
 
         let mut state = Self {
-            _temp_dir: temp_dir,
             theme,
             focus: Focus::List,
             tabs,
             current_tab: ListState::default().with_selected(Some(0)),
-            visit_stack: vec![root_id],
+            visit_stack: vec![(root_id, 0usize)],
             selection: ListState::default().with_selected(Some(0)),
             filter: Filter::new(),
             multi_select: false,
@@ -98,6 +102,7 @@ impl AppState {
             drawable: false,
             #[cfg(feature = "tips")]
             tip: get_random_tip(),
+            size_bypass,
         };
 
         state.update_items();
@@ -147,12 +152,10 @@ impl AppState {
                 hints.push(Shortcut::new("Select item below", ["j", "Down"]));
                 hints.push(Shortcut::new("Next theme", ["t"]));
                 hints.push(Shortcut::new("Previous theme", ["T"]));
-
-                if self.is_current_tab_multi_selectable() {
-                    hints.push(Shortcut::new("Toggle multi-selection mode", ["v"]));
+                hints.push(Shortcut::new("Multi-selection mode", ["v"]));
+                if self.multi_select {
                     hints.push(Shortcut::new("Select multiple commands", ["Space"]));
                 }
-
                 hints.push(Shortcut::new("Next tab", ["Tab"]));
                 hints.push(Shortcut::new("Previous tab", ["Shift-Tab"]));
                 hints.push(Shortcut::new("Important actions guide", ["g"]));
@@ -182,7 +185,9 @@ impl AppState {
     pub fn draw(&mut self, frame: &mut Frame) {
         let terminal_size = frame.area();
 
-        if terminal_size.width < MIN_WIDTH || terminal_size.height < MIN_HEIGHT {
+        if !self.size_bypass
+            && (terminal_size.height < MIN_HEIGHT || terminal_size.width < MIN_WIDTH)
+        {
             let warning = Paragraph::new(format!(
                 "Terminal size too small:\nWidth = {} Height = {}\n\nMinimum size:\nWidth = {}  Height = {}",
                 terminal_size.width,
@@ -209,19 +214,19 @@ impl AppState {
             self.drawable = true;
         }
 
-        let label_block =
-            Block::default()
-                .borders(Borders::all())
-                .border_set(ratatui::symbols::border::Set {
-                    top_left: " ",
-                    top_right: " ",
-                    bottom_left: " ",
-                    bottom_right: " ",
-                    vertical_left: " ",
-                    vertical_right: " ",
-                    horizontal_top: "*",
-                    horizontal_bottom: "*",
-                });
+        let label_block = Block::default()
+            .borders(Borders::ALL)
+            .border_set(ratatui::symbols::border::ROUNDED)
+            .border_set(ratatui::symbols::border::Set {
+                top_left: " ",
+                top_right: " ",
+                bottom_left: " ",
+                bottom_right: " ",
+                vertical_left: " ",
+                vertical_right: " ",
+                horizontal_top: "*",
+                horizontal_bottom: "*",
+            });
         let str1 = "Linutil ";
         let str2 = "by Chris Titus";
         let label = Paragraph::new(Line::from(vec![
@@ -245,7 +250,8 @@ impl AppState {
 
         let keybinds_block = Block::default()
             .title(format!(" {} ", keybind_scope))
-            .borders(Borders::all());
+            .borders(Borders::ALL)
+            .border_set(ratatui::symbols::border::ROUNDED);
 
         let keybinds = create_shortcut_list(shortcuts, keybind_render_width);
         let n_lines = keybinds.len() as u16;
@@ -289,7 +295,11 @@ impl AppState {
         };
 
         let list = List::new(tabs)
-            .block(Block::default().borders(Borders::ALL))
+            .block(
+                Block::default()
+                    .borders(Borders::ALL)
+                    .border_set(ratatui::symbols::border::ROUNDED),
+            )
             .highlight_style(tab_hl_style)
             .highlight_symbol(self.theme.tab_icon());
         frame.render_stateful_widget(list, left_chunks[1], &mut self.current_tab);
@@ -324,7 +334,12 @@ impl AppState {
                 let (indicator, style) = if is_selected {
                     (self.theme.multi_select_icon(), Style::default().bold())
                 } else {
-                    ("", Style::new())
+                    let ms_style = if self.multi_select && !node.multi_select {
+                        Style::default().fg(self.theme.multi_select_disabled_color())
+                    } else {
+                        Style::new()
+                    };
+                    ("", ms_style)
                 };
                 if *has_children {
                     Line::from(format!(
@@ -334,6 +349,7 @@ impl AppState {
                         indicator
                     ))
                     .style(self.theme.dir_color())
+                    .patch_style(style)
                 } else {
                     Line::from(format!(
                         "{}  {} {}",
@@ -351,13 +367,21 @@ impl AppState {
             |ListEntry {
                  node, has_children, ..
              }| {
+                let ms_style = if self.multi_select && !node.multi_select {
+                    Style::default().fg(self.theme.multi_select_disabled_color())
+                } else {
+                    Style::new()
+                };
                 if *has_children {
-                    Line::from(" ").style(self.theme.dir_color())
+                    Line::from(" ")
+                        .style(self.theme.dir_color())
+                        .patch_style(ms_style)
                 } else {
                     Line::from(format!("{} ", node.task_list))
                         .alignment(Alignment::Right)
                         .style(self.theme.cmd_color())
                         .bold()
+                        .patch_style(ms_style)
                 }
             },
         ));
@@ -369,17 +393,17 @@ impl AppState {
         };
 
         let title = if self.multi_select {
-            &format!("{} [Multi-Select]", TITLE)
+            &format!("{}[Multi-Select] ", TITLE)
         } else {
             TITLE
         };
 
         #[cfg(feature = "tips")]
-        let bottom_title = Line::from(self.tip.bold().blue()).right_aligned();
+        let bottom_title = Line::from(self.tip.as_str().bold().blue()).right_aligned();
         #[cfg(not(feature = "tips"))]
         let bottom_title = "";
 
-        let task_list_title = Line::from("Important Actions ").right_aligned();
+        let task_list_title = Line::from(" Important Actions ").right_aligned();
 
         // Create the list widget with items
         let list = List::new(items)
@@ -387,6 +411,7 @@ impl AppState {
             .block(
                 Block::default()
                     .borders(Borders::ALL & !Borders::RIGHT)
+                    .border_set(ratatui::symbols::border::ROUNDED)
                     .title(title)
                     .title_bottom(bottom_title),
             )
@@ -396,6 +421,7 @@ impl AppState {
         let disclaimer_list = List::new(task_items).highlight_style(style).block(
             Block::default()
                 .borders(Borders::ALL & !Borders::LEFT)
+                .border_set(ratatui::symbols::border::ROUNDED)
                 .title(task_list_title),
         );
 
@@ -414,11 +440,15 @@ impl AppState {
         // This should be defined first to allow closing
         // the application even when not drawable ( If terminal is small )
         // Exit on 'q' or 'Ctrl-c' input
-        if matches!(
-            self.focus,
-            Focus::TabList | Focus::List | Focus::ConfirmationPrompt(_)
-        ) && (key.code == KeyCode::Char('q')
-            || key.modifiers.contains(KeyModifiers::CONTROL) && key.code == KeyCode::Char('c'))
+        if matches!(self.focus, Focus::TabList | Focus::List)
+            && (key.code == KeyCode::Char('q')
+                || key.modifiers.contains(KeyModifiers::CONTROL) && key.code == KeyCode::Char('c'))
+        {
+            return false;
+        }
+
+        if matches!(self.focus, Focus::ConfirmationPrompt(_))
+            && (key.modifiers.contains(KeyModifiers::CONTROL) && key.code == KeyCode::Char('c'))
         {
             return false;
         }
@@ -469,6 +499,13 @@ impl AppState {
                         // enabled, need to clear it to prevent state corruption
                         if !self.multi_select {
                             self.selected_commands.clear()
+                        } else {
+                            // Prevents non multi_selectable cmd from being pushed into the selected list
+                            if let Some(node) = self.get_selected_node() {
+                                if !node.multi_select {
+                                    self.selected_commands.retain(|cmd| cmd.name != node.name);
+                                }
+                            }
                         }
                     }
                     ConfirmStatus::Confirm => self.handle_confirm_command(),
@@ -485,17 +522,9 @@ impl AppState {
             Focus::TabList => match key.code {
                 KeyCode::Enter | KeyCode::Char('l') | KeyCode::Right => self.focus = Focus::List,
 
-                KeyCode::Char('j') | KeyCode::Down
-                    if self.current_tab.selected().unwrap() + 1 < self.tabs.len() =>
-                {
-                    self.current_tab.select_next();
-                    self.refresh_tab();
-                }
+                KeyCode::Char('j') | KeyCode::Down => self.scroll_tab_down(),
 
-                KeyCode::Char('k') | KeyCode::Up => {
-                    self.current_tab.select_previous();
-                    self.refresh_tab();
-                }
+                KeyCode::Char('k') | KeyCode::Up => self.scroll_tab_up(),
 
                 KeyCode::Char('/') => self.enter_search(),
                 KeyCode::Char('t') => self.theme.next(),
@@ -505,8 +534,8 @@ impl AppState {
             },
 
             Focus::List if key.kind != KeyEventKind::Release => match key.code {
-                KeyCode::Char('j') | KeyCode::Down => self.selection.select_next(),
-                KeyCode::Char('k') | KeyCode::Up => self.selection.select_previous(),
+                KeyCode::Char('j') | KeyCode::Down => self.scroll_down(),
+                KeyCode::Char('k') | KeyCode::Up => self.scroll_up(),
                 KeyCode::Char('p') | KeyCode::Char('P') => self.enable_preview(),
                 KeyCode::Char('d') | KeyCode::Char('D') => self.enable_description(),
                 KeyCode::Enter | KeyCode::Char('l') | KeyCode::Right => self.handle_enter(),
@@ -525,41 +554,66 @@ impl AppState {
         true
     }
 
+    fn scroll_down(&mut self) {
+        let len = self.filter.item_list().len();
+        if len == 0 {
+            return;
+        }
+        let current = self.selection.selected().unwrap_or(0);
+        let max_index = if self.at_root() { len - 1 } else { len };
+        let next = if current + 1 > max_index {
+            0
+        } else {
+            current + 1
+        };
+
+        self.selection.select(Some(next));
+    }
+
+    fn scroll_up(&mut self) {
+        let len = self.filter.item_list().len();
+        if len == 0 {
+            return;
+        }
+        let current = self.selection.selected().unwrap_or(0);
+        let max_index = if self.at_root() { len - 1 } else { len };
+        let next = if current == 0 { max_index } else { current - 1 };
+
+        self.selection.select(Some(next));
+    }
+
     fn toggle_multi_select(&mut self) {
-        if self.is_current_tab_multi_selectable() {
-            self.multi_select = !self.multi_select;
-            if !self.multi_select {
-                self.selected_commands.clear();
-            }
+        self.multi_select = !self.multi_select;
+        if !self.multi_select {
+            self.selected_commands.clear();
         }
     }
 
     fn toggle_selection(&mut self) {
-        if let Some(command) = self.get_selected_node() {
-            if self.selected_commands.contains(&command) {
-                self.selected_commands.retain(|c| c != &command);
-            } else {
-                self.selected_commands.push(command);
+        if let Some(node) = self.get_selected_node() {
+            if node.multi_select {
+                if self.selected_commands.contains(&node) {
+                    self.selected_commands.retain(|c| c != &node);
+                } else {
+                    self.selected_commands.push(node);
+                }
             }
         }
     }
 
-    pub fn is_current_tab_multi_selectable(&self) -> bool {
-        let index = self.current_tab.selected().unwrap_or(0);
-        self.tabs
-            .get(index)
-            .map_or(false, |tab| tab.multi_selectable)
-    }
-
     fn update_items(&mut self) {
         self.filter.update_items(
             &self.tabs,
             self.current_tab.selected().unwrap(),
-            *self.visit_stack.last().unwrap(),
+            self.visit_stack.last().unwrap().0,
         );
-        if !self.is_current_tab_multi_selectable() {
-            self.multi_select = false;
-            self.selected_commands.clear();
+
+        let len = self.filter.item_list().len();
+        if len > 0 {
+            let current = self.selection.selected().unwrap_or(0);
+            self.selection.select(Some(current.min(len - 1)));
+        } else {
+            self.selection.select(None);
         }
     }
 
@@ -579,9 +633,10 @@ impl AppState {
     }
 
     fn enter_parent_directory(&mut self) {
-        self.visit_stack.pop();
-        self.selection.select(Some(0));
-        self.update_items();
+        if let Some((_, previous_position)) = self.visit_stack.pop() {
+            self.selection.select(Some(previous_position));
+            self.update_items();
+        }
     }
 
     fn get_selected_node(&self) -> Option<Rc<ListNode>> {
@@ -608,20 +663,22 @@ impl AppState {
     }
 
     pub fn go_to_selected_dir(&mut self) {
-        let mut selected_index = self.selection.selected().unwrap_or(0);
+        let selected_index = self.selection.selected().unwrap_or(0);
 
         if !self.at_root() && selected_index == 0 {
             self.enter_parent_directory();
             return;
         }
 
-        if !self.at_root() {
-            selected_index = selected_index.saturating_sub(1);
-        }
+        let actual_index = if self.at_root() {
+            selected_index
+        } else {
+            selected_index - 1
+        };
 
-        if let Some(item) = self.filter.item_list().get(selected_index) {
+        if let Some(item) = self.filter.item_list().get(actual_index) {
             if item.has_children {
-                self.visit_stack.push(item.id);
+                self.visit_stack.push((item.id, selected_index));
                 self.selection.select(Some(0));
                 self.update_items();
             }
@@ -653,7 +710,6 @@ impl AppState {
 
     pub fn selected_item_is_up_dir(&self) -> bool {
         let selected_index = self.selection.selected().unwrap_or(0);
-
         !self.at_root() && selected_index == 0
     }
 
@@ -669,29 +725,47 @@ impl AppState {
 
     fn enable_description(&mut self) {
         if let Some(command_description) = self.get_selected_description() {
-            let description = FloatingText::new(command_description, "Command Description");
-            self.spawn_float(description, 80, 80);
+            if !command_description.is_empty() {
+                let description =
+                    FloatingText::new(command_description, "Command Description", true);
+                self.spawn_float(description, 80, 80);
+            }
+        }
+    }
+
+    fn get_selected_item_type(&self) -> SelectedItem {
+        if self.selected_item_is_up_dir() {
+            SelectedItem::UpDir
+        } else if self.selected_item_is_dir() {
+            SelectedItem::Directory
+        } else if self.selected_item_is_cmd() {
+            SelectedItem::Command
+        } else {
+            SelectedItem::None
         }
     }
 
     fn handle_enter(&mut self) {
-        if self.selected_item_is_cmd() {
-            if self.selected_commands.is_empty() {
-                if let Some(node) = self.get_selected_node() {
-                    self.selected_commands.push(node);
+        match self.get_selected_item_type() {
+            SelectedItem::UpDir => self.enter_parent_directory(),
+            SelectedItem::Directory => self.go_to_selected_dir(),
+            SelectedItem::Command => {
+                if self.selected_commands.is_empty() {
+                    if let Some(node) = self.get_selected_node() {
+                        self.selected_commands.push(node);
+                    }
                 }
+
+                let cmd_names = self
+                    .selected_commands
+                    .iter()
+                    .map(|node| node.name.as_str())
+                    .collect::<Vec<_>>();
+
+                let prompt = ConfirmPrompt::new(&cmd_names[..]);
+                self.focus = Focus::ConfirmationPrompt(Float::new(Box::new(prompt), 40, 40));
             }
-
-            let cmd_names = self
-                .selected_commands
-                .iter()
-                .map(|node| node.name.as_str())
-                .collect::<Vec<_>>();
-
-            let prompt = ConfirmPrompt::new(&cmd_names[..]);
-            self.focus = Focus::ConfirmationPrompt(Float::new(Box::new(prompt), 40, 40));
-        } else {
-            self.go_to_selected_dir();
+            SelectedItem::None => {}
         }
     }
 
@@ -725,34 +799,56 @@ impl AppState {
     }
 
     fn refresh_tab(&mut self) {
-        self.visit_stack = vec![self.tabs[self.current_tab.selected().unwrap()]
-            .tree
-            .root()
-            .id()];
+        self.visit_stack = vec![(
+            self.tabs[self.current_tab.selected().unwrap()]
+                .tree
+                .root()
+                .id(),
+            0usize,
+        )];
         self.selection.select(Some(0));
+        self.filter.clear_search();
         self.update_items();
     }
 
     fn toggle_task_list_guide(&mut self) {
         self.spawn_float(
-            FloatingText::new(ACTIONS_GUIDE.to_string(), "Important Actions Guide"),
+            FloatingText::new(ACTIONS_GUIDE.to_string(), "Important Actions Guide", true),
             80,
             80,
         );
     }
+
+    fn scroll_tab_down(&mut self) {
+        let len = self.tabs.len();
+        let current = self.current_tab.selected().unwrap_or(0);
+        let next = if current + 1 >= len { 0 } else { current + 1 };
+
+        self.current_tab.select(Some(next));
+        self.refresh_tab();
+    }
+
+    fn scroll_tab_up(&mut self) {
+        let len = self.tabs.len();
+        let current = self.current_tab.selected().unwrap_or(0);
+        let next = if current == 0 { len - 1 } else { current - 1 };
+
+        self.current_tab.select(Some(next));
+        self.refresh_tab();
+    }
 }
 
 #[cfg(feature = "tips")]
 const TIPS: &str = include_str!("../cool_tips.txt");
 
 #[cfg(feature = "tips")]
-fn get_random_tip() -> &'static str {
+fn get_random_tip() -> String {
     let tips: Vec<&str> = TIPS.lines().collect();
     if tips.is_empty() {
-        return "";
+        return "".to_string();
     }
 
     let mut rng = rand::thread_rng();
     let random_index = rng.gen_range(0..tips.len());
-    tips[random_index]
+    format!(" {} ", tips[random_index])
 }

tui/src/theme.rs

@@ -28,6 +28,13 @@ impl Theme {
         }
     }
 
+    pub fn multi_select_disabled_color(&self) -> Color {
+        match self {
+            Theme::Default => Color::DarkGray,
+            Theme::Compatible => Color::DarkGray,
+        }
+    }
+
     pub fn tab_color(&self) -> Color {
         match self {
             Theme::Default => Color::Rgb(255, 255, 85),

xtask/src/docgen.rs

@@ -11,7 +11,7 @@ pub fn userguide() -> Result<String, DynError> {
     let mut md = String::new();
     md.push_str("<!-- THIS FILE IS GENERATED BY cargo xtask docgen -->\n# Walkthrough\n");
 
-    let tabs = linutil_core::get_tabs(false).1;
+    let tabs = linutil_core::get_tabs(false);
 
     for tab in tabs {
         #[cfg(debug_assertions)]
@@ -24,7 +24,7 @@ pub fn userguide() -> Result<String, DynError> {
                 #[cfg(debug_assertions)]
                 println!("  Directory: {}", entry.name);
 
-                if entry.name != "root".to_string() {
+                if entry.name != "root" {
                     md.push_str(&format!("\n### {}\n\n", entry.name));
                 }
 
@@ -36,18 +36,16 @@ pub fn userguide() -> Result<String, DynError> {
                         current_dir
                     ));
                 } */ // Commenting this for now, might be a good idea later
-            } else {
-                if !entry.description.is_empty() {
-                    #[cfg(debug_assertions)]
-                    println!("    Entry: {}", entry.name);
-                    #[cfg(debug_assertions)]
-                    println!("      Description: {}", entry.description);
+            } else if !entry.description.is_empty() {
+                #[cfg(debug_assertions)]
+                println!("    Entry: {}", entry.name);
+                #[cfg(debug_assertions)]
+                println!("      Description: {}", entry.description);
 
-                    md.push_str(&format!("- **{}**: {}\n", entry.name, entry.description));
-                } /* else {
-                      md.push_str(&format!("- **{}**\n", entry.name));
-                  } */ // https://github.com/ChrisTitusTech/linutil/pull/753
-            }
+                md.push_str(&format!("- **{}**: {}\n", entry.name, entry.description));
+            } /* else {
+                  md.push_str(&format!("- **{}**\n", entry.name));
+              } */ // https://github.com/ChrisTitusTech/linutil/pull/753
         }
     }